Record ID: LIN-06EFE1
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Incomplete cast copper alloy buckle. The buckle is rectangular and missing its side frame and bar. The lip is widened.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-072646
Object type: PIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy pin head. The head is bi-conical and has a small length of incomplete shank below. The diameter of the shank is 2mm
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-0735F7
Object type: CASTING WASTE
Broad period: BRONZE AGE
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy jet with a shaped runner below. The jet is derived from casting in bronze. The jet is oval in plan, slightly concave on its upper surface and convex on its underside representing the depression in the clay or other mould material which was filled with molten metal. Projecting from the convex underside is an irregularly shaped runner. The runner is roughly oval in plan with a clean, slightly curved terminal. The surface of the terminal is much smoother than the rest of the object, suggesting that it was cut at this point to detach the runner from the freshly cast objec…
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-078CC8
Object type: CASTING WASTE
Broad period: BRONZE AGE
County: Lincolnshire
Workflow stage: Awaiting validation
A small irregularly shaped piece of casting waste. The fragment has a very pitted surface.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-0796C3
Object type: VESSEL
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Lead pot mend. The mend has two irrgularly shaped caps with a joining shank between in the centre. No pottery survives between.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-07A406
Object type: MANUFACTURE AND PROCESSING
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Unworked piece of Jet. The piece is roughly trapezoid in plan and rectangular in cross-section. The edges and fractures are very worn and smooth suggesting that it has been a piece collected off the Lincolnshire coast, which lies only a few miles to the east. Although the piece is unworked the field in which it was discovered has also produced evidence for Roman occupation. Since Jet was used as a material for beads and bracelets it was thought best to record this piece incase more evidence arises.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-07C426
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: LIN-07F9E6
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Blundered soldier on horseback riding down an enemy.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-082455
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-0837D1
Object type: VESSEL
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Sherd of samian ware. The sherd is flat, roughly rectangular and undecorated. The surface has a worn buff red slip.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-084C78
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Worn silver half penny, probably Edward III.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-088E16
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Contemporary copy of an Edward III penny
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-089F74
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Scottish penny of Alexander III, Berwick mint.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-08E808
Object type: BRACELET
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Probable fragment of a copper alloy bracelet. The bracelet is oval in cross section, curved and has one incomplete end and one complete terminal. The complete terminal is slightly expanded with a flat face. The incomplete end is tapered and very worn.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-B17B85
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy of radiate of Claudius II.
Created on: Wednesday 16th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-B199F5
Object type: FINGER RING
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy finger ring. The ring has a circular hoop with a raised bezel containing a circular glass setting. The setting is black/purple in colour and is probably made of glass. The surface of the copper alloy is very worn and pitted.
Created on: Wednesday 16th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-B1CAE4
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy flat disc brooch. The brooch has a raised perimeter enclosing a raised triskele motif with a pellet in the centre. The surrounding recessed fields would once have been enamelled however only a small patch of red enamel now remains within the triskele itself. There is a pin lug and worn catchplate on the reverse. The pin is missing. Flat disc brooches date to the late 1st/2nd century and are a British product.
Created on: Wednesday 16th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-DB6F46
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Headplate and partial bow from an Anglo-Saxon small long brooch. The brooch has a square headplate with three incomplete circular side wings. There is a punched ring and dot motif in the centre of the headplate and another in the centre of the top wing. The bow is arched and decorated with two transversly incised lines.
Created on: Friday 18th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'North Hykeham', grid reference and parish protected.

Record ID: LIN-DBA482
Object type: GIRDLE HANGER
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Fragment of a copper alloy Anglo-Saxon girdle hanger. The hanger has a trapezoid plate with a pierced hole in either bottom corner. There are two side stems with incomplete terminals, and an incomplete central stem. The surface of one side of the plate is decorated with a perimeter of punched circles, and four larger punched circles evenly spaced around the centre.
Created on: Friday 18th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'North Hykeham', grid reference and parish protected.

Record ID: LIN-159F02
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Incomplete cast copper alloy buckle with integral plate. The buckle frame is 0val with a moulded knop at either corner. The plate is flat and does not contain a rivet hole. The buckle is probably for a spur, as per Egan, 2002 fig. 68.
Created on: Monday 21st May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.