Record ID: LVPL-BD6A58
Object type: PUNCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
Possible Roman iron punch, gouge end damaged, domed head diameter 11mm. Manning describes two examples of these in Manning, W.H., 1985, Catalogue of the Romano-British Iron Tools, Fittings and Weapons in the British Museum, Nos E32 & E34.
Created on: Wednesday 5th January 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LON-5171A3
Object type: TOOLS AND EQUIPMENT
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
Iron folk dating to the early post medieval period (Circa 1700 - 1750). The folk has a pistol shaped woooden handle held onto the iron folk by three iron rivits. The iron folk is flat tanged with two points.
Created on: Wednesday 12th January 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Rotherhithe', grid reference and parish protected.

Record ID: LANCUM-BB00D3
Object type: AXEHEAD
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Published
Slim late medieval iron woodmen's axe. The axe weighs more than 300gr and it is 170mm long and has a relatively short blade of 62mm length. At its thickest point near the shaft hole is it 200mm thick, but it narrows down to the cutting edge which is in its corroded state ca. 2mm thick. The straight wooden shaft would have been inserted and fitten through an almost triangular hole of 28 by 20mm at the rear end of the axe, at a right angle to the axehead itself.
Created on: Monday 17th January 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Kington St Michael', grid reference and parish protected.

Record ID: WMID-BD26B4
Object type: BUCKLE
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A group of three iron buckles (collective weight: 44.04g), all in an incomplete and corroded condition, all probably dating from the 15th-18th century.
Created on: Monday 17th January 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LON-922A23
Object type: BLADE
Broad period: MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
Whittle tanged iron double edged blade of knife dating possible to the medieval period. The blade in 69mm in length and tapers to a point, before the shaft there is a ridge, the shaft also tapers to a point, this would have been fitted into a wooden handle.
Created on: Thursday 27th January 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Queenhithe', grid reference and parish protected.

Record ID: LON-A20C30
Object type: FOLDING KNIFE
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
A complete Post Medieval folding knife. The blade of the knife is made from wrought iron and is bellied in shape. A Marker's mark 'ZEALOT' is stamped on one face of the blade. The edge of the blade has worn away in places creating an overtly jagged edge. Where the blade connects to the handle there is an iron shoulder. Diagonal straight groves run along the bone handle with three iron rivets. The end of the handle is hooked with a single circular hole running through it.
Created on: Friday 28th January 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Customs House', grid reference and parish protected.

Record ID: LON-A22E35
Object type: PADLOCK
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
A Post Medieval iron padlock probably dating 17th -18th century.
Created on: Friday 28th January 2005
Last updated: Tuesday 17th February 2015
Spatial data recorded. This findspot is known as 'Customs House', grid reference and parish protected.

Record ID: LON-A237D3
Object type: JEWS HARP
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Published
Iron Jews harp dating to the Post Medieval Period. The central curved section has the rebate into which the tongue was attached. Some corrosion has occurred on this example.
Created on: Friday 28th January 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Customs House', grid reference and parish protected.

Record ID: BERK-23A863
Object type: AXE
Broad period: EARLY MEDIEVAL
County: Northamptonshire
Workflow stage: Published
A Medieval iron axe head (10th - 13th century). The width of the axe head expands from the butt (width: 50.19mm) to the curved cutting edge (width: 88.57mm). The upper edge is straight but the lower edge curves downwards. In the centre on one side a makers mark has been stamped. The mark is a cross where the length is twice the width of the arms. It is arranged so that the long arm of the cross is aligned along the length of the axe head. The axe head is broken across the vertical perforation for attachment on the butt, ?broken in antiquity. It is similar to woodworking axes (10t…
Created on: Thursday 3rd February 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Farthinghoe', grid reference and parish protected.

Record ID: LON-3B0E57
Object type: KNIFE
Broad period: MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
A Scale Tanged iron knife with wooden handle dating to the medieval period (Circa 1500 - 1600 AD). The knife handle is oval in section and has four iron rivits holding the wood to the iron shaft. There is an iron cap at the top of the handle which is in the form of three toothed shape. The blade is bellied and narrows gradually to the tip, it is 94mm in length (Hayward 1957: 4).
Created on: Friday 4th February 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LON-3B2587
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
Scale tang iron knife with bone handle dating to the early post medieval period. A fully perforated bone handle with delicatly incised foliate decoration, the handle is circular in section (Crummy 1988. 75). There is a ridge at the top of the handle. There are four rivits remaining in the handle. The blade and shoulder of the knife are as one. The blade is bellied shaped, and tapers to a point, it is 85mm in length (Hayward 1957: 4).
Created on: Friday 4th February 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LON-4F18C2
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
Whittle tang iron knife, dating to the medieval period. The knife has an wooden handle which is circular in section and undecorated, the top of knife handle has two grooves. The terminous of the handle is shaped. The blade is bellied and measures 134 mm in length. There is a cutlers mark which is illlegible.
Created on: Saturday 5th February 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LON-4F2681
Object type: KNIFE
Broad period: MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
Scale tang iron knife with bone handle dating to the later medieval period (16th century). The handle is circular in section and is made up of layers of bone seperated by copper alloy washers (Hayward 1957: 6). The top of the handle is iron cap. The blade is bellied in shape, with broad shoulders tapering to a point and measures 69mm in length (Hayward 1957: 4). The shoulder plate is made of copper alloy, there is a cutlers mark on the blade although this is illegible.
Created on: Saturday 5th February 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LON-4F3365
Object type: KNIFE
Broad period: MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
Scale tanged iron knife with wooden handle, dating to the later medieval period (Circa 1500 AD - 1600 AD). The wooden handle is joined to the iron shaft by four iron rivits, the wood is decorated with cross hatching which are craved into it. At the end of the handle there is a cap made of iron which is curved to one side. The blade is bellied shape, with broad shoulders and tapers to a point, it is 87mm in length.
Created on: Saturday 5th February 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LON-4F45E7
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
Scale tang iron knife with bone handle dating to the later medieval period. The handle is carved with pilgrims either side, two standing figures. The end of the handle is copper alloy. There are two rivits holding the handle in place, the handle flares at the end 14mm and tapers towards blade 7mm. The blade of the knife is bellied and tapers to a point, there is a cutlers mark [x] near the shoulder plate which is copper alloy.
Created on: Saturday 5th February 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LON-4F5A02
Object type: KNIFE
Broad period: MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
Scale tang iron knife with a bone handle, dating to the late medieval/ post medieval period. The blade is bellied form, and measure 59mm in length; Towards to tip there is a prononced taper. The blade has a shoulder plate which is iron and one piece with the blade. The handle is attached to the iron tang by five iron rivits. The rounded handle has a copper alloy sheet on the edge of the end. The mint mark on the blade is illegible.
Created on: Saturday 5th February 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LON-4F6922
Object type: KNIFE
Broad period: MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
Whittle tang iron knife, with a bone handle dating to the later medieval period. The knife has a square in section bone handle with a copper alloy rounded knop. The blade of the knife is bellied form. The blade and bolster of the knife are one piece, and the bolster is plain.
Created on: Saturday 5th February 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LON-4F7B75
Object type: KNIFE
Broad period: MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
whittle tang iron knife with bone handle dating to the later medieval period. The blade is narrow and bellied and measures 81mm in lenght. The blade joins to the handle by a copper alloy shoulder plate. The bone handle is circular in section and has a copper alloy cap which is decorated with pilgrims either side.
Created on: Saturday 5th February 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LON-4F92C3
Object type: KNIFE
Broad period: MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
Scale tang iron knife, dating to the medieval period. The knife has an integially copper alloy handle which retangular in section and has a rounded knop at the top, which is decorated with linear cable design grooves.
Created on: Saturday 5th February 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LON-4F9F30
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
Scale tang iron knife with bolster and copper alloy handle, dating to the post medieval period. The knife handle is cast and is decorated with floral design, there is a rounded knop on the end. The blade is 106mm in length. The blade is bellied and there is a cutlers mark stamped on one side which is know illegible. It can be compared directly to an example found in Amsterdam (Baart 1977, 333; no. 636). Referred to by Papin and Soulat (2017, 6; note 32).
Created on: Saturday 5th February 2005
Last updated: Tuesday 17th October 2017
No spatial data available.