Record ID: LEIC-AD2EF0
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Early Medieval? copper alloy brooch fragment, 32mm long, 15mm wide and 7mm thick. The object is in fair condition with a brownish patina and weighs 13.10grams. It is sub rectangular in form and section and is broken at both ends. It appears to form an animal head like those which appear on early Medieval brooches. It has a rounded upper edge with a flat top and a triangular sectioned 'snout' which terminates with a flat edge.
Created on: Tuesday 21st August 2007
Last updated: Friday 10th June 2016
Spatial data recorded. This findspot is known as 'nr Melton', grid reference and parish protected.

Record ID: LEIC-679795
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Published
Early Medieval copper alloy cruciform brooch fragment, 50mm long, 44mm wide and 10mm thick. The brooch is in fair condition with a brownish patina and weighs 19.54g. The object has been well made but is suffering from various forms of corrosion. It consists of a central headplate which has a large central panel, with a thin recessed panel at each side. Attached to this are three integrally cast half-round knobs; each is identical, with a base and waist below the hemispherical dome. They are distinctly rounded, not elongated as many knobs are. A short stub of the bow is present, …
Created on: Tuesday 11th September 2007
Last updated: Monday 8th April 2019
Spatial data recorded.

Record ID: LEIC-0E83C3
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Published
Early Medieval copper alloy small long brooch fragment, 45.3mm long, 25mm wide and 10.6mm thick. The object is in fair condition with a green patina and weighs 10.28 grams. The object consists of a rectangular headplate which is decorated with a border of incised circles, 1mm in diameter. There are two triangular notches in the lower edge, one on each side of the bow. The bow is short, curved and has a flat triangular shaped terminal on each edge, the point of which joins the central ridge which runs its length. Below this the object is flat and rectangular in form with three raised h…
Created on: Monday 1st October 2007
Last updated: Monday 8th April 2019
Spatial data recorded.

Record ID: LEIC-218570
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Published
Early Medieval copper alloy brooch fragment, 44.8mm long, 9.2mm wide and 4mm thick. The object is in poor condition with a brown patina and weighs 4.54grams The object consists of the lower part of a cruciform brooch which is missing a lot of its surface. It is rectangular in form and begins with a stylised animal head which is sub semi-circular in section and has bulging eyes. There is a rectangular area above it which may have a decorated border. The reverse shows the base of a long catchplate.
Created on: Tuesday 2nd October 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-B99CE7
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Published
Early Medieval copper alloy brooch fragment, 40mm long, 8mm wide and 4mm thick. The object is in fair condition with a green patina and weighs 5.48grams. The object forms the terminal of a cruciform brooch. It is rectangular in form and section and has a stylised animal head forming most of its surface. The object is very worn but the animal eyes can just be seen close to its centre.
Created on: Tuesday 9th October 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-5C1F57
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Published
Early Medieval copper alloy cruciform brooch fragment, 68.4mm long, 50.4mm wide and 18.7mm thick (at bow) weight unknown. The brooch is good condition and has a good green patina. The brooch consists of a rectangular shaped head plate with two trapezoidal side plates, all plain. There are two integral semi circular(?) knops. The small bow has a triangular section with a visible ridge down its centre. Below this is a small section of rectangular bow which has two sub rectangular lappets, with central rounded protrusions, attached. At this point the brooch has snapped, probably due to p…
Created on: Wednesday 17th October 2007
Last updated: Monday 8th April 2019
Spatial data recorded.

Record ID: LEIC-604DE5
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Published
Early Medieval (Anglo-Scandinavian) copper alloy disc brooch, 18mm long, 15mm wide and 2mm thick. The object is in poor condition with a reddish patina and weighs 5.59grams. The brooch, which would have been circular in form, is missing nearly all of its orginal surface and is badly worn. It clearly shows its Borre knot design of a central circular depression surrounded by a concaved sided lozenge motif, which has from each corner double strand interlace emerging in a knotted formation. The reverse of the brooch contains a turned catchplate aligned with the edge of the brooch and oppo…
Created on: Monday 29th October 2007
Last updated: Monday 26th November 2018
Spatial data recorded.

Record ID: LEIC-1BF711
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Published
Early Medieval copper alloy small-long brooch, 42mm long, 25mm wide and 7mm thick, the brooch is in fair condition with a green patina and weighs 4.27grams. Around the head plate are the remains of three projections which were originally circular with central perforation to produce an annular shape.
Created on: Wednesday 7th November 2007
Last updated: Friday 26th January 2018
Spatial data recorded.

Record ID: LEIC-80FA38
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Published
early Medieval copper alloy and gold brooch fragment, 36mm long, 20mm wide and 10mm thick. The brooch is in poor condition with a powdery green patina and weighs 16.82grams. The object consists of a curved bow which has a raised rectangular protrusion in its centre which is picked out in gold. part of the head plate survives and is decorated with incisions picked out in gold. behind this is a two semi-circular copper alloy lugs which hold the remains of an iron pin.
Created on: Thursday 6th December 2007
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LEIC-ADABE0
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Early medieval copper alloy cruciform brooch fragment, 19mm long, 8mm wide and 7mm thick. The object is in fair condition with a brown patina and weighs 2.17grams. The object consists of the upper part of the brooch and has a small rectangular head plate with a single knop on its upper edge. The sides are missing but the head plate has traces of the bow emerging from its base. The reverse has a circular lug which is corroded with iron.
Created on: Friday 31st October 2008
Last updated: Monday 8th November 2021
Spatial data recorded.