Database search results

Back to simple search | Back to advanced search

    You searched for:

    • Ascribed culture: Anglo-Saxon
    • Page: 1

  • Thumbnail image of NLM-548520

Record ID: NLM-548520
Object type: COIN
Broad period: EARLY MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Silver coin fragment. Penny, possibly of an indeterminate Late Saxon ruler, probably issue of 900-1000. Obverse description: possibly a bust; no legend discernible. Reverse description: possibly a small cross pattee. Reverse inscription: [--]OLDWI?N[--] Diameter: 17.3mm, Weight: 0.74gms.
Created on: Thursday 2nd July 2015
Last updated: Friday 3rd July 2015
Spatial data recorded. This findspot is known as 'Alkborough', grid reference and parish protected.


  • Thumbnail image of NLM-A694DD

Record ID: NLM-A694DD
Object type: POT
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Possible pottery fragment. Dark grey reduced fabric, apparently with poorly sorted sand inclusions. A pair of deeply scratched lines on one surface may be adventitious damage. The fabric is possibly an Early Anglo-Saxon one, and the vessel, if such it is, would be hand made. However, the mass is extraordinarily light, and this might rather be a fragment of cinder. This sherd was kindly examined by Wallace Collyer of the North Lincolnshire Pottery Research Group. Suggested date: possibly Early Medieval, 410-700. Weight: 4.32gms.
Created on: Wednesday 24th June 2015
Last updated: Wednesday 24th June 2015
Spatial data recorded. This findspot is known as 'Scotter', grid reference and parish protected.


  • Thumbnail image of IOW-97EEDB

Record ID: IOW-97EEDB
Object type: SWORD
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An incomplete and corroded Early-Medieval (Anglo-Saxon) copper-alloy sword pommel cap of the 'cocked hat' type (c. 400-c 600). The cap is sub-rectangular in plan and pyramidal in form with curved upper faces. It is hollow on the underside. The lugs for rivet holes, loops or other means of attachment are lost due to breaks. There is no hole at the apex. This pommel is corroded with patches of a green patina and the breaks are old. There is no indication of any decoration or surface treatment. Height: 11.7mm; width: 34.9mm; thickness: 13.0mm. Weight: 16.28g. The 'cocked hat' pommel…
Created on: Tuesday 23rd June 2015
Last updated: Tuesday 23rd June 2015
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of LON-5C7792

Record ID: LON-5C7792
Object type: COIN
Broad period: EARLY MEDIEVAL
Workflow stage: Awaiting validation Find awaiting validation
An early-medieval silver sceat of pre-Primary Phase/Transitional Phase Series PaIIb (Pada), dating c 675-80. Ref: Gannon 2013: 97. Dimensions: diameter: 11.57mm; weight: 1.31g.
Created on: Saturday 20th June 2015
Last updated: Wednesday 24th June 2015
No spatial data available.


  • Thumbnail image of NLM-2C7101

Record ID: NLM-2C7101
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy hooked tag. Sheet metal plate of probably originally heart shape, cf. Read Class A Type 6, as kindly identified by the finder. A sheet metal plate with curved sides bears the edges of paired attachment holes at its broader end and the worn stub of a short backward pointing hook at the opposite end. A stamped or incised pattern of converging angled lines may be a cruciform motif. Suggested date: Early Medieval, 750-850. Length: 19.6mm, Width: 13.4mm, Thickness: 0.5mm, Weight: 0.82gms.
Created on: Thursday 18th June 2015
Last updated: Monday 22nd June 2015
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.


  • Thumbnail image of SWYOR-01F1E8

Record ID: SWYOR-01F1E8
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete, copper alloy, small-long brooch of early medieval date, about AD 500 - 600. The remaining portion consists of the bow and the foot; the head, the pin lug and pin have all broken away and are missing with a patinated break. The bow is triangular in section and steps down to a rectangular sectioned foot, which itself steps down to an expanded, flared triangular teminal. The bow is decorated with three short, transverse grooves on the vertical face at the base where it joins the foot. The foot is decorated with three transverse grooves near the bow, and a thicker, broad col…
Created on: Tuesday 16th June 2015
Last updated: Tuesday 30th June 2015
Spatial data recorded.


  • Thumbnail image of IOW-F2802C

Record ID: IOW-F2802C
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Early-Medieval (Anglo-Saxon) copper-alloy buckle pin (c. 460-c. 600). This tapering pin is 'D'-shaped in cross-section, flat on the underside. The upper face has transverse grooves and ridges and the pin-tip is turned down. It has a flat back. On the underside there is a stub of an integral loop. This object, including the break, has a brown patina. Length: 25.8mm; width: 9.0mm; thickness: 5.5mm; thickness including stub: 7.6mm. Weight: 4.55g.
Created on: Monday 15th June 2015
Last updated: Tuesday 16th June 2015
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of IOW-A00352

Record ID: IOW-A00352
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An almost complete Early-Medieval (Anglo-Saxon) copper-alloy polyhedral-headed pin (c. 700-c. 900). This pin has a cuboid head with the corners cut off (faceted). The head has thirteen facets including the top face. Each facet is lozenge-shaped and has been punched (possibly) to form a ring-and-dot motif. The front and back have three ring-and-dot motifs. The top is plain. Beneath the head there is a small collar. The tapering shaft is circular in cross-section and its tip is missing. Just beneath the collar the diameter of the shaft is 1.8mm. This pin has a dark brown patina with ar…
Created on: Thursday 11th June 2015
Last updated: Sunday 14th June 2015
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of IOW-99F121

Record ID: IOW-99F121
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
A complete Early-Medieval (Anglo-Saxon) silver sceat of (c. 710 - c. 740). Series H, Type 49, variety 1c (Abramson 2006, 16 and 54; North 1994, 64, ref. 103, plate 1, no. 48). Obverse: Shield decorated with pellets in annulets; face in circle of pellets as central boss, all within a beaded border Reverse: Crested peacock displaying, right. Rosette below head, all within a beaded border. Diameter: 12.1mm. Weight: 0.95g. DA=12:6. North, J.J. 1994. English Hammered Coinage, Volume I, Early Anglo Saxon to Henry III, c. 600-1272. Spink & Son, London. Abramson, T. 2006. Sceattas an …
Created on: Thursday 11th June 2015
Last updated: Thursday 11th June 2015
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of IOW-97B548

Record ID: IOW-97B548
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
A complete Early-Medieval (Anglo-Saxon) copper-alloy polyhedral-headed pin (c. 700-c. 900). This pin has a cuboid head with the corners cut off (faceted). The head has thirteen facets including the top face. Each facet is lozenge-shaped and has been punched (possibly) to form a ring-and-dot motif. The top is plain. Beneath the head the shaft is circular in cross-section and is 1.5mm in diameter. It tapers from the head to a sharp point. This pin has a dark brown patina and the shaft is bent. At the bend it is coloured green due to corrosion at this point. Length: 56.2mm; width: 6.3m…
Created on: Thursday 11th June 2015
Last updated: Sunday 14th June 2015
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of LEIC-6CC026

Record ID: LEIC-6CC026
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval copper alloy brooch fragment knop, 21mm long, 20mm wide , 4mm thick and weighing 4.28grams. The object is triangular in form and slightly domed in cross section. It shows a stylised face wearing a pointed helm which has a broad band incorporating a nose guard. Above this are two oval motifs which could be interpreted as another face. Below the helm are two raised eyes enclosed by what could be the helms eye loops or possibly stylised cheeks. Below this is an elongated 'chin' from each side of which emerges a stylised bird with hooked beak and prominent eye. The reverse …
Created on: Tuesday 9th June 2015
Last updated: Wednesday 10th June 2015
Spatial data recorded.


  • Thumbnail image of IOW-5ED031

Record ID: IOW-5ED031
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An incomplete and corroded Early-Medieval (Anglo-Saxon) copper-alloy disc brooch (c. 400-c. 600). The plate would have originally been circular in plan. Most of the peripheral edge and the pin are missing. At the front there is a central ring-and-dot motif. This consists of a central pit (the dot) and a ring with two concentric rings further towards the edge. Close to the edge there is a border of ten (possibly eleven) fairly equally spaced ring-and-dot motifs. The rear face is flat except for the remains of a single pin-lug and catch-plate. This brooch is green and corroded overall. A…
Created on: Monday 8th June 2015
Last updated: Tuesday 23rd June 2015
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of IOW-16D9EF

Record ID: IOW-16D9EF
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
IOW2015-2-279A complete Early-Medieval (Anglo-Saxon) Northumbrian copper-alloy styca of Aethelred II (first reign 840-844), possibly minted by Monne. North 1994: 72, ref: 188) Obverse: + (cross pattee) EDLRED REX; Cross pattee Reverse: + (cross pattee) MONN[ ] (possibly), Cross pattee Diameter: 12.0mm. Weight: 1.00g. DA=12:3. North, J.J. 1994. English Hammered Coinage, Volume I, Early Anglo Saxon to Henry III, c. 600-1272. Spink & Son, London.
Created on: Friday 5th June 2015
Last updated: Friday 5th June 2015
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of LIN-D708C6

Record ID: LIN-D708C6
Object type: LINKED PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A gilt copper-alloy head from a triple-pin linked set. The head is flat, circular and has a bulbous headed copper-alloy rivet in the centre. The surface of the head is decorated with an intricate geometric design, apparently the same in each quarter, comprising a network of grooves and ridges. Gilding survives within the grooves. A stub of copper-alloy - coated with patches of iron corrosion - extends from the base, indicating where the pin once was. An iron rivet is located in the surface of the head just above this, and a possible additional iron rivet is along the same alignment but…
Created on: Tuesday 2nd June 2015
Last updated: Monday 22nd June 2015
Spatial data recorded. This findspot is known as 'near Horncastle', grid reference and parish protected.


  • Thumbnail image of IOW-B5BEE9

Record ID: IOW-B5BEE9
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
A complete Early-Medieval (Anglo-Saxon) silver sceat. Series N, Type 41b, 715-720 (Abramson 2006: 40, 83). Obverse: Two figures forward standing on baseline wearing long clocks or tunics, long cross pommée between them and also to left and right. which are being held by the figures. Reverse: Monster left looking back, nose to tail, tail raised, claws beneath and pellets in field. Diameter: 12.0mm. Weight: 0.81g. DA=12:9. Abramson, T. 2006. Sceattas an Illustrated Guide. Heritage Marketing & Publications Ltd. King's Lynn.
Created on: Sunday 31st May 2015
Last updated: Monday 1st June 2015
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of NLM-889C5E

Record ID: NLM-889C5E
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: North East Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch fragment. Cast small long brooch with a flat plate head of indeterminate form, a curved mid bow with lightly billeted keel, a stop above it and a basal step below; and a straight lower bow of which the foot is probably lost. The back bears two stubs next to a rust stain at the pin seat, and the stub of a folded catch plate behind the lower bow. There was possibly stamped decoration along the edges of the lower bow. Abrasion on the mid bow combines with the decorative detail to confer a passing resemblance to the mask of a cat with hollows for eyes and triangular ear…
Created on: Friday 29th May 2015
Last updated: Monday 1st June 2015
Spatial data recorded. This findspot is known as 'Ashby cum Fenby', grid reference and parish protected.


  • Thumbnail image of IOW-701ED8

Record ID: IOW-701ED8
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An incomplete and corroded Early-Medieval (Anglo-Saxon) copper-alloy buckle (c. 450-c. 600). The pin is missing. In plan, the frame is an elongated oval shape and has a narrowed bar. The upper face is convex and the lower face is flat. The bar is circular in cross-section. The frame is corroded and mid-green. Length: 20.1mm; width: 33.0mm; thickness: 6.3mm; maximum diameter of bar: 3.3mm. Weight: 11.10g.
Created on: Thursday 28th May 2015
Last updated: Thursday 28th May 2015
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of IOW-6FC2C8

Record ID: IOW-6FC2C8
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Early-Medieval (Anglo-Saxon) copper-alloy buckle pin (c. 450-c. 600). In plan, the base is trapezoidal in plan and narrows to the incomplete pin shaft. At the front the base is sunken in order to accommodate decorative material, possibly glass or garnet. The base of sunken area is uneven. Between the base and shaft there is a small projection at each side. The pin is triangular in cross-section. On the rear face are the remains of an imbedded iron loop. This pin is corroded and has patches of a green patina. Traces of silvering or tinning can be seen at the front. Leng…
Created on: Thursday 28th May 2015
Last updated: Thursday 28th May 2015
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of IOW-476FD2

Record ID: IOW-476FD2
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
A fragment of an Early-Medieval (Anglo-Saxon) buckle frame (c. 450-c. 600). This fragment is a portion of the end of the frame. It is flat at the front and rear and has two bevels on the outer face. The front and outer face is decorated with numerous oblique grooves. This fragment is tinned or the metal may have a high tin content. The surface, including the breaks, has a shiny brown patina. There are also areas of corrosion. Length: 20.3mm; width: 21.1mm; thickness: 8.1mm. Weight: 14.03g.
Created on: Tuesday 26th May 2015
Last updated: Wednesday 27th May 2015
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of SUR-196655

Record ID: SUR-196655
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Wiltshire
Workflow stage: Published Find published
An early medieval silver cut halfpenny of Aethelred II (978-1016) of last small cross type (North 777; AD1009-1017); mint: York; moneyer: Hidulf. Ref: North 1994: 160.
Created on: Sunday 24th May 2015
Last updated: Wednesday 24th June 2015
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 3,598
Search server index: objects

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 3,788
  • Mean quantity: 1.053
  • Maximum: 29

Filter your search

Reece Period

1 - 20 of 3,598 records.

Other formats: this page is available as rss atom qrcode representations.