Back to simple search | Back to advanced search
You searched for:
Record ID: NLM-90E627
Object type: POLISHER
Broad period: UNKNOWN
County: North Lincolnshire
Workflow stage: Awaiting validation
Cream coloured Fossiliferous Limestone possible polisher, rubber or smoother. Sub-triangular flat stone, smoothed on upper and lower surfaces and along two edges. This object was recovered as a possible miniature axe-head, a function for which the material is unsuitable. However, its flat smoothed form may be the result of either a natural processes - such as erosion in water - or utilisation. It resembles a pumice stone , an item supplied in recent times for cosmetic use to rub off dead skin; pumice stone inserts were also used in pincushions to sharpen points. Such uses may have bee…
Created on: Tuesday 8th May 2012
Last updated: Wednesday 20th January 2021
Spatial data recorded.
Record ID: CAM-3BF965
Object type: BEAD
Broad period: UNKNOWN
Workflow stage: Awaiting validation
A fossil sponge known as Poroshpaera, which are known to have been used in the early Bronze Age as stone beads. Kenneth Oakley's paper, published in an early volume of Antiquity, titled 'The Folklore of Fossils' discusses their use. Identified by Kevin Leahy and confirmed by Mr Paul Ensom, formally of the Natural History Museum. The spherical fossil measures: weight is 2.43g, height (where perforation is vertical) 12.54mm, diameter is 13.51mm and the circular perforation has a diameter of 3.92mm.
It is impossible to tell if a Porosphaera fossil has been used as a bead unless it was …
Created on: Friday 4th May 2012
Last updated: Thursday 15th November 2012
No spatial data available.
Image not taken
Record ID: LIN-278052
Object type: WHETSTONE
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation
A whetstone made of schist or Norweigian ragstone. The surface is very fine and contains high quantities of small refractive ?quartz. The stone is rectangular in plan and in cross-section, broken at one end and with a circular hole drilled through the other. The hole is hour-glass shaped.
Created on: Thursday 3rd May 2012
Last updated: Thursday 3rd May 2012
Spatial data recorded.
This findspot is known as 'near Sleaford', grid reference and parish protected.
Record ID: SOM-A830D0
Object type: WHETSTONE
Broad period: UNKNOWN
County: Somerset
Workflow stage: Awaiting validation
Part of a stone pebble, a micaceous metamorphic rock. It seems to be a natural pebble, oval in section, thickening and widening towards the broken end. The complete end is rounded. It is slightly curved in profile with a concave top and convex base. There appears to be some use polish on the concave top. It is 84.0mm long, 56.7mm wide at the break and 40.4mm thick; it weighs 225 grams.
It is not a local rock but pebbles of many types of rock are found locally in rivers and estuaries brought in by water and glacial action. Whetstones are known to have been used from the Bronze Age o…
Created on: Friday 27th April 2012
Last updated: Friday 27th April 2012
Spatial data recorded.
This findspot is known as 'Cossington', grid reference and parish protected.
Record ID: WMID-6C0B32
Object type: WHETSTONE
Broad period: UNKNOWN
County: Shropshire
Workflow stage: Awaiting validation
An incomplete stone object, possibly a fragement of a whetstone or honeing stone used for sharpening. What remains of the object is wedge shaped, tapering from 15.82 mm wide at its widest end to 9.33 mm wide at the break. The object has been pierced, possibly for suspension, near the widest end, with a hole measuring approximately 3.6 mm in diameter. The object measures 44.11 mm long, 5.48 mm thick and weighs 5.8 grams. Its date is uncertain.
Created on: Tuesday 24th April 2012
Last updated: Wednesday 7th June 2023
Spatial data recorded.
Record ID: CAM-127600
Object type: BEAD
Broad period: UNKNOWN
County: City of Peterborough
Workflow stage: Awaiting validation
A spherical stone, some of the outer surface damaged, with a circular perforation through the centre. The diameter of the perforation is 5.11mm. The bead weighs 3.60g has a height (edge of perforation to edge of perforation) of 15.16mm and width of 16.04mm.
Discussion:
Stones can have naturally occurring cylindrical perforations if the stone has formed around another item such as Belamite fossils. The stone can then be eroded and weathered into pebbles that fortuitously resemble beads and therefore makes identification difficult.
Dr Kevin Leahy identifies this find type as the r…
Created on: Friday 20th April 2012
Last updated: Thursday 15th November 2012
Spatial data recorded.
This findspot is known as 'Glinton Area', grid reference and parish protected.
Record ID: LEIC-7F2742
Object type: WHETSTONE
Broad period: UNKNOWN
County: Nottinghamshire
Workflow stage: Awaiting validation
Three undated stone whetstones, all are incomplete - missing their ends, have a rectangular section and rectangular form and show signs of heavy use.
1 56mm long, 11mm thick and 20mm wide, weight 32.07grams.
2 90mm long, 17mm thick and 33mm wide weight 117grams
3 90mm long, 20mm thick and 27mm wide, weight 99.3grams.
Created on: Friday 13th April 2012
Last updated: Friday 13th April 2012
Spatial data recorded.
Record ID: CPAT-1D6951
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Powys
Workflow stage: Awaiting validation
A grey, stone spindle-whorl decorated with incised lines radiating from the central hole (for the wooden spindle). It's condition is worn and one or 2 pieces have flaked away from the surface. Its overall diameter is 46mm, and the central hole is 10mm. Difficult to date, spindle-whorls having been used from prehistory up into the post-medieval period.
Created on: Tuesday 27th March 2012
Last updated: Thursday 10th January 2013
Spatial data recorded.
Record ID: CAM-C4EBB3
Object type: BEAD
Broad period: UNKNOWN
County: City of Peterborough
Workflow stage: Awaiting validation
An oval shaped stone with a flattened base, that has a roughly circular perforation through the centre. The perforation is set at 90 degrees from the flattened base and has a diameter of 4.68mm. The stone weighs 3.68g, has an oval diameter of 17.63mm x 14.46mm and height of 13.94mm.
Discussion:
Stones can have naturally occurring cylindrical perforations if the stone has formed around another item such as Belamite fossils. The stone can then be eroded and weathered into pebbles that fortuitously resemble beads and therefore makes identification difficult.
Dr Kevin Leahy identifi…
Created on: Friday 23rd March 2012
Last updated: Thursday 15th November 2012
Spatial data recorded.
This findspot is known as 'Etton Area', grid reference and parish protected.
Record ID: LVPL-0E2D27
Object type: WEIGHT
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation
Possible unfinished hanging weight of uncertain date. The object is sub-oval in plan and oval in cross-section. One side of the object has a deep circular depression measuring 9.06mm in diameter. The object is toffee brown in colour.
Created on: Friday 2nd March 2012
Last updated: Wednesday 7th March 2012
Spatial data recorded.
This findspot is known as 'Washingborough', grid reference and parish protected.
Record ID: LEIC-C38FC1
Object type: CARVED STONE
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
A small stone that has been carved, possibly into a phallic form? The stone, which appears to be a hard pale brown sandstone, has flattened lower and rear faces and an arched upper face. The stone tapers from the rear to a rounded front end. The centre of the stone has been carved with three encircling shallow grooves. The object is 25mm long, 24mm wide, 15mm thick and weighs12.67g.
Created on: Friday 3rd February 2012
Last updated: Friday 26th June 2020
Spatial data recorded.
Record ID: SUSS-56F2A4
Object type: BEAD
Broad period: UNKNOWN
County: West Sussex
Workflow stage: Awaiting validation
A very worn and incomplete sub-spherical object made of stone, probably a sandstone bead, of uncertain date. The object is asymmetrically-shaped and sub-spherical in plan, with a sub-oval cross-section. It has a cylindrical hole drilled through the centre and a series of haphazardly placed incised dashes throughout the external surface, which could be purposeful but may be a result of natural faults or post-depositional damage. The underside is either damaged or purposefully flattened to a degree. It measures 17.9 mm diameter, 14.4 mm in height and weighs 4.56 grams.
If the obje…
Created on: Tuesday 17th January 2012
Last updated: Wednesday 15th February 2012
Spatial data recorded.
This findspot is known as 'Near Chichester', grid reference and parish protected.
Record ID: SWYOR-EC7F82
Object type: GEOLOGICAL SAMPLE
Broad period: UNKNOWN
County: Doncaster
Workflow stage: Awaiting validation
A piece of stone which was recovered because it was not the usually occurring geology in this area. It may be a naturally occurring nodule of iron rich stone (though it does not react to a magnet). It has a dense structure and is dark brown with a red tint. Parts of the surface are black and shiny with a crystalline structure, but it is not sooted. Other areas are pimply, and other areas have traces of sandstone on the surface. It has not been possible to identify the nature of this material, but it is probably an iron rich naturally occurring stone. It does not appear to be waste mat…
Created on: Thursday 12th January 2012
Last updated: Wednesday 27th May 2020
Spatial data recorded.
Record ID: SWYOR-EB38D4
Object type: MORTAR (VESSEL)
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation
A carved stone bowl, possibly a mortar used for grinding food, of uncertain date. The stone is irregularly shaped; sub D shaped in plan, and the bowl is circular.
Mortars or "creeing troughs" would have been used with a pestle for removing the husks from grain before cooking. Post Medieval examples often have distinctive shapes such as WILT-84FE96. Some examples can be seen in situ in the kitchens of historic houses. In the Yorkshire Pennines, such mortars were frequently highly decorated and individualised. An example is SWYOR-052CE2. Plain examples like the one recorded here ar…
Created on: Thursday 12th January 2012
Last updated: Wednesday 27th May 2020
Spatial data recorded.
Image not taken
Record ID: SF-DA0025
Object type: QUERN
Broad period: UNKNOWN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of grey lava quern stone, preserving approximately 25% of the original diameter. Part of one edge is perserved with flattened, curved outer surface and flat top and bottom surfaces. The base(?) of the quern is flat and with no decoration or evidence of a grinding surface. The top(?) has a flattened rim, the remainder being worn and slightly concave towards the now missing centre of the object, probably as a result of use-wear. The stone itself is grey, relatively hard and compact with some large quartz inclusions. It measures 27.6mm in length, 128.01mm in width, 55.48mm in …
Created on: Wednesday 11th January 2012
Last updated: Wednesday 11th January 2012
Spatial data recorded.
This findspot is known as 'Kedington', grid reference and parish protected.
Records per page: 10 20 40 100
Sort your search by:
Which direction?
Total results available: 15
Search server index: valhalla
You are viewing records: 1 - 15.
1 - 15 of 15 records.