Record ID: KENT-160345
Object type: MOUNT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Lead disc, possibly a mount, with relief decoration depicting lines or spokes radiating from a central domed boss. Possibly a post-med cloth seal - there are slight remains of a projection on one side. The back disc would have a raised rivet/dome to decure the front disc?
Created on: Thursday 15th December 2005
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: KENT-427186
Object type: MOUNT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Medieval cast copper alloy gilded fitting. This subrectangular fitting is incomplete, with a worn break at its apex. The break extends across a rivet hole, with only half of a circular rivet hole remaining. There are two lines of horizontal moulding encircling the fitting just below the rivet hole. The upper surface of the fitting has a raised circular projection positioned between the lines of moulding on the left. The surface of the fitting is very worn, and is a dull green colour except on the areas where the gilding survives.
Created on: Monday 5th December 2005
Last updated: Thursday 3rd May 2012
Spatial data recorded.

Record ID: KENT-DC94B1
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Post medieval gilded copper alloy mount. The mount is in the shape of a scallop shell, with a trefoil projection extending from the base of the shell, and three lobes of decreasing size extending from the top of the shell. The trefoil projection resembles two smaller scallop shells with four incised lines, the base of each of these smaller shells are attached to either side of an oval with five incised lines along its length. Grooves divide the mount plate into ten sections with rounded ends to imitate the shape of a real shell. The mount has a green patina with a copper-gold colour sh…
Created on: Wednesday 30th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wrotham Heath', grid reference and parish protected.

Record ID: KENT-DC61B0
Object type: MOUNT
Broad period: ROMAN
County: Kent
Workflow stage: Awaiting validation
Cast copper alloy mount of a human face. The mount is of a head only, no shoulders or neck are present. The worn face with sunken eyes and a rounded nose is bordered by short or pulled back hair. Some of the original copper-alloy patina shows through the layer of dark green corrosion. Identified from photograph, the figurine was descriped as a mount by the finder. The photograph only depicts the front of the mount, there is no image of the reverse to see the mount fittings. Head mounts were used by the Romans to decorate vessels. The mount measures 27mm in length and is 21mm wide.
Created on: Wednesday 30th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: KENT-DC4CF5
Object type: MOUNT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Medieval bar mount, cast in copper alloy. The bar is rectangular with a curved surface thus appearing as a half-cylinder. The upper surface is decorated with a a ropework design on the two shorter sides, while the length of the bar has two double-lined crosses, one either side of the stud. The stud has a square cross section. The mount is 28mm long and 8mm wide, and the stud is 13mm long and 4mm wide.
Created on: Wednesday 30th November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: KENT-92E494
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Saxon mount with ring and dot pattern
Created on: Wednesday 2nd November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: KENT-760A27
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
enamelled post-medieval sword hanger?
Created on: Tuesday 1st November 2005
Last updated: Tuesday 2nd January 2018
Spatial data recorded.

Record ID: KENT-CB9F44
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A cast silver oval mount of convex cross-section, with traces of gilding and niello. The decoration shows a symmetrical composition with a debased palmette between backwards-looking addorsed birds with raised wings meeting in the centre. There are traces of gilding as well as of niello remaining in some grooves. There are two patches of tin-lead solder on the back, suggesting that the object has been modified.. Non-destructive X-ray fluorescence of the surface of the mount indicated a silver content of approximately 91%, with mercury gilding and niello. The piece is an examp…
Created on: Monday 24th October 2005
Last updated: Wednesday 24th June 2020
Spatial data recorded. This findspot is known as 'BRABOURNE', grid reference and parish protected.

Record ID: KENT-A70653
Object type: MOUNT
Broad period: MODERN
County: Kent
Workflow stage: Published
Two fragments of thin sheet metal stamped with designs. Probably of 19th century date.
Created on: Monday 10th October 2005
Last updated: Friday 24th February 2012
Spatial data recorded. This findspot is known as 'Canterbury', grid reference and parish protected.

Record ID: KENT-D0EAE7
Object type: MOUNT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Broken rectangular copper alloy decorative mount. There is a raised ridge with diagonal grooves along one long edge, and a projecting knop on the corner of the opposite edge. The upper surface has three rectangular pannels. The two outer pannels are incised with floral designs, and the central pannel is plain. The reverse is undecorated. The mount has a green patina with some brown-red areas.
Created on: Friday 30th September 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: KENT-BF0951
Object type: MOUNT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Domed mount
Created on: Saturday 30th July 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: KENT-BDCAF5
Object type: MOUNT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Tudor rose mount
Created on: Saturday 30th July 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: KENT-BDBAC6
Object type: MOUNT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Enamel Mount
Created on: Saturday 30th July 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: KENT-B3EAE3
Object type: MOUNT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Created on: Saturday 30th July 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: KENT-A593D1
Object type: MOUNT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Tudor rose ?
Created on: Friday 29th July 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: KENT-A57A02
Object type: MOUNT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Created on: Friday 29th July 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: KENT-900635
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A cast copper alloy shoe-shaped belt mount. Mounts of this type often occur in Anglo-Saxon burials of 6th century date, often in groups of two or three.
Created on: Thursday 28th July 2005
Last updated: Wednesday 21st February 2018
Spatial data recorded. This findspot is known as 'NORTHBOURNE', grid reference and parish protected.

Record ID: LON-51D282
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Copper alloy mount, either for dress or furniture. The rear of the mount has four attachments, each broken about 5mm above the main mount. The mount is cast in a rectangular shape with one knob protruding from either long end, joined to the main rectangle by a tapering shape. The style is somewhat evocative of Anglo-Saxon cruciform brooch head-plates. Probably Post-Medieval.
Created on: Wednesday 13th July 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: KENT-3DE0A0
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Published
Description: Cast, inverted pear-shaped, sub-oval object made from gilded silver. The openwork decoration shows a symmetrical composition with two birds flanking a stylised plant. The stylised plant is upside down, with its base emerging from the animal head which rests between the birds' heads; alternatively, the central stem and two pairs of branches can be read as a human body emerging from the animal head. The animal head at the top is sub-triangular and fox-like, with two small pointed ears projecting from the smooth curve of the top of the object. There is a double moulding at t…
Created on: Tuesday 12th July 2005
Last updated: Friday 14th February 2014
Spatial data recorded. This findspot is known as 'Old Romney', grid reference and parish protected.

Record ID: KENT-E52260
Object type: MOUNT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
Cast copper alloy triangular shaped mount with a subrectangular and circular openwork design. There is a zoomorphic projection from the middle of the shortest size. The mount is incomplete, with one rivet hole missing. The other rivet hole is positioned in a circular projection at the base of the triangle. The mount has a light green patina, with patches of corrosion. Probably Medieval in date.
Created on: Friday 8th July 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.