Record ID: LEIC-23DD46
Object type: JETTON
Broad period: POST MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
A Early Post Medieval jetton made of copper alloy. Krauwinckel type.
Created on: Thursday 3rd May 2012
Last updated: Thursday 3rd May 2012
Spatial data recorded.

Record ID: CORN-1AEFD1
Object type: BOWL
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
Fragment of a cast copper alloy bowl, from the base of the rim, following the curvature of the body of the bowl and tapering towards the base where it has broken away from the vessel. The curvature in profile shows that the bowl would not have been very deep, perhaps 120 mm in depth. The the curvature in plan suggests that the bowl would have been about 260 mm in diameter. Egan (2005) illustrates a similar example of a bowl fragment with a curved body on page 99, Fig.85, No.443, which is dated from c.1550-1600. Ottaway and Rogers (2002) list body fragments of thin cast cooking pot…
Created on: Thursday 3rd May 2012
Last updated: Thursday 3rd May 2012
Spatial data recorded.

Record ID: IOW-196205
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
A post-Medieval copper-alloy token farthing of Joseph Whithead of Newport, Isle of Wight, dated 1664 on token (Champion 1995: 58, ref. 118). Obverse: IOSEPH WHITHEAD.IN; 1664 in field Reverse: NEWPORT.ILE.OF.WITE; W/I K (W over I K) Diameter: 15.70mm. Weight: 0.69g. DA =12:12. It is recorded that in 1677, Widow Katherine Whithead was fined 5/- for having a "Roman" or stranger in her house. Champion, A. F., 1995. Trade Tokens of the Isle of Wight. Privately Published.
Created on: Wednesday 2nd May 2012
Last updated: Saturday 11th May 2019
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: BH-157852
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
An incomplete copper-alloy seal matrix of post-Medieval date. The printing face is oval, its device, executed in negative relief, taking the form of a letter 'S' over an anchor. The back of the printing face tapers upwards into the vertical, circular-sectioned shaft. At the top of this shaft is a circular loop with remnants of three further, equally-spaced matrix shafts projecting outwards from its perimeter. Dimensions: 26.2mm long, 16.3mm wide, 11.9mm thick. Weight: 5.66g. Roger Paul (pers. comm.) points out the similarity between the device on this seal matrix and that on a t…
Created on: Wednesday 2nd May 2012
Last updated: Wednesday 2nd May 2012
Spatial data recorded. This findspot is known as 'Watlington', grid reference and parish protected.

Record ID: YORYM-1550C7
Object type: PIPE TAMPER
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy pipe tamper of post-medieval date. The pipe tamper is of a fluted baluster type design with a flat circular base and terminating in a worn point. The tamper consists of the stem with several fluted swellings and tamping end. The metal has dark greenish-black patina and is worn. The tamper is 31.9mm long, 14.1mm in diameter and weighs 7.7g.
Created on: Wednesday 2nd May 2012
Last updated: Friday 4th May 2012
Spatial data recorded. This findspot is known as 'North Cave', grid reference and parish protected.

Record ID: BH-153B11
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
An incomplete lead-alloy hooked tag, dating from the early post-Medieval period. The cast head is inverted-sub-triangular in plan. The relief moulded decoration on the upper surface contains three equal-sized rings, each with internal petal-like segments and a raised central pellet. The rings, arranged two above one, are clustered around a central boss. The perimeter of the head is decorated with a line of moulded pellets, interrupted on the two bottom angles by larger lobes. A sub-circular lobe projects from the base of the head, its surface decorated with a flower head design. A r…
Created on: Wednesday 2nd May 2012
Last updated: Wednesday 2nd May 2012
Spatial data recorded. This findspot is known as 'Princes Risborough', grid reference and parish protected.

Record ID: BH-14C4A2
Object type: PIPE TAMPER
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A post-Medieval copper-alloy pipe tamper. The tamper is in the form of a three dimensional representation of a set of bellows. At the top are two downward-tapering, oval-sectioned handles, one of which has become bent. The upper and lower surfaces of the body are flat and inverted drop-shaped, while the space between them has two parallel ridges representing folds in the flexible central material. The bellows are shown as if open (ie. wider at the top, the thickness declining towards the bottom). A moulded double ring separates the body from the truncated-conical nozzle, at the base…
Created on: Wednesday 2nd May 2012
Last updated: Wednesday 2nd May 2012
Spatial data recorded. This findspot is known as 'Princes Risborough', grid reference and parish protected.

Record ID: LEIC-143301
Object type: COIN
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Post Medieval silver shilling of James I, London, First coinage, 1603-4.
Created on: Wednesday 2nd May 2012
Last updated: Thursday 3rd May 2012
Spatial data recorded.

Record ID: YORYM-142773
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
A complete lead cloth seal of post-medieval date. The seal is of the two disc type sealed by a central rivet and linked by an integral stem. The upper disc is stamped with a cross hatched design, possibly representing a gate or portcullis, though the degree of wear makes this difficult to determine with any degree of certainty. The reverse is undecorated. The metal is a mid brownish-white colour and is worn. The seal is 25.8mm long (including stem), 17.8mm in diameter, 3.5mm thick and weighs 4.9g. Cloth seals were used in Europe to mark cloth for commercial sale between the 13th an…
Created on: Wednesday 2nd May 2012
Last updated: Thursday 3rd May 2012
Spatial data recorded. This findspot is known as 'Halsham', grid reference and parish protected.

Record ID: NLM-130DA4
Object type: BUTTON
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy button fragment. Cast globular, probably hollow, composite button; the back is a flat discoid plate with stub of a possibly cast loop . There is the suspicion of a textured surface on the front, though this may be corrosion, or it may alternatively have been covered in fabric. Suggested date: Post-Medieval, 1700-1800. Diameter: 12mm, Height: 9.2mm, Weight: 1.60gms
Created on: Wednesday 2nd May 2012
Last updated: Tuesday 19th January 2021
Spatial data recorded.

Record ID: DUR-12CE23
Object type: COIN
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A silver penny of Charles I, 1625-1649, Oval shield on reverse. It is difficult to assign a North Number to this coin as the initial mark cannot be seen.
Created on: Wednesday 2nd May 2012
Last updated: Tuesday 8th May 2012
Spatial data recorded.

Record ID: NLM-129BB6
Object type: VESSEL
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Pottery. Two sherds of hard-fired dull red fabric with a thick internal and external black glaze. One is from the corrugated rim of a bowl. The other is from the handle of a cup. Suggested date: Post-Medieval to Modern, 1750-1900. These sherds were kindly identified by Wallace Collyer of the North Lincolnshire Pottery Research Group. Weight: 18.21gms.
Created on: Wednesday 2nd May 2012
Last updated: Wednesday 14th July 2021
Spatial data recorded.

Record ID: NLM-129228
Object type: BUTTON
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead alloy and copper alloy button fragment. Cast plano-convex discoid button with stubs of a drawn wire loop embedded in the back. Suggested date: Possibly Post-Medieval, 1600-1700 Diameter: 17mm, Thickness (clear of loop): 3.1mm, Weight: 3.88gms.
Created on: Wednesday 2nd May 2012
Last updated: Tuesday 19th January 2021
Spatial data recorded.

Record ID: NLM-127B03
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Lead weight. Cast discoid weight. One side bears an apparently cruciform arrangement of characters possibly including M N and O; the other may be similar, with one character possibly a C in post-medieval to modern style. Bent with a knife cut in one side. The mass does not correspond to any system familiar to this reporter. Suggested date: Post-Medieval, 1600-1800. Diameter: 23.1mm, Thickness: 2.7mm, Weight: 10.31gms.
Created on: Wednesday 2nd May 2012
Last updated: Tuesday 19th January 2021
Spatial data recorded.

Record ID: LANCUM-126157
Object type: COIN
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
Silver halfgroat of Charles I probably Spink 2818 inner circles both sides; mm 119a-119b.Tower mint under the King 1625-1642AD .The diameter is 16mm.
Created on: Wednesday 2nd May 2012
Last updated: Monday 17th September 2012
Spatial data recorded. This findspot is known as 'SKIPOOL', grid reference and parish protected.

Record ID: SUSS-11DB57
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
A Post Medieval copper alloy halfpenny of William III (1694-1702). Third issue, probably dated to 1699. The coin depicts a laureate and curaissed bust facing right on the obverse; the legend reads: GVLIELMVS [TERT]IVS. The reverse depicts a seated Britannia, holding spear left, with shield bottom right and holding an attribute in a lowered right hand. The reverse legend reads: BRITAN-NIA. The date is listed below the legend, not in the legend as in earlier issues. Cf. Spink 2001, No. 3556.
Created on: Wednesday 2nd May 2012
Last updated: Monday 11th June 2012
Spatial data recorded. This findspot is known as 'Near Patching', grid reference and parish protected.

Record ID: LEIC-11D227
Object type: COIN
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Post Medieval silver shilling of Elizabeth I 1584-6.
Created on: Wednesday 2nd May 2012
Last updated: Wednesday 2nd May 2012
Spatial data recorded.

Record ID: NLM-11CBF4
Object type: SCREW
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy and iron possible screw. An iron shank sheathed in copper alloy, with three turns of a finely inscribed screw thread on its outer surface. Corroded iron projects from one end; the other appears to have been cut with heavy shears. The mass may suggest further iron within the object, which is perhaps treated to retard corrosion while retaining strength. Suggested date: Post-Medieval, 1700-1800. Length: 29.8mm, Diameter (mid shaft): 6.1mm, Weight: 7.26gms.
Created on: Wednesday 2nd May 2012
Last updated: Tuesday 19th January 2021
Spatial data recorded.

Record ID: SUSS-119AA6
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
A complete Post Medieval cast copper alloy double looped trapezoidal buckle. The loops are rectangular with the outer edge pointed and bevelled. The cast copper alloy pin is still present. There is a lobed knop on either end of the strap bar. The back of the frame is flat.There is evidence of that the buckle was tinned. The buckle measures 42.49mm long, 24.32mm wide, 2.61mm thick and it weighs 9.47 grams. Whitehead (2003) illustrates similar buckles (page 82, Nos. 512-513) which he dates to c.1620-1680 AD.
Created on: Wednesday 2nd May 2012
Last updated: Monday 11th June 2012
Spatial data recorded. This findspot is known as 'Near Patching', grid reference and parish protected.

Record ID: HAMP-1156C5
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A very worn, slightly bent late 16th-century silver post-medieval halfgroat of Elizabeth I, London mint (1590-1592 AD; North 2016)
Created on: Wednesday 2nd May 2012
Last updated: Wednesday 2nd May 2012
Spatial data recorded. This findspot is known as 'Preston Candover CP', grid reference and parish protected.