Database search results

Back to simple search | Back to advanced search

    You searched for:

    • Idby: 0014358F907011B7
    • Page: 15

  • Thumbnail image of WAW-0CC31B

Record ID: WAW-0CC31B
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman brooch, possibly a large south-western T-shaped type: The copper alloy brooch is fragmentary, it has the remains of a large head plate. On the outer face the plate is decorated with a row of notches across the base, the row above off-set and decorated with small low-relief ring-and-dots. The row above is decorated with small high-relief square blocks and then the edge of the plate is broken. The reverse of the plate, along the lower edge has an integral, horizontal cylinder with a slot in the centre. The bow protrudes from the lower edge of the plate, on the outer face which is a…
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-0CC0B1
Object type: BELL
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of post-medieval white-metal clapper bell, cast trapezoidal cannon with drilled perforation, crown staple and lower part missing, less than half survives. Extant height 37mm. Extant diameter c.34mm. Weighs 17.12g. Later 16th-18th century.
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-0CB6DF
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy double-looped buckle frame, both loops oval, length 22.4mm, width 17.2mm. Mid 14th - 15th century.
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Thumbnail image of NARC-0CAAD3

Record ID: NARC-0CAAD3
Object type: COIN
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A complete Post-Medieval Venetian silver soldino of Doge Leonardo Loredan (1501-1521). Mint of Little Venice. Diameter: 12.31mm, Thickness: 0.38mm, Weight: 0.1g. Obverse: [LE•LAV•DVX]•S•M•V•, Doge, as standard bearer of Venice, kneeling left, receiving the banner of St. Mark from the patron saint. Reverse: [LA]VS[•TIB]I•SOL[I•] (Thee alone be praised), Standing figure of Christ with halo, holding a cross, X C (possibly) abbreviation for Christ below.
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-0C90C0
Object type: BELL
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
2 non-joining parts of post-medieval white-metal clapper bell, one with a cast trapezoidal cannon with drilled perforation, corroded iron crown staple. Lower part missing, less than half survives. Extant height 43mm. Extant diameter 32mm; the other part a fragment of the mouth only, diameter 50mm. Combined weight 49.87g. Later 16th-18th century.
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-0C8EF7
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two medieval sheet copper alloy buckle plates, both with a pin slot, frame recesses and three rivet holes, 13th - 14th century: - rectangular, widthways row of rivet holes, very worn, faint signs of a transverse groove along the inside edge, rear part incomplete, length and width 20.4 and 27.5mm. - front part only, trilobed (cf. Whitehead 2003, no. 48), broken at the fold, one convex-headed rivet remaining, gilt with traces of curvilinear engraved decoration and a transverse line of rocker-arm next to the pin slot, length and width 29.5 and 25.2mm.
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Thumbnail image of WAW-0C8EBF

Record ID: WAW-0C8EBF
Object type: COIN
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval coin: shilling of James I (1603-1625) minted in London between 1604 and 1605. North No. 2073.
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Thumbnail image of NARC-0C79B2

Record ID: NARC-0C79B2
Object type: COIN
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver Half Penny of Henry VI (AD 1422-1461). First Reign. Plain Issue. Long cross reverse with three pellets in each quadrant. London mint. AD 1427-1430. Diameter: 14.94mm, Thickness: 0.53mm, Weight: 0.4g.
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-0C66C6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Two medieval copper alloy trapezoidal buckle frames, both with an offset, narrowed bar, a ridge on the exterior of the sides at each corner, and five filed grooves on the thick outside edge, second half 14th century: - bar worn thin at the centre, length and width 16.4 and 15.8mm. - length and width 19.3 and 22.5mm.
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Thumbnail image of WAW-0C44EB

Record ID: WAW-0C44EB
Object type: COIN
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver halfcrown of Charles I (1625-1649), Group IV, initial mark is an triangle-in-circle so is minted between AD 1641 to 1643, North 2214.
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Thumbnail image of NARC-0C3640

Record ID: NARC-0C3640
Object type: COIN
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver Farthing of Edward I (AD 1272-1307). North Class 2, Withers Type 7. Long cross reverse with three pellets in each quadrant. London mint. AD 1279. Diameter: 12.70mm, Thickness: 0.54mm, Weight: 0.3g. The coin is missing small portions of the outer flan at 1 and 8 o'clock North Vol II, P 33, No 1052
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Thumbnail image of NARC-0C1E14

Record ID: NARC-0C1E14
Object type: BROOCH
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy, Hinge Headed Brooch of Roman date (AD 43-200). The now missing pin would have been hinged from the axis bar which is held within the transverse cylinder which is broadly circular in cross-section, forming the wings. The cylinder is attached to a broadly rectangular in cross section neck which then attaches at a 90 degree angle to the lozenge shaped plate. The lozenge plate is flat and has a flat outer rim. The plate has then been dived in to five cells, a central square within the lozenge with a raised border which creates four triangular cells between the o…
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Thumbnail image of WAW-0C147F

Record ID: WAW-0C147F
Object type: COIN
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval coin: silver Venetian soldino of Agostin Barbarigo, Doge of Venice, dating from AD 1486 - 1501, minted in Venice. Soldinios were known as the galyhalpens (galley-halfpence) as it was brought by the annual Venetian trading fleets. The soldino was about the size of English halfpennies and was popular because of a contemporary lack of small change: soldini in fact occur as English finds more often than proper halfpennies of the period. Coins of Barbarigo are rarely found except for along the south coast of England (Daubney, unpublished, Identifying late Medieval Venetian coins)…
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Thumbnail image of WAW-0BEE98

Record ID: WAW-0BEE98
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman coin: Copper alloy nummus of the House of Constantine, dating to AD 347-8 (Reece Period 17), reverse is VICTORIAE DD AVGGQ NN depicting two Victories, facing each other, each holding a wreath.
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Thumbnail image of WAW-0B6118

Record ID: WAW-0B6118
Object type: COIN
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman coin: A silver denarius of Trajan dating to AD 114 to 117 (Reece Period 5). Reverse type is PARTHICO P M TR P COS VI P P S P Q R PRO VID depicting Providentia, draped, standing left, pointing with right hand at large globe to left, and holding vertical sceptre in left, with left elbow resting on column, Rome mint.RIC Vol II p. 269 No 361. The coin is in particularly poor condition.
Created on: Monday 26th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Thumbnail image of IOW-0213A3

Record ID: IOW-0213A3
Object type: WEIGHT
Broad period: UNKNOWN
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
A complete lead alloy pendant weight of Unknown date (c. AD 43-c. 1800). This weight is sub-rectangular in plan and cross-section. The front and rear have irregular depressions and each side is convex. It is pierced at one end with a hole, 1.7mm in diameter. The opposite end is sub-rounded in plan. The weight is in good condition and has a buff patina overall. Length: 41.7mm; width: 9.2m; thickness: 7.8mm. Weight: 16.16g.
Created on: Sunday 25th June 2017
Last updated: Tuesday 27th June 2017
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of KENT-ED4CB9

Record ID: KENT-ED4CB9
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy rotary casket key of Medieval date. The bow is cicular and attached to the shank just above the mid-point. The shank is sub-rectangular in section and has a cyclindrical end. The bit is relatively simple in form, it is sub-rectangular with a small square cleft cut out on either side. The key is light green in colour. A number of very similar rotary keys are shown in G. Egan's 'Medieval Households' pages 111-119, more specifically, number 298, p.g 112.. From the size of the key and the presence of a hollow shank it is likely that the key would have been used to …
Created on: Saturday 24th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Thumbnail image of KENT-ECC922

Record ID: KENT-ECC922
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A complete medieval lead circular seal matrix dating between 1200 - 1350. The front of the matrix comprises a central design of an incised cross with leaf like arms, a central dot all within a circular border dividing it from the legend.. Around this is engraved the inscription which clearly reads "+S'.IOhIS:FIL:IOh" (Seal of John son of John). The initial cross takes on the form of 5 pierced dots. The back is flat and plain other than an incomplete suspension lug likely snapping across the pierced suspension loop. The seal matrix is chipped and abraded in 2 parts around the circumfe…
Created on: Saturday 24th June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Thumbnail image of KENT-D3826E

Record ID: KENT-D3826E
Object type: VESSEL
Broad period: BRONZE AGE
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A body sherd fragment of probable Bronze Age to Iron Age date (c.1000-1 BC). The sherd fragment is of a coarse black handmade fabric on the exterior with a black colour on the interior. It has a black unoxidised core and is tempered with angular poorly sorted flint inclusions. The sherd measures 22.9mm in length, 19.5mm in width, 7.7mm thick and weighs 4.11 grams.
Created on: Friday 23rd June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


  • Thumbnail image of KENT-D37496

Record ID: KENT-D37496
Object type: VESSEL
Broad period: BRONZE AGE
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A body sherd fragment of probable Late Bronze Age to Early Iron Age date (c.1000 - c. 600 BC). The sherd fragment is of a coarse red handmade fabric on the exterior with a black colour on the interior. It is irregularly fired, and is tempered with angular poorly sorted flint inclusions. The sherd measures 29.2mm in length, 20.6mm in width, 12.7mm thick and weighs 6.81 grams.
Created on: Friday 23rd June 2017
Last updated: Monday 26th June 2017
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 740,492
Search server index: asgard

You are viewing records: 281 - 300.

Search statistics

  • Total quantity: 1,135,812
  • Mean quantity: 1.534
  • Maximum: 52,504

Filter your search

281 - 300 of 740,492 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.