Record ID: LVPL-00B2B0
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published
A medieval silver annular brooch, formed of a decorated hoop, two flowers arranged symmetrically with the pin at the centre, and a constriction to hold the pin. There is some evidence of gilding still present and the hoop is also delicately engraved. Date: 13th - early 14th century
Created on: Wednesday 13th June 2007
Last updated: Tuesday 2nd August 2011
Spatial data recorded. This findspot is known as 'Normanby le Wold', grid reference and parish protected.

Record ID: LIN-3D3B51
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy annular brooch pin. The pin is circular in cross-section and bowed.
Created on: Friday 21st September 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NCL-7880B3
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A cast copper-alloy annular brooch of the Medieval period. The brooch is gilded and complete with it's pin. The frame is circular and undecorated. The pin tapes to a slightly hooked point, but has a discoid collar at its base, separating it from the loop hinge.
Created on: Thursday 18th October 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NCL-9C1035
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A cast copper-alloy annular brooch of the Medieval period. The hoop is circular in section with 2 projecting animal (lion?) heads set opposite each other and facing opposite directions. A narrowing of the frame provides a pin constriction, and the pin is complete with a simple wrap-around flattened section for the hinge.
Created on: Thursday 1st November 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NCL-B0E4D2
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A complete annular brooch of Medieval date. The brooch consists of a circular hoop and pin. The hoop is square in section with the only defining feature notable as two thickenings of the hoop on opposite sides. The pin is attached by a simple hinge with a length of 22.35mm and 1.41mm thick.
Created on: Friday 2nd November 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NLM-ED2908
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy medieval annular brooch. The flat circular frame is slightly bowed and misshapen. Around the frame are six tapering collets, two large ones and four smaller. The large collets are at opposite ends and have a set of two collets between them. Inside some of the collets are the remains of a white paste but none of the settings survive. Between two of the smaller collets is a circular pinhole for the missing pin, and at the opposite end the frame is slightly angled to act as a pin rest. The surviving length is 32.6mm, the width is 23.8mm, the thickness is 6.…
Created on: Thursday 29th November 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.

Record ID: NLM-FB2777
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A complete cast copper alloy medieval brooch. The annular frame has a pointed extension at one end to create a teardrop shape. The extension is decorated with a four-petal flower. The frame is divided into bands decorated with a fine net-like design alternating with plain. Looped around a constriction in the frame is a cast copper alloy pin, which has a transverse moulding. Traces of gilding survive on the front surface and the back is plain. The length is 32.8mm, the width is 25.1mm, the thickness is 2.7mm and the weight is 5.69g.
Created on: Wednesday 12th December 2007
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LIN-034FF1
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper alloy annular brooch. The frame is circular in cross-section and has a copper alloy pin.
Created on: Tuesday 4th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: DENO-8192F7
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published
Small gilded silver annular brooch, pentagonal with a raised circular boss at the centre of four of the sides, and the D-sectioned loop of the pin at the centre of the fifth side. The remainder of the pin is broken off. The circular bosses are decorated with raised pellets - one with 4, one with 3, and two with an uncertain number. The frame is D-sectioned. The reverse is plain and flat.
Created on: Monday 10th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Tupholme', grid reference and parish protected.

Record ID: LIN-AD89A0
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Complete medieval copper alloy annular brooch. The brooch frame is circular in cross-section and has a restriction for the pin. The pin is collared and intact. Parts of the frame and pin surface still retain evidence of silvering or tinning
Created on: Wednesday 12th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-D6A9C4
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper alloy sexfoil brooch dating the medieval period. The frame has six concave sides each with three notches creating four 'turrets'. The pin is secured either side of a notch on one side of the frame.
Created on: Friday 14th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Aunsby and Dembleby', grid reference and parish protected.

Record ID: LIN-6F6B02
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Fragment of a medieval copper alloy annular brooch. The brooch has a lozenge shaped frame in cross-section. The surface is undecorated.
Created on: Monday 2nd February 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Spilsby', grid reference and parish protected.

Record ID: NLM-BF3250
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published
The object is a silver penny of the Short Cross coinage which has been converted into a brooch. The coin was originally a silver penny of Short Cross class 5bi, issued in 1205 under King John. The moneyer was Pieres operating at Durham: the reverse inscription +PIERES.ON.DVR is virtually complete. The coin would have been produced to the established standard of the English medieval coinage, over 90% fine silver. The penny has been substantially altered and it could no longer be a functioning coin. The central section with the main design (king's head on the front, short double cross…
Created on: Wednesday 18th February 2009
Last updated: Tuesday 2nd August 2011
Spatial data recorded. This findspot is known as 'Yarburgh', grid reference and parish protected.

Record ID: DENO-69BBA7
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval cast copper alloy annular brooch, probably 14th century. Circular sectioned circular ring with constriction to take the cast copper alloy pin. The loop of the pin is not joined at its outer end; globular collar below the loop, decorated with incised diagonal lines (two of which form a cross); the remainder of the pin is broken off after the collar. Fine dark green patina. Diameter 31.2mm, thickness (i.e. diameter of frame) 3.2mm, weight 5.38g.
Created on: Thursday 26th February 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Tupholme', grid reference and parish protected.

Record ID: DENO-69DEB3
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval cast copper alloy miniature annular brooch with decorative frame13th/14th century. Frame made up of 6 oval swellings decorated with numerous irregularly placed incuse dots, with a narrowed transverse ridge between each (two ridges between the two swellings opposite the pin, forming a groove to take the pin); constriction to take the wire pin, which is broken off just after the loop. The frame is flat and undecorated on the reverse. Fine mid green patina. Diameter 16.3mm, thickness 2.8mm, weight 1.68g.
Created on: Thursday 26th February 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Tupholme', grid reference and parish protected.

Record ID: LIN-33F681
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published
A small silver Medieval annular brooch dating from the 13th Century, slightly oval in plan with seven raised collets set along the frame. The collets are now empty. The sections of frame between the collets are each decorated with four punched circles. The frame has a restriction for the pin, which is intact.
Created on: Wednesday 1st April 2009
Last updated: Tuesday 2nd August 2011
Spatial data recorded. This findspot is known as 'Pinchbeck', grid reference and parish protected.

Record ID: LIN-345531
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A small medieval silver annular brooch with twisted frame. The frame is decorated with a line of pellets between the ridges. The pin is intact though missing its terminal. As this find was made before the Treasure Act 1996 came into force, it would have fallen under Treasure Trove legislation. In order to qualify as Treasure an object had to be believed to have been buried with the intent of recovery. This brooch is likely to be the product of a casual loss, and therefore does not meet the criteria for Treasure.
Created on: Wednesday 1st April 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Ancaster', grid reference and parish protected.

Record ID: LIN-349D34
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published
A gilded silver annular brooch with pin intact. The frame has a narrowed section to secure the pin in place. One side of the brooch is inscribed +AMOR VINCIT OMNIA MVN+. The other side is decorated with an incised zigzagged line with a dot in each angle.
Created on: Wednesday 1st April 2009
Last updated: Thursday 22nd October 2020
Spatial data recorded. This findspot is known as 'Sleaford', grid reference and parish protected.

Record ID: LIN-34B1D4
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published
Treasure reference number: 2008 T595. Half of a silver gilt annular brooch. The frame has a restriction for the pin and is broken at this point. One side of the frame is decorated with a hatched background against which are the letters [IESU N]AZARE. The letters probably formed part of the popular inscription 'Iesus Nazarenus Rex Iudeorum' ('Jesus of Nazareth, King of the Jews). The reverse is undecorated.
Created on: Wednesday 1st April 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Lenton, Keisby & Osgodby', grid reference and parish protected.

Record ID: LVPL-CC0CC1
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy Medieval annular brooch. Circular in plan it has a circular cross section. It is grooved all over both surfaces with diagonal lines. The pin is made from a piece of folded wire
Created on: Wednesday 8th April 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-75A064
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A cast copper alloy annular brooch. The frame is circular in plan and lozenge in cross-section. The frame has a restriction for the pin. Only the loop of the copper alloy pin remains.
Created on: Thursday 16th April 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-48CD05
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy pin from a Medieval annular buckle or brooch. It has a square cross-section throughout. It narrows to a point at the terminal where a slight groove can be seen, this has been made through wear against the buckle or brooch frame. It is broken at the opposite end which would have been a circular loop to attach the pin to the frame. Only around half now remains. Before the loop is a slight rectangular moulding acting as a collar decoration.
Created on: Sunday 26th April 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-48D6E7
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy Medieval annular brooch. The brooch is D-shaped in cross section, being slightly domed on the upper surface. It is oval in plan with the sides thickening on the curve, before narrowing at the ends. At one end is the narrowed and offest strap bar. The pin is formed from a strip of copper alloy folded over. It is incomplete having broken after just 8.35mm. At the opposite end are four ridges, radiating out from the inside edge to the outside edge. The upper surface is decorated with two lines of irregular concave dots.
Created on: Sunday 26th April 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-2B98F3
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A complete cast copper alloy buckle brooch. The brooch is a pointed oval in plan and is decorated with six raised collets on the upper side of the frame. Each collet is circular and contains a domed piece of glass. Three collets contain green glass and three clear glass, set alternating in colour. The frame is angled inwards in cross-section and is stepped when viewed from the side. The perimeter step is very narrow. The sections of frame between the collects are decorated with two rows of punched circles. The frame is pierced and contains a copper alloy pin.
Created on: Thursday 7th May 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Sleaford', grid reference and parish protected.

Record ID: LIN-2BE023
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A small copper alloy annular brooch. The brooch has an oval frame that is rectangular in cross-section and has a small restriction for the pin. The frame appears to be decorated with punched dots. The frame has been silvered.
Created on: Thursday 7th May 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Sleaford', grid reference and parish protected.

• 

  Image not taken

Record ID: LIN-D62CD2
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A fragment of a medieval brooch, probably once quatrefoil or sexfoil in plan. Only two crescents of the frame remain, both of which contain two empty collets.
Created on: Wednesday 27th May 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'West Lindsey', grid reference and parish protected.

Record ID: NCL-2160E5
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A cast copper alloy annular brooch from the early Medieval period. The brooch is very small and is complete with the pin. There is no decoration, but the frame tapers from the outer edge to the inner edge, such that in section it is drop-shaped. The metal is a light brown colour with small intermittent patches of discolouration. A parallel can be found in Egan, G., Philpott, A. and Griffiths, D. (2007) Meols: The Archaeology of the North Wirral Coast, Oxford, 141, no. 1679.
Created on: Friday 10th December 2010
Last updated: Tuesday 14th December 2010
Spatial data recorded.

Record ID: PUBLIC-EC7B27
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper alloy, annular brooch of the medieval period. The brooch has a rounded, triangular section frame, giving two visible surfaces when it was worn. The inner upper surface of the frame is decorated with eight, circular depressions, each 2mm in diameter which may, originally have held stones. The outer upper surface of the frame is decorated with grooved, diagonal lines. Both decorated surfaces cover the lower half of the frame only, from the point where there is a recessed area to hold the pin to the opposite side of the frame where the pin rests. The back of the frame is plain a…
Created on: Thursday 13th January 2011
Last updated: Friday 14th January 2011
Spatial data recorded. This findspot is known as 'Skidbrooke', grid reference and parish protected.

Record ID: LIN-01CFF1
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper-alloy pin from a medieval buckle or brooch. The shaft is rectangular in cross-section and tapers to a point. The loop-end is incomplete and has a small raised crest on the top near the loop.
Created on: Friday 14th January 2011
Last updated: Friday 14th January 2011
Spatial data recorded. This findspot is known as 'Great Hale', grid reference and parish protected.

Record ID: PUBLIC-46D295
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper alloy, annular brooch of the medieval period. The brooch has a flattened oval section frame. The upper surface of the frame is decorated with two concentric circles of punched dots. The outer and inner edges of the frame are decorated with regular, incised notches, possibly made by filing. There is a recessed area to hold the pin. The back of the frame is plain and undecorated and very smooth. No file marks are evident. The cast copper-alloy pin is intact. The pin has a single, transverse decorative ridge just below its junction with the frame. The brooch has a deep brown glo…
Created on: Monday 17th January 2011
Last updated: Wednesday 19th January 2011
Spatial data recorded. This findspot is known as 'Skidbrooke', grid reference and parish protected.

Record ID: NCL-ACAF72
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A cast copper-alloy annular brooch of 13th-14th century date. The brooch is incomplete, missing the pin, but the frame has survived intact. The frame bears six moulded collets, each sub-rectangular in plan with a circular hole to act as a seting, the remains of a possible white paste remaining in one. Alternating with the collets are six vertical ridges tapering to a point. On opposite sides of the frame, and placed between two ridges are two pairs of collars that acted as a pin restriction and rest. In section, the frame is D-shaped.
Created on: Thursday 3rd February 2011
Last updated: Thursday 3rd February 2011
Spatial data recorded.

Record ID: NCL-868F42
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published
A cast silver annular brooch of the 14th century. The brooch is lozenge-shaped in plan with six floral bosses, four place on the centre of each arm of the frame and two on the corners. The two remaining corners have a collar to either side of the corner to act as a guide for the pin hinge and an undecorated boss with a rectangular slot to function as a pin rest. The underside of the brooch is flat and undecorated. The pin is missing.
Created on: Tuesday 22nd March 2011
Last updated: Wednesday 20th March 2013
Spatial data recorded. This findspot is known as 'Revesby', grid reference and parish protected.

Record ID: PUBLIC-85C676
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete, copper-alloy, Medieval, annular brooch. The section of flat, rectangular-sectioned frame is broken at both ends and is approximately one quarter of an octagonal brooch. Just before each break the frame swells out at an integrally-moulded, tall collet. These collets each contain traces of white paste, but none of the settings survive. Between this pair of collets is a dome-headed rivet that secures a lozenge-shaped, copper-alloy sheet flat against the frame. The sheet is stamped with two concentric squares of beading. The rivet passes through a hole, drilled through the …
Created on: Friday 15th April 2011
Last updated: Wednesday 4th May 2011
Spatial data recorded. This findspot is known as 'Skidbrooke', grid reference and parish protected.

Record ID: PUBLIC-93E251
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete, copper-alloy, Medieval, annular brooch. The section of frame is broken at both ends and consists of three sides of an octagonal brooch. Each side of the frame has a centrally-place, moulded collet with a hollowed centre. Between each collet, the frame is drilled with a small indentation. At the corner of each side, between each collet, the frame extends outwards to form a point. The inside edge of the frame is straight and continuous. The reverse of the frame is smooth, flat and undecorated. At the point of breakage on one end, a hole has been drilled through the frame,…
Created on: Saturday 16th April 2011
Last updated: Wednesday 4th May 2011
Spatial data recorded. This findspot is known as 'Skidbrooke', grid reference and parish protected.

Record ID: SWYOR-E5DA21
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper alloy annular brooch possibly dating from the Medieval period, probably 1200 - 1400 AD. It is ovoid in shape with six raised circular settings on the front that would have at one point held decorative stones. Two still contain white paste. There is a hole in the frame for the pin, but it is now missing. It has a length of 25.03mm, width 20.93mm, thickness 2.42mm, weight 3.03g. A similar example but round is SF-53CDA2 on the PAS database.
Created on: Tuesday 8th June 2010
Last updated: Sunday 7th June 2020
Spatial data recorded.

Record ID: LIN-102C86
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper-alloy brooch in the form of a quatrefoil. Each side of the frame is decorated with two transverse ribs. The pin is intact.
Created on: Thursday 10th June 2010
Last updated: Thursday 10th June 2010
Spatial data recorded.

Record ID: LIN-109177
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper-alloy annular brooch decorated with six circular turrets. Each turret is missing its setting. The frame is D-shaped in cross-section; the pin is missing.
Created on: Thursday 10th June 2010
Last updated: Thursday 10th June 2010
Spatial data recorded. This findspot is known as 'Folkingham', grid reference and parish protected.

Record ID: NCL-237AD0
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published
A miniature Medieval brooch, circular in shape, the reverse flat, but the front engraved with the design to give greater dimensionality. This consists of grooves, alternating with small, circular punches, to create the effect of twisted wire. The pin is intact and is held within a recess in the frame. The brooch is silver gilt and dates from the thirteenth century. Consequently, in terms of age and as the object contains a minimum of 10% precious metal it qualifies as Treasure under the stipulations of the Treasure Act 1996.
Created on: Friday 11th June 2010
Last updated: Tuesday 26th October 2010
Spatial data recorded. This findspot is known as 'Claxby with Moorby', grid reference and parish protected.

Record ID: LIN-778242
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published
A silver medieval annular brooch, late 13th/14th century. The frame is circular in plan, rectangular in cross-section and has a constriction for the now missing pin. The frame bears an inscription which starts to the right of the pin constriction and reads * CIL A MON VIE RI A LEAL with no stop marks. The brooch appears to have been gilded. There are at least two brooches on the PAS database with closely similar inscriptions, SWYOR-7F4A5E (reading *CIL A RON VIE: RIA LEAL M) and YORYM-F499A2 (reading *CIL:A MON VI:RIA:LEM-ME). It is difficult to explain what this inscription might …
Created on: Tuesday 15th June 2010
Last updated: Thursday 11th August 2016
Spatial data recorded.

Record ID: DENO-9FD3E0
Object type: BROOCH
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Flat silver sexfoil, probably from a Medieval silver annular brooch. Sexfoil with lines separating petals and central annulet; curved scar across the back, probably from attachment to a ring brooch. Length 7.2mm, width 6.1mm, thickness 1.3mm, weight 0.24g. Treasure Report: Date: late 13th-14th century Description: A Medieval silver annular brooch fragment consisting of a now detached applied flat sexfoil, decorated with a central punched annulet and incised lines defining the petals. On the back is the curved scar left by soldering the flower to the hoop of the brooch (width 2…
Created on: Thursday 17th June 2010
Last updated: Thursday 12th April 2012
Spatial data recorded. This findspot is known as 'Wragby', grid reference and parish protected.