Database search results

Back to simple search | Back to advanced search

    You searched for:

    • Idby: 0013EBA338E0165D
    • Page: 98

  • Image not taken

Record ID: SF-1C841B
Object type: STRAP END
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy strap end of Medieval date. It has a shield shaped plate with semi-circular notches to each side, and a curved attachment end that has a projecting triangular knop. At the outer edge is a separately cast rectanglar bar mount that is semi-circular in section with rounded front and concave back face,held in place by a separately cast copper-alloy rivet with flattened heads and rectangular rove on the back face. A second rivet hole, missing its rivet due to old breaks, is visible at the attachment end. The entire object measures 23.78mm in length, 18.62mm in width, 3.24mm i…
Created on: Monday 16th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded. This findspot is known as 'Icklingham', grid reference and parish protected.


  • Image not taken

Record ID: NMS-1C82F9
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval lead alloy annular framed buckle with a central bar on which there the remains of an iron pin loop. For use with a shoe (Egan and Pritchard 1991, 66, nos. 215-9). Diameter 20.5mm. c.1420 - c.1500 Field SH1
Created on: Monday 16th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded.


  • Thumbnail image of NMGW-1C7664

Record ID: NMGW-1C7664
Object type: MOUNT
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation Find awaiting validation
Late medieval to post medieval copper alloy hooked mount, probably from a book The mount is sheet copper alloy (1.0mm thick), is near-complete and is comparatively large (with a length of 53.8mm and a weight of 11.2g). The hook (17.0mm wide) is turned to the underside (with a depth of 7.8mm). The sides of the mount are straight and parallel (with a width of 36.4mm) and the unhooked end has two chevrons cut in. The sides are decorated with a linear border containing hatched incised lines. The two chevrons are also enhanced with incised marks. There are two open decorative circular hol…
Created on: Monday 16th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded.


  • Thumbnail image of SOM-1C6460

Record ID: SOM-1C6460
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Medieval cast copper alloy strap slide. The frame is five sided with a wide flat base, sides that slope outwards slightly and a peak in the centre of the top bar. The sides and base are rectangular in cross section and the top bar is D shaped with a flat inner side. There is a hole through the base of the frame, half way along and off centre, which would have held a separate circular rivet, now missing. The frame is 26.5mm long, narrowing to 23.2mm, 17.2mm tall and 1.6mm thick on the base, it weighs 2.41 grams. Egan and Pritchard (1991) illustrate a very similar example (page 231, fig …
Created on: Monday 16th February 2015
Last updated: Thursday 19th February 2015
Spatial data recorded. This findspot is known as 'Chiselborough CP', grid reference and parish protected.


  • Thumbnail image of NMGW-1C6239

Record ID: NMGW-1C6239
Object type: BUCKLE
Broad period: MEDIEVAL
County: Monmouthshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle frame of mid-12th to 14th century date The buckle frame is oval with ornate outside edge and is missing the pin (with a length of 18.5mm and a weight of 3.2g). The outside edge is expanded and of sub-triangular section (18.5mm long, 5.8mm wide and 4.7mm thick) and decorated on the front and rear with fine ribs and grooves. A pair of ribs near the centre flank a central groove which would have been a notch for the pin. The sides are convex (giving the buckle a width of 18.8mm) and of sub-rectangular section (3.3mm thick and 1.8mm wide). The sub-square-sect…
Created on: Monday 16th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded.


  • Image not taken

Record ID: SF-1C5D45
Object type: STRAP END
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy composite strap end of Medieval date.Only the incomplete forked spacer survives, the remainder now missing due to old breaks. The spacerhas a circular plate with large central circular aperture. At the top of the plate extend two tapering triangular prongs that form the forked spacer, both of which arenow incomplete due to old breaks. From the bottom centre of the plate projects an integral terminal knop. This is acorn shaped in form with a transverse collar separating the knop from the plate. The entire object measures 36.90mm in length (incomplete), 21…
Created on: Monday 16th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded. This findspot is known as 'Icklingham', grid reference and parish protected.


  • Thumbnail image of NMGW-1C4600

Record ID: NMGW-1C4600
Object type: BUCKLE
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Late Medieval copper alloy buckle of 15th century date The buckle is incomplete, missing the majority of the frame and the back-plate (with a length of 55.5mm and a weight of 10.4g). The frame was likely to have been of oval form (with a surviving length of 10.0mm and a surviving width of 30.2mm) and is of sub-rectangular section (3.7mm wide and 3.2mm thick) decorated, at least on the sides with transverse grooves. The circular-sectioned copper alloy pin survives (with a length of 33.5mm and a diameter of 2.5mm), secured in an oval aperture behind the frame, where the buckle narrows …
Created on: Monday 16th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded.


  • Thumbnail image of SWYOR-1C3273

Record ID: SWYOR-1C3273
Object type: TOBACCO HOLDER
Broad period: POST MEDIEVAL
County: Kirklees
Workflow stage: Awaiting validation Find awaiting validation
A metal (probably lead alloy) tobacco jar and lid dating from AD 1700 - 1900. The jar is complete. It is in the form of a male head with a pronounced nose, and a flat topped, brimmed hat. The hat forms the lid and can be removed to reveal the hollow inside the head where the tobacco would have been kept. Another example of this tobacco jar can be seen on http://www.pijpenkabinet.nl/Smokiana/HHH-E-tabakspotten.html
Created on: Monday 16th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded.


  • Image not taken

Record ID: SF-1C3223
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy buckle plate of Medieval date. It is rectangular in form with rectangular frame recesse and pin slot, missing the lower plate due to old breaks. At each corner of the outer edge, and at the cntre of the frame end, are single circular rivet holes missing their rivets due to old breaks. The front face of hte plate has the remains of gilding. It measures20.65mm in length, 8.86mm in width, 0.43mm in thickness, and 0.44g in weight. This buckle plate is of probable Medieval date, c.13th-15th centuries AD.
Created on: Monday 16th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded. This findspot is known as 'Icklingham', grid reference and parish protected.


  • Image not taken

Record ID: SF-1C290C
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy buckle plate of Medieval date. It is rectangular in form with upper and lower plate of equal size, missing the outer edge of the attachment end due to old breaks. The plate has rectangular frame recesses and pin slot, with a separately cast, single central rivet at the attachment end. It measures 24.34mm in length, 9.66mm in width, 3.55mm in thickness, and 1.70g in weight. This buckle plate is of probable Medieval, if not slightly later, date, c.13th-15th centuries AD.
Created on: Monday 16th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded. This findspot is known as 'Icklingham', grid reference and parish protected.


  • Thumbnail image of SOM-1C2529

Record ID: SOM-1C2529
Object type: FINGER RING
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Fragment of a Roman copper alloy ring with integral raised copper alloy bezel, probably of Guiraud / Henig Type 2 (1974, fig.1), which are thought to date to the 1st or 2nd century. The remaining section of the ring consists of the bezel and shoulders, both of which end in old, worn breaks and one of which is bent out of shape. The shoulders widen evenly and thicken slightly from the broken ends to the oval bezel and are D-shaped in section with a flat inner side and shallowly convex outer side. On the front are incised lines, one line paralleling and just inside each edge, these conti…
Created on: Monday 16th February 2015
Last updated: Thursday 19th February 2015
Spatial data recorded. This findspot is known as 'West Knoyle CP', grid reference and parish protected.


  • Thumbnail image of SOM-1BAE6A

Record ID: SOM-1BAE6A
Object type: JETTON
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval Nuremberg copper-alloy jetton of Hans Krauwinckel II (fl. 1586-1635) dating to the period AD 1586-1635, of the 'Rose / orb' type, reverse legend: VERBVM DOMINI MANET IN ETERN (translated as: The Word of God endureth forever (from 1 Peter 1:24-25)).
Created on: Monday 16th February 2015
Last updated: Thursday 19th February 2015
Spatial data recorded.


  • Thumbnail image of PAS-1AE64C

Record ID: PAS-1AE64C
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper-alloy Colchester derivative brooch with a double pierced lug spring attachment, incomplete in so far as it is missing part of its spring mechanism and pin, dating to the 1st centuryAD. The double pierced lug is situated behind the head as is characteristic of this type, with a cusping at the front between the perforated lobes. The sprung pin is missing, as is half of the chord and coils. The side of coils that survives has six twists. The chord is retained within a lug, as noted. The lug is narrowed compared to the head and features a decorative transverse groove above t…
Created on: Monday 16th February 2015
Last updated: Sunday 22nd February 2015
Spatial data recorded.


  • Thumbnail image of IOW-1A0AB0

Record ID: IOW-1A0AB0
Object type: BROOCH
Broad period: ROMAN
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper-alloy Hod Hill brooch (AD 43-75). Hattatt Class B (with side knobs/lugs). The head, one arm and side knob/lug and the pin are missing. The front of the bow and surviving arm has vertical ridges and grooves that form fluting. The front of the leg has horizontal ridges and grooves forming wide fluting. At the rear, the surface is plain and has an almost complete catch-plate. The curled-over part of the catch-plate that secured the pin-tip is missing. This brooch is pitted and matt green overall. The breaks are old and abraded. No tinning can be seen. Height…
Created on: Monday 16th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of PUBLIC-135BFD

Record ID: PUBLIC-135BFD
Object type: COIN
Broad period: POST MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Henry VIII 'sovereign type' penny of Durham, struck at the Ecclesiastical mint of Bishop Thomas Ruthall. Initial mark lis Spink 2332; North 1777
Created on: Monday 16th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded. This findspot is known as 'Hardwicke', grid reference and parish protected.


  • Thumbnail image of PUBLIC-1333B1

Record ID: PUBLIC-1333B1
Object type: COIN
Broad period: MODERN
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Henry VIII posthumous groat of Canterbury. Sixth bust. Spink 2408; North 1875
Created on: Monday 16th February 2015
Last updated: Friday 20th February 2015
Spatial data recorded. This findspot is known as 'Hartpury', grid reference and parish protected.


  • Thumbnail image of PUBLIC-13069C

Record ID: PUBLIC-13069C
Object type: COIN
Broad period: MEDIEVAL
Workflow stage: Awaiting validation Find awaiting validation
Henry VII facing bust halfgroat of Canterbury; initial mark, tun Spink 2209-2211; North 1712
Created on: Sunday 15th February 2015
Last updated: Monday 16th February 2015
No spatial data available.


  • Thumbnail image of PUBLIC-12D4D6

Record ID: PUBLIC-12D4D6
Object type: COIN
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Edward IV second reign penny of the York Ecclesiastical mint of Archbishop Thomas Rotherham Spink 2134; North 1654
Created on: Sunday 15th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded. This findspot is known as 'Blaisdon', grid reference and parish protected.


  • Thumbnail image of PUBLIC-129CD0

Record ID: PUBLIC-129CD0
Object type: COIN
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Edward IV Irish penny of Dublin; 'Suns and roses' coinage Spink 6393; J Burns S-2
Created on: Sunday 15th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded. This findspot is known as 'Hartpury', grid reference and parish protected.


  • Thumbnail image of PUBLIC-126466

Record ID: PUBLIC-126466
Object type: COIN
Broad period: MEDIEVAL
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Henry VI halfpenny of London.
Created on: Sunday 15th February 2015
Last updated: Monday 16th February 2015
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 605,192
Search server index: objects

You are viewing records: 1941 - 1960.

Search statistics

  • Total quantity: 950,015
  • Mean quantity: 1.570
  • Maximum: 52,504

Filter your search

1941 - 1960 of 605,192 records.

Other formats: this page is available as rss atom qrcode representations.