Record ID: LON-358F87
Object type: RIVET
Broad period: UNKNOWN
County: Buckinghamshire
Workflow stage: Published
Two double-ended rivets or mounts for leather. They have flat circular ends, one wider than the other and a narrow shaft, circular in section and tapering at each end. One has corroded iron adhering to the outer surface of the narrower (thicker) flat end. Dimensions: 13mm long, 15mm diameter at widest end and 12mm diameter at other end, 2mm thick, 7.5g. The other has the remains of mineral-preserved leather between the two ends. It has a flattened circular raised section on the outside of the wider end, which is thicker. Dimensions: 11mm long, wide end 15mm diameter, narrow end 1…
Created on: Thursday 10th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LON-352412
Object type: MOUNT
Broad period: UNKNOWN
County: Buckinghamshire
Workflow stage: Published
Flat rectangular strip with two pierced holes 4mm apart in the centre of the strip. The long edges have been folded over by 9mm. One short edge is broken. There are incised diagonal lines along each of the long edges.
Created on: Thursday 10th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LON-339E14
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Buckinghamshire
Workflow stage: Published
Flat fragment of an object formed of two copper alloy plates with iron between them. The lower copper alloy surface has been lost. The upper copper alloy surface is decorated with incised diagonal lines forming a 'V' shape. The bottom plate is a roughly rectangular strip 11mm wide.
Created on: Thursday 10th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LON-0BEF15
Object type: STUD
Broad period: UNKNOWN
County: Buckinghamshire
Workflow stage: Published
Stud with flat, circular head and short, tapered shaft. The circular head has a rectangular protrusion on one side, indented on the upper surface. The end of the shaft is flat. There is a black surface coating on part of the upper surface of the stud. The edge of the circular head is slightly chamfered. Length of shaft 11mm long, thickness of head 2.5mm.
Created on: Tuesday 8th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: BUC-478C42
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Buckinghamshire
Workflow stage: Published
An irregular worn lump of copper alloy. The surfaces are powdery with corrosion products and no diagnostic features were noted.
Created on: Friday 13th May 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Buckmoor End', grid reference and parish protected.

Record ID: BUC-489F83
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Buckinghamshire
Workflow stage: Published
A lenth of copper alloy tube object with a 9.5mm hole. A row of four lozenge shaped holes have been cut through the wall of the tube. The upper parts of the next row of holes can also be seen just above one of the broken ends. The surface of the metal is pitted and heavily patinated.
Created on: Thursday 17th February 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Bourne End', grid reference and parish protected.

Record ID: BUC-8C63A7
Object type: WEIGHT
Broad period: UNKNOWN
County: Buckinghamshire
Workflow stage: Published
The centre of a copper alloy trade weight with the sides broken off. The resulting disc has raised edge, a raised area in the centre and a hole punched through just inside the outer border.
Created on: Thursday 27th January 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Amersham', grid reference and parish protected.