Record ID: DENO-851F37
Object type: SCABBARD
Broad period: EARLY MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
An incomplete, later Early Medieval cast copper-alloy fitting or mount, probably a knife scabbard chape, dating to the late 10th or 11th century. The fitting is of an irregular openwork shape in plan and mostly flat in section but slightly hollowed on the reverse. One end of the item is folded over to form the bottom edge of the chape and although this fold has a smooth edge the item has almost certainly been broken at this point. Comparisons to similar mounts indicate that in its present state just over 50% of the original mount has survived. When complete the item would have continu…
Created on: Thursday 8th December 2005
Last updated: Wednesday 19th October 2016
Spatial data recorded. This findspot is known as 'Gringley on the Hill', grid reference and parish protected.

Record ID: LIN-8525B4
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Bone handle (possibly from a knife) probably dating to 17th century. The handle has a curved surface and rounded end with one rivet hole along its surviving length. Next to the rivet hole is a smaller hole surrounded by copper alloy corrosion, presumably the remains of a small copper alloy tack. The inside of the handle is flat and would have been attached onto the blade (or tang) with a matching bone handle on the other side
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NLM-84F9C6
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation
Large scraper, some retouches of left cutting edge. Dimensions: height 79.7g, width 30.2mm, thickness 12.5mm, weight 29.47g.
Created on: Thursday 8th December 2005
Last updated: Friday 25th May 2018
No spatial data available.

Record ID: ESS-8512D3
Object type: BROOCH
Broad period: IRON AGE
County: Essex
Workflow stage: Awaiting validation
Incomplete copper alloy ‘Wessex type La Tène I’, one piece Iron Age brooch. The head of the brooch is now missing, but would once have comprised of an integral four-coil springhead that would have then extended into the pin shaft. All that remains is the bow of the brooch, which is distinctively arched with a squared C shape profile. It is domed in section, having a slightly flatter reverse, and tapers to either end. A downward turned knop at one end is all that remains of the foot, now heavily worn, but with a tiny fragment of the upper catchplate attached. Hattatt, 1985, Iron Ag…
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Abbess Roding', grid reference and parish protected.

Record ID: DENO-850F14
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy double loop buckle, c.1350-1650. Bevelled edges on obverse, flat on reverse. Iron corrosion at the side of one loop, presumably from the pin. Length 23.78mm, width 19.42mm, thickness 2.18mm, weight 3.19g.
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wickenby', grid reference and parish protected.

Record ID: LIN-8512A5
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy buckle plate. The plate is trapezoidal and has four rivet holes, two of which at the attachment end contain bulbous headed rivets. The two arms at the other end are broken. The surface is gilded and has an incised border.
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: SOMDOR-850C37
Object type: COIN
Broad period: IRON AGE
County: Dorset
Workflow stage: Awaiting validation
A South-Western Uninscribed ('Durotrigian') stater, of late Iron Age date. This may be an example of a Pale Gold and Silver stater, made from an alloy of gold, silver and copper. This is supported by the weight of the coin, which is comparable to the Pale Gold and Silver staters from the Corfe Common Hoard (Hobbs 1996, p. 153).
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Bincombe area', grid reference and parish protected.

Record ID: DENO-84F613
Object type: SPINDLE WHORL
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Cast lead alloy spindle whorl fragment, roughly one half survives. This appears to have been mis-cast, as the 'broken' edges are uneven, with one void, and one area where the molten metal was bent over. One side is decorated with diagonal lines and pellets, the other with a sun motif (ring with numerous points on outside edge). Length 28.26mm, width 13.62mm, thickness 11.22mm, weight 20.32g.
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wickenby', grid reference and parish protected.

Record ID: LIN-850245
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy knife stop. The stop is in the form of an abstract dogs head with a flat snout. The flat snout is decorated with a longitudinal groove and five square recessed around it. The snout has a recessed collar. Part of the iron tang survives at the knife end.
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: WAW-84F948
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A penny of Charles I.
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: BH-84EF36
Object type: JETTON
Broad period: MEDIEVAL
County: Hertfordshire
Workflow stage: Awaiting validation
A copper-alloy jetton of Low Countries origin. The object is heavily worn and corroded, particularly on the obverse, but is probably a jetton of the 'Rampant lion on shield' series of Louis de Male (1346 - 1384 AD). The object measures 25.4mm diameter by 0.7mm thick and weighs 2.20g.
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Hitchin', grid reference and parish protected.

Record ID: LIN-84F392
Object type: CLASP
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published
Cast copper alloy single loop clasp with moulded crowned head and shoulders. The head is cast in high relief and the eyes, nose and mouth are clearly defined. The frame is trapezoidal and the shoulders of the king (i.e the upper corners) are decorated with a series of transverse groove.
Created on: Thursday 8th December 2005
Last updated: Tuesday 9th July 2019
Spatial data recorded.

• 

  Image not taken

Record ID: LVPL-84F5A8
Object type: COIN
Broad period: POST MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Awaiting validation
Elizabeth I half groat, clipped.
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: WMAS-84EB67
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Published
Cast copper alloy seal matrix, 13th to 14th century. The seal has a pointed oval shape 'vessica' form. On the reverse is a median raised rib, approximately 2.7mm wide, down the length . Near the top of the rib is a lug with a single piercing. The die of the seal has been engraved. The central motif is 21.9mm long by 10.9mm wide. Its upper section contains two figures the larger of the two and is wearing a three pointed crown and is looking outwards. According to David Symons (Birmingham Museum and Art Gallery), the figure is the Virgin Mary, the Crown signifying her as ‘…
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NLM-84E996
Object type: BEAD
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation
Ae bead, biconical, possibly bead from a torque, but regular. Dimensions: thickness 6.5mm, diameter 12.6mm, weight 3.17g.
Created on: Thursday 8th December 2005
Last updated: Friday 25th May 2018
No spatial data available.

Record ID: DENO-84D5F3
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Published
Cast copper alloy knob from a 'Florid' cruciform brooch with, a stylised human face at centre, and eagles' heads on either side and plain rectangular strip above. There is a projecting pierced flange (width 5,2mm, length c.4.5mm) towards top of the reverse of the knob, then some iron corrosion below , including what appears to be iron pin going through the hole above, then copper alloy rivet to either side (visible on the obverse, just below each eye) securing the remains of a rectangular iron(?) sheet strip which would have covered and held the iron pin. Early Medieval. Length 14.70mm…
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wickenby', grid reference and parish protected.

Record ID: LIN-84E2B1
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published
Copper alloy shield shaped plate mount with a rectangular bar mount at the attachment end. There are two circular broken rivet on the reverse.
Created on: Thursday 8th December 2005
Last updated: Wednesday 13th November 2019
Spatial data recorded.

Record ID: LVPL-84DBC4
Object type: COIN
Broad period: MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Awaiting validation
Edward III half groat, clipped.
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: SUR-84DB92
Object type: COIN
Broad period: MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A farthing of Edward I-II (Type 28-31)
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: DENO-84C3E7
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy hooked tag, 16th century. Trapezoidal loop, then lozenge shaped openwork plate, with a lis at the centre. The complete hook is slighty bent over at the tip. Bent across the base of the plate. Length (bent) 31mm, width 20.56mm, thickness (across centre of plate) 1.98mm, weight 2.79g.
Created on: Thursday 8th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wickenby', grid reference and parish protected.