Record ID: DENO-7D4565
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Published
Early medieval coin. Hammered silver cut halfpenny of Edward the Confessor, small flan type, 1048-1050 (North no. 818). One corner missing. Length (not diameter) 13.54mm, width 7.42mm, weight 0.36g. EMC 2006.0017
Created on: Tuesday 20th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Sleaford', grid reference and parish protected.

Record ID: NLM-7D22C5
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete cast copper-alloy Anglo-Saxon sleeve clasp. The hook-piece and probably belongs to Hines B18c. The sub-rectangular bar has a row of conjoined knobs along the rear edge with an attachment hole in between each knob. The bar is divded into rectangular panels divded by a worn transverse rib under each attachment hole. The clasp has broken off just after the integral rectangular hook. The surviving length is 24.0mm, the width is 12.2mm and the weight is 2.36g.
Created on: Tuesday 20th December 2005
Last updated: Wednesday 20th February 2019
No spatial data available.

Record ID: BH-7CF1D3
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Awaiting validation
A copper-alloy Radiate, possibly of Aurelian, or of the post-Aurelian coin reform period. The coin surfaces are worn, corroded, and scratched. It measures 21.1mm diameter by 1.5mm thick and weighs 3.22g.
Created on: Tuesday 20th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Baldock', grid reference and parish protected.

Record ID: BH-7CAB77
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hertfordshire
Workflow stage: Awaiting validation
A copper-alloy belt or harness mount of probable 17th century AD date (B.Read, 2001, p.35-37). The plate is symmetrical and has a small lobe at the (?)top (untrimmed on one side), above a second larger lobe and, below this, a trapezoidal section. The bottom section consists of a small three-lobed projection. On the reverse are two integral rivets, located one at each end, and bent outwards. The surface of the plate has a corroded tin layer. The object itself is bent at the middle. It measures 23.3mm long by 8.7mm wide and 1.7mm thick (plate). The weight is 2.03g.
Created on: Tuesday 20th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Baldock', grid reference and parish protected.

Record ID: NLM-7CDC53
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete cast lead alloy post-medieval button. The solid discoidal head is convex at the front and flat at the back. The front is decorated with six concentric squares around a central square knob. The integral shank is incomplete. The diameter is 20.3mm and the weight is 1.22g.
Created on: Tuesday 20th December 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-7CD5D4
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete cast lead alloy post-medieval button. The solid discoidal head is slightly convex at the front and flat at the back. The front is decorated with an openwork eight-spoked wheel. The integral shank on the back is incomplete. The diameter is 27.2mm and the weight is 16.87g.
Created on: Tuesday 20th December 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-7CC275
Object type: STUD
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
A complete cast copper-alloy Roman stud. The hollow square mount has a central vertical shallow groove. The integral circular sectioned shank has an incomplete flat square rove on the end. The length is 21.5mm, the width is 20.8mm and the weight is 6.93g.
Created on: Tuesday 20th December 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-7CAFB6
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A foot fragment from a cast copper-alloy small-long brooch. The expanding foot terminates with a thick moulding with vertical grooves. The surviving length 11.5mm, the maximum width is 8.9mm and 1.07g.
Created on: Tuesday 20th December 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: BH-7C7BA4
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Hertfordshire
Workflow stage: Awaiting validation
A Post Medieval lead cloth seal seal of the Norwich Weavers’ Company dated 1679. The object consists of two sub-circular discs joined by a connecting strip. One of the discs has the letters ‘NO / RWI / CH’. The other disc reads ‘A B / F C R D / S R G P / B G. ‘. The seal measures 18.9mm diameter by 2.9mm thick and weighs 6.64g. Paul Cannon, who kindly identified the seal, states that :‘this is one of a series of Norwich cloth seals which contain the surname initials of the twelve wardens who were responsible for supervising the standard o…
Created on: Tuesday 20th December 2005
Last updated: Tuesday 8th November 2022
Spatial data recorded. This findspot is known as 'Baldock', grid reference and parish protected.

Record ID: CORN-753832
Object type: BELL
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
Cast copper alloy crotal bell with no decoration. There is a central raised rib which divides the upper and lower halves of the bell. On the upper half of the bell, there are four circular sound holes, each about 5 mm in diameter, two on either side of the attachment platform for the suspension loop, which is missing. On the lower half of the bell, there is a slit which runs perpendicular to the central rib, along the circumference of the bell, almost until it meets the rib on both sides. The metal ball clapper remains within the bell. Bailey (1992) has a similar but much larger exam…
Created on: Tuesday 20th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: CORN-74A302
Object type: COIN
Broad period: MEDIEVAL
County: Cornwall
Workflow stage: Published
Silver penny of Edward II (1307-1327), Class 11a (1310-1312), London mint. [Ed.11a]
Created on: Tuesday 20th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: CORN-7109C3
Object type: COIN
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
Silver shilling of Charles I (1625-1649), Group D, c.1635-6
Created on: Monday 19th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: DENO-70F003
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval coin. Hammered silver cut short cross halfpenny, 1180-1247, London mint. Segment missing. Diameter 18.52mm, width 8.92mm, weight 0.51g.
Created on: Monday 19th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Sleaford', grid reference and parish protected.

Record ID: DENO-70E224
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval coin. Hammered silver farthing of Edward I, London mint, North class IIIc, 1280-1. Diameter 11.30mm, weight 0.35g.
Created on: Monday 19th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Sleaford', grid reference and parish protected.

Record ID: DENO-70D632
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval coin. Hammered silver farthing of Edward I or II, 1300-1314, London mint, Withers Type 28/29/30. Diameter 13.14mm, weight 0.31g.
Created on: Monday 19th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Kirkby la Thorpe', grid reference and parish protected.

Record ID: CORN-70C6A5
Object type: COIN
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
Silver threepence of Elizabeth I (1558-1603), North: Second Issue (c.1561-1582), Spink: 4th Issue (c.1578-82), c.1580-81
Created on: Monday 19th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: DENO-70CB21
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval coin. Hammered silver penny of Edward IV, Richard III or Henry VII. Clipped, obverse worn smooth, pierced. Diameter 15.04mm, weight 0.64g.
Created on: Monday 19th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Sleaford', grid reference and parish protected.

Record ID: DENO-70BCD2
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval coin. Hammered silver long cross halfpenny, London mint, 1280-1526. Poor condition. Cracked. Diameter 15.34mm, weight 0.54g.
Created on: Monday 19th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Kirkby la Thorpe', grid reference and parish protected.

Record ID: DENO-70ABF1
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval coin. Hammered silver halfpenny of Edward I, London mint, 1280-1282. Withers Type 2a. Diameter 14.8mm, weight 0.64g.
Created on: Monday 19th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Kirkby la Thorpe', grid reference and parish protected.

Record ID: CORN-70A791
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
Cast copper alloy asymmetrical, single-loop, sub-rectangular buckle with concave sides and moulded outer edge. The front of the edge is rounded with a single lobed knop in the centre. The knop is defined by two moulded lines which form a V pointing to the inside edge of the frame. The strap bar is recessed and narrowed. The frame is convex in section with a bevelled base that arches and rises towards the inner edge of the frame. The buckle frame is 39.4 mm long and 34.5 mm wide and 4 mm in thickness. The bar is 35 mm long and 2.3 mm wide and 3.7 mm in thickness. Whitehead (1996) illu…
Created on: Monday 19th December 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.