Record ID: NLM-C719F6
Object type: BROOCH
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation
An incomplete cast copper-alloy Roman dragonesque brooch. The s-shaped plate is slightly twisted at the head and foot. In the centre and widest part of the plate is an oval convex cell with a knob at the pointed ends which may have once contained a stone or gem. The symmetrical design on either side of the central cell is quite worn, However a triangular cell with blue enamel is visible on one side with some traces of smaller red enamel circles around it. The foot and head are decorated with the same design, but again this is quite worn. Both have a ring and dot pattern with a blue ena…
Created on: Thursday 17th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Cottam', grid reference and parish protected.

Record ID: NLM-C70F81
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A complete cast copper-alloy medieval seal matrix. The flat pointed-oval matrix has a device of a lion passant in the centre. Around the edge is the legend S’GIL GERTI: KOLAND. The legend begins with a short cross and ends with a fleur-de-lis. The reverse of the matrix has an integral loop with a circular perforation. The length is 31.34mm, the width is 20.7mm, and the weight is 9.26g.
Created on: Thursday 17th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Cottam', grid reference and parish protected.

Record ID: NLM-C6EDE2
Object type: COSMETIC PESTLE
Broad period: IRON AGE
County: Nottinghamshire
Workflow stage: Awaiting validation
A complete cast copper-alloy Roman cosmetic end-looped pestle. The plain loop-end of the pestle is sub-circular in section. The stem is D-shaped in section with a curved facet on the convex edge of the tip. The original dark green patina has worn off around the tip and on the top of the stem and loop. The length of the pestle is 60.7mm, the external diameter of the loop is 12.6mm, the maximum width of the stem is 9.1mm and the weight is 15.82g.
Created on: Thursday 17th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Cottam', grid reference and parish protected.

Record ID: NLM-A69BB4
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A cast incomplete Silver gilt dress-hook. The openwork plate has foliate and pierced scrolled ornament supporting the trapezoidal shaped strap loop. The fastening hook on the reverse is missing but solder marks show its original position. The surviving length is 20.0mm, the width is 17.1mm and the weight is 2.85g.
Created on: Monday 10th October 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Dunham on Trent', grid reference and parish protected.

Record ID: NLM-FCD706
Object type: COIN
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Published
A pierced silver Venetian soldino of Doge Leonardo Loredan, 1501-1521 [ven]
Created on: Tuesday 20th September 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: NLM-644480
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A cast solid silver post-medieval button. The button is circular in plan. The face has a punched ground and is stamped with two hearts conjoined beneath a crown. The reverse has a fastening loop. The diameter is 13.0mm and the weight is 0.66g. For a similar button, see Treasure Annual Report, 2001, # 153, p. 81
Created on: Tuesday 26th July 2005
Last updated: Wednesday 4th May 2022
Spatial data recorded. This findspot is known as 'Dunham on Trent', grid reference and parish protected.

Record ID: NLM-CBF656
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation
An incomplete silver-plated imitation radiate of Gordian III, c. 238-244 AD
Created on: Tuesday 19th July 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Gainsborough', grid reference and parish protected.

Record ID: NLM-C5DDA7
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A worn double-sided lead seal matrix. The matrix has a motif and legend on both faces, but both are difficult to read. One face of the seal has a crescent with a star below it. The legend reads R'ROB[]ANON. The first name is Robert and the second name is probably a surname. The central device of the reverse face is possibly a stylised flower with a pair of leaves. The legend reads []TORI[]DHG . It is likely that the TORI is part of PASTORIS which means shepherd, or perhaps more likely PISTORIS which means baker.The length is 26.7mm, the width is 22.7mm and the weight is 10.38g.
Created on: Thursday 19th May 2005
Last updated: Sunday 26th January 2020
No spatial data available.

Record ID: NLM-C5C544
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A worn cast lead seal matrix. The flat pointed oval matrix has a stylised fleur-de-lis as the central device. The legend around the edge starts in the middle of the curved side. It reads SI[........]G[...]LLI[........]GER. The last name is likely to be Roger, but the rest of the legend is illegible from the few remaining letters. The reverse of the matrix is flat and has no attachment loop. The length is 34.9mm, the width is 23.1mm and the weight is 17.68g.
Created on: Thursday 19th May 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-C5BCB5
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A worn and slightly misshapen lead seal matrix. The flat pointed oval matrix has a fleur-de-lis motif in the centre. The legend around the edge is incomplete but reads +S [....] ROGER [....] FIL' ROBT [....] . The back of the matrix has the remains of an integral lug that is now squashed flat into the matrix. The surviving length is 33.1mm, the width is 20.7mm and the weight is 29.48g.
Created on: Thursday 19th May 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-B4F847
Object type: BELL
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A complete cast copper alloy spherical crotal bell. The undecorated bell has a long integral rectangular lug on the top with rectangular perforation. The top half of the bell has two circular perforations. The bottom half has a rectangular slit with a circle at each end. Inside the bell, the copper alloy ball still remains. The length of the bell is 35.5mm and the diameter is 27.3mm and the weight is 21.77g.
Created on: Wednesday 18th May 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-B4F2A4
Object type: BELL
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A complete cast copper alloy spherical crotal bell. The bell has an integral rectangular lug on the top with semicircular perforation. The top half of the bell is undecorated and has two circular perforations. The bottom half is decorated with sunburst decoration and has a rectangular slit with a circle at each end. On one side of the slit is a semicircle with a chevron with an inverted triangle above it. Inside the bell and around the slit is iron corrosion, which suggests the bell had an iron ball. The length of the bell is 39.0mm and the diameter is 32.0mm and the weight is 37.22g.
Created on: Wednesday 18th May 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-B4E3A7
Object type: BELL
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A complete cast copper alloy spherical crotal bell. The bell has an integral rectangular lug on the top with semicircular perforation. The top half of the bell has two circular perforations. It has traces of sunburst decoration around the lug, most of the top half is plain. The bottom half has a rectangular slit with a circle at each end. It is also decorated with sunburst decoration, but most has worn off. Inside the bell, the copper alloy ball still remains. The length of the bell is 35.5mm and the diameter is 27.2mm and the weight is 23.61g.
Created on: Wednesday 18th May 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-B4DCA5
Object type: BELL
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A complete cast copper alloy spherical crotal bell. The undecorated bell has an integral rectangular lug on the top with square perforation. The top half of the bell has two circular perforations. The bottom half has a rectangular slit with a circle at each end. The bell is torn near the end of the rectangular slit. Inside the bell, the copper alloy ball still remains. The length of the bell is 34.3mm and the diameter is 26.4mm and the weight is 17.72g.
Created on: Wednesday 18th May 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-B45136
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A cast copper-alloy single loop buckle. The oval buckle frame has four loped knops, the outer two are flanking a transverse ridge. The strap bar is narrowed and offset and has a loped knob at either side. The pin is missing. The length is 23.5mm, the width is 29.5mm and the weight is 1.85g.
Created on: Wednesday 18th May 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-B44C26
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
An incomplete cast copper-alloy post-medieval hooked tag. The circular plate has an integral rectangular loop and an incomplete hook. The loop is slightly bent backwards and the plate has a bit missing near the hook. The plate has a border of pellets and is divided into four by a long cross. In the centre of the cross is a four-petal flower, with each petal in one quarter of the cross. The surviving length is 27.2mm, the width is 17.3mm and the weight is 20.2mm.
Created on: Wednesday 18th May 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-B44653
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A very worn cast lead spindle whorl. The truncated biconical spindle whorl has a small central perforation. The diameter is 28.8mm and the weight is 70.26g.
Created on: Wednesday 18th May 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-B42E24
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A cast lead spindle whorl. The truncated biconical spindle whorl has a large central perforation. It is very worn but was possibly once decorated on both faces. The diameter is 29.0mm and the weight is 57.63g.
Created on: Wednesday 18th May 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-B427B5
Object type: WEIGHT
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A lead standing weight in the form of a cone. The apex of the weight has a small, perforated hole to create a loop. The circular base of the weight is rounded. The length of the weight is 30.1mm, the width is 17.1mm and the weight is 34.32g.
Created on: Wednesday 18th May 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: NLM-B40484
Object type: JETTON
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A worn nuremberg jetton
Created on: Wednesday 18th May 2005
Last updated: Thursday 24th February 2011
No spatial data available.