Database search results

Back to simple search | Back to advanced search

    You searched for:

    • Idby: 0013EB113F20120D
    • Page: 19

  • Thumbnail image of NLM-6F6425

Record ID: NLM-6F6425
Object type: BUTTON
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Lead alloy button. Cast one piece plano-convex discoid button with an integrally cast and undrilled loop. The front bears a radial moulded design of seven radial lines which cross a circumferential moulded line and terminate on a broad plain rim. Small knops mark the crossing of lines. The U-shaped loop has a very small central aperture; a mould line appears on the button back, along with a figure resembling a straight-limbed letter H aligned at right angles to it. Suggested date: Post-Medieval, 1500-1600. Diameter: 16.2mm, Thickness (clear of loop): 7mm, Height (including loop): 13.…
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded.


  • Thumbnail image of NLM-6F5804

Record ID: NLM-6F5804
Object type: BUTTON
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Lead alloy button. Cast one piece plano-convex discoid button with an integrally cast and undrilled loop. The front bears a radial moulded design of five lines originating from a small central knop, linked by one set of lines at approximate right angles to them, and terminating in a prominent rim. The loop is bent against the back, which displays a mould line. Patinated. Suggested date: Post-Medieval, 1500-1600. Diameter: 18.5mm, Thickness (clear of loop): 4.9mm, Weight: 8.12gms
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded.


  • Thumbnail image of NLM-6F4FBD

Record ID: NLM-6F4FBD
Object type: BUTTON
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Lead alloy and iron button. Cast plano-convex conical button front bearing a moulded design of radial lines and a circumferential line and lower border dividing the surface into rhomboid and triangular compartments, the former occupied by single pellets. The radial lines converge on a pointed knop or nipple. A mass of ferrous corrosion on the back presumably masks a corroded iron loop. This form of button was perhaps homemade, and its decoration reflects that of post-medieval biconvex whorls. The dates suggested for buttons of this form (Read 2005, page 82) are a little later than that…
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded.


  • Thumbnail image of NLM-6F4535

Record ID: NLM-6F4535
Object type: BUTTON
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy button. Cast heart-shaped button front with an integrally cast and drilled U-shaped loop. The display face is thickest at its outer edges, narrowing towards a central longitudinally incised line which ends in a nick in the cleft of the heart. The front is incised around its edge, with a thin line following the edge with a series of short lines crossing it. The canted display faces also bear an incised billeted or laddered border. The entire surface is black, perhaps from treatment with linseed oil in antiquity. Both button and loop are more substantial than usual, perhaps …
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded.


  • Thumbnail image of IOW-6F40DA

Record ID: IOW-6F40DA
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An incomplete post-Medieval copper-alloy button (c. 1600-c. 1700). The shank is missing. This button is sub-oval in plan and flat at the front. The rear face has a down-turned rim. There is an unclear design at the front and the rear face has a circular depression where the shank was attached. This button has a green patina in places. Length: 15.0mm; width: 13.5mm; thickness: 1.4mm. Weight: 1.16g.
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of WAW-6E968A

Record ID: WAW-6E968A
Object type: COIN
Broad period: IRON AGE
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Iron Age: a contemporary copy (silver plated core) of an uninscribed western (Dobunni) silver unit. Similar to Hobbs: Nos. 2976-2980. VA No. 1074. Mack No. 380.
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded.


  • Thumbnail image of IOW-6E89DB

Record ID: IOW-6E89DB
Object type: COIN
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Medieval silver penny of Edward I (1272-1307), minted at Canterbury. Probably class 3g, 1280-1282 (North 1991: 29, ref: 1022). Obverse: EDWR' (crescent) [ANGL] DNS hYB (double barred N); Crowned bust facing with a trifoliate crown and wedged drapery Reverse: CIVI/[TA]S/CAN/TOR; Long cross dividing the inscription with three pellets in each quadrant Diameter: 18.0mm. Weight: 1.07g. DA=12:2. North, J.J. 1991. English Hammered Coinage, Volume II, Edward I to Charles II, 1272-1662. Spink & Son, London.
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of LVPL-6E4061

Record ID: LVPL-6E4061
Object type: TOKEN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A flat lead alloy token of Medieval to Post-Medieval date (c.AD 1200-1800). One face of the object is decorated with a moulded long cross with a single pellet in each angle of the cross. The opposite face depicts a moulded branch or leaf made up of a central straight line and each side of which are five diagonal branches Dimensions: 16mm in diameter, 1mm thick, 2.7g Tokens were easy to make and distributed widely throughout a large period of time; therefore, they are difficult to date precisely. Those decorated to resemble Medieval long cross pennies continued to be circulated throu…
Created on: Friday 19th August 2016
Last updated: Thursday 25th August 2016
Spatial data recorded. This findspot is known as 'Selby area', grid reference and parish protected.


  • Thumbnail image of GLO-6E3CFA

Record ID: GLO-6E3CFA
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Circular copper alloy pedestal type seal matrix. This has a hexagonal handle projecting from the rear of the matrix which is surmounted with a pentagonal loop with a circular hole in the centre. The matrix has an oval face and bares the device of an eagle displayed with its heads facing to the left, this is held within a border of six convex or inward pointing arches that are decorated with a line of pellets that run down their centre. In each of the arches is one or more letters spelling the inscription A-G-V-EL-A IO-HS (AGVELA IHOS) which is a variation in the spelling of the 'Eagl…
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded.


  • Thumbnail image of WAW-6E1FBE

Record ID: WAW-6E1FBE
Object type: FLAKED AXEHEAD
Broad period: NEOLITHIC
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Neolithic (-3500 to -2100) flaked axehead: The axehead has been knapped from a fine-grained dark grey volcanic tuff which weather to a mid grey colour on one face and a mid grey-green on the other face. Broadly the axehead can be classed as a cordate in shape. The axehead has been bifacially flaked to produce an asymmetrical pointed oval section. The upper tip is rounded and this is due to some wear but also more recent abrasion. The surface of the axehead has a patination as described previously, and along the edges there is some recent damage and scaring. The axehead measures 95.11m…
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded.


  • Thumbnail image of ESS-6DE787

Record ID: ESS-6DE787
Object type: DAGGER
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Medieval copper alloy dagger pommel, dating AD1300-1600. The pommel has three arms with trefoils at the end, one of which has broken away. One arm has traces of a rectangular slit with iron inside, staining of which continues beneath the object suggesting that an iron tang once fitted into it. The metal is a mid-dark green colour with orange-brown staining around the iron component. A more complete example is recorded on the PAS database (KENT-1062C7) and a similar example but with four arms has also been recorded (BH-314918). The size would indicate that it was the pomm…
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded.


  • Thumbnail image of LANCUM-6DC91A

Record ID: LANCUM-6DC91A
Object type: SWORD BELT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
A incomplete copper-alloy post-medieval sword belt hangar/mount. The strap fitting consisted of a mount with three suspension loops (one now broken off and missing) from which a trio of hooked plates hang, all of the hooked plates and one loop are detached. One complete hanger and the fragmentary top of the central one survive. The scabbard straps would have been attached to these plates. The mount and the hooked plates feature a symmetrical foliate decoration on the visible faces. These fittings are rarely found complete, however, an illustration of another complete sword-belt fittin…
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded. This findspot is known as 'Holt', grid reference and parish protected.


  • Thumbnail image of LVPL-6DC877

Record ID: LVPL-6DC877
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Trafford
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy object of uncertain function and date. The object consists of a copper alloy loop below which is a worn ancient break. The loop has an internal diameter of 5.5mm. Where the body of the object has broken away the break is 'cross-shaped' with two short rounded projections or 'arms' to either side. The object has a light green patina and is pitted in places. The function and date of this object are currently unknown however the patina and construction of the object suggests that it may be of Roman date. Dimensions: 15mm in length, 15mm in width, 5mm thick, 3.2g
Created on: Friday 19th August 2016
Last updated: Wednesday 24th August 2016
Spatial data recorded. This findspot is known as 'Warburton', grid reference and parish protected.


  • Thumbnail image of LANCUM-6D9569

Record ID: LANCUM-6D9569
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy mount dating from the post-medieval period, c. AD 1550-1750. The object was composed of an openwork quatrefoil with four outwardly projecting lobes with incised decoration. The centre of the mount is the form of a cross with a square centre boss, possibly retaining a central rivet. The front of the mount is slightly domed. The back of the mount is undecorated and has two projecting integral rivets. An exact parallel from the same field was recorded under LANCUM-6D8F53. Similar examples can be seen on the Portable Antiquities Database: SOM-6D3A92, NLM-28C…
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded. This findspot is known as 'Holt', grid reference and parish protected.


  • Thumbnail image of LANCUM-6D8F53

Record ID: LANCUM-6D8F53
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy mount dating from the post-medieval period, c. AD 1550-1750. The object is composed of an openwork quatrefoil with four outwardly projecting lobes with incised decoration. The centre of the mount is in the form of a cross with a square centre boss, possibly retaining a central rivet. The front of the mount is slightly domed. The back of the mount is undecorated and has two projecting integral rivets. Similar examples can be seen on the Portable Antiquities Database: SOM-6D3A92, NLM-28CE3B, DUR-39730D and BERK-0F10A5 NB: The object was not seen by the FLO
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded. This findspot is known as 'Holt', grid reference and parish protected.


  • Thumbnail image of LANCUM-6D51D9

Record ID: LANCUM-6D51D9
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
A complete post-Medieval cast copper-alloy mount (c. 1600-c. 1700). The mount is an elongated sub-triangular shape in plan. It is slightly convex at the front and largely flat at the rear. In plan, it is pointed at one end (possibly a fleur de lys) and has a rounded knop at the opposite end. At the rear there are two now bent tapering integral spikes which are circular in cross-section. The surface is decorated with incised/stamped floral and swirly decoration. This mount is green with a slightly darker green patina. A similar mount has been illustrated by Read 2001: 29, fig. 22,…
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded. This findspot is known as 'Holt', grid reference and parish protected.


  • Thumbnail image of ESS-6D4EC7

Record ID: ESS-6D4EC7
Object type: PERFORATED OBJECT
Broad period: MESOLITHIC
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
An unfinished Mesolithic pebble mace head, dating c. 9,000-4,000 BC. The object is formed from a pebble that has a mid-dark brown colour, with traces of an attempt to drill through the object on either side. The attempted perforation would have been to allow it to be hafted. There are traces of wear around the edges, particularly at the more pointed end. This may indicate that it was still used despite not being hafted. However, it may simply be the result of natural processes, such as deposition in a river. There are traces of dark brown concreted material in lines across the object t…
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded.


  • Thumbnail image of LANCUM-6D404D

Record ID: LANCUM-6D404D
Object type: BUCKLE
Broad period: MODERN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
One half of a post-medieval buckle frame dating from the 18th century. One half of the frame and the central bar survive; the other half and pin are missing. The buckle was made from cast copper alloy. It has an oval frame with indentations at the widest points. These indentations are decorated with a small moulded knop. NB: The object was not seen by the FLO in person. Images and findspot information were kindly provided by the rally organiser.
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded. This findspot is known as 'Holt', grid reference and parish protected.


  • Thumbnail image of LANCUM-6D1FCE

Record ID: LANCUM-6D1FCE
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
One half of an openwork post-medieval buckle frame, dating from c.1660 to c. 1720. The buckle was made from cast copper alloy and it retains a rich silver colour from surface tinning. The buckle is an openwork knee buckle, with a drilled frame for a separate spindle, decorated with floral openwork in three apertures. The frame has concave, bifid sides and a lobed knop over each spindle hole. One half of the buckle, the central spindle, chape and pin are all missing. The buckle is a dark silver colour, with an even surface patina. A similar example is published as #623 in Whitehea…
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded. This findspot is known as 'Holt', grid reference and parish protected.


  • Thumbnail image of ESS-6CE2F5

Record ID: ESS-6CE2F5
Object type: TOY
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Post Medieval lead alloy toy, dating AD1500-1700. All that remains appears to be that of the lower half of a dress or a skirt. Both sides appear decorated with a cast design, consisting of a series of horizontal lines with diagonal lines forming chevrons either side. There is also a border, formed of a ladder style decoration. There are a series of holes in between some of the border designs. These appear to be more a result of the thinness of the lead at those points, rather than intentional perforation. The narrow, upper end appears to have been broken. The metal has a …
Created on: Friday 19th August 2016
Last updated: Friday 19th August 2016
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 691,819
Search server index: asgard

You are viewing records: 361 - 380.

Search statistics

  • Total quantity: 1,072,798
  • Mean quantity: 1.551
  • Maximum: 52,504

Filter your search

361 - 380 of 691,819 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.