Record ID: IOW-B2A6B2
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
A post-Medieval cast copper-alloy mount (1500-1700 AD). This mount is slightly convex at the front and largely flat at the rear. It has a fleur-de-lis at the top of a tapering neck, below which are two arms curving out and upwards, one at each side. The ends of these almost make contact with the outer petals of the fleur-de-lis. Below the arms the mount widens and has two raised parallel ridges and then an oval section which terminates with a small projecting lobed terminal with one raised ridge. At the rear, two integral spikes situated along the longitudinal centre-line are circul…
Created on: Sunday 15th April 2012
Last updated: Friday 4th January 2013
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-B25B68
Object type: COIN
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
A post-Medieval Irish copper-alloy 'gun money' sixpence of James II (1685-1691 AD), dated 1689 on coin and minted at Dublin or Limerick. Spink: 6583B. Obverse: IACOBVS . II.-DEI . GRATIA; Laureate and draped bust left Reverse: 1689 . MAG . BR . FRA . ET . HIB . REX; Crown with two sceptres crossed behind, in each quarter VI//I/R//July (VI = denomination) These were official tokens issued in Ireland when James was attempting to recover the English throne and and were supposed to be exchanged for silver coins of equivalent value. They were made from old cannon, bells and scrap metal…
Created on: Sunday 15th April 2012
Last updated: Wednesday 18th April 2012
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-B199D4
Object type: PADLOCK
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
An incomplete Medieval cast copper-alloy barrel padlock (c. 1250-c. 1450 AD). The barrel or chamber is a hollow cylinder which is roughly oval in cross-section and each side has a single groove running horizontally along the length of the chamber on the outside. There is a rectangular aperture on the underside of the chamber. Along the top edge of the chamber two flat arms extend upwards, one from each end. Between the arms, on the same plane, there is an extension along the top edge of the barrel which has a hole at the centre. Each arm is perforated with a circular hole. Most of on…
Created on: Sunday 15th April 2012
Last updated: Wednesday 11th September 2019
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-A875F3
Object type: COIN
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
A post-Medieval Spanish copper-alloy maravedis, possibly of Philip III (1598-1621 AD) - Philip IV (1621-1665 AD). Not further defined. The copper-alloy coins of these two kings are often squarish in shape.
Created on: Sunday 15th April 2012
Last updated: Monday 16th April 2012
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: HAMP-A86C55
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A small cast copper-alloy single-looped buckle frame of medieval date (c. 14th century AD). The frame is oval with a lipped protrusion at its outer edge which would have acted as a pin rest. The pin bar is offset and narrowed; the pin is missing. Both surfaces of the frame are flat. The pin bar and lower surface are covered in file marks. The artefact now has a dark-grey patina with patches of off-white corrosion product. For this type see Griffiths et al. (2007, 88) where they are dated to the late 14th century.
Created on: Sunday 15th April 2012
Last updated: Thursday 6th June 2013
Spatial data recorded.

Record ID: IOW-988CA7
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
An incomplete post-Medieval cast copper-alloy double-looped buckle (c. 1720-c. 1790 AD). Part of the iron chape survives and the pin is missing. The frame has moulded decoration at the front and is slightly convex at the rear. In plan, the frame is sub-rectangular. An iron spindle at the centre forms double loops. Each loop is sub-rectangular, is similar in size and has similar decoration. The outside of the frame is cusped and is formed of 'C'-shaped scroll-like features, two at each outer edge and two at each side (one either side of the spindle housing). The housing is in the for…
Created on: Saturday 14th April 2012
Last updated: Sunday 15th April 2012
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-979443
Object type: BUCKLE
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
An incomplete Medieval to post-Medieval cast copper-alloy double-looped buckle (c. 1350-c. 1650 AD). The pin is missing. The frame is convex at the front and flat at the rear. Each loop is oval in plan and similar in size and each loop is internally bevelled at the front. The central bar is 'D'-shaped in cross-section, flat at the rear. The upper face has several randomly placed grooves as decoration. This buckle is corroded and has no patina. Iron staining at the rear of the bar may indicate that the pin was made of iron. 22.58 x 18.42 x 2.46mm. Weight: 1.25g. . A similar bu…
Created on: Saturday 14th April 2012
Last updated: Tuesday 17th April 2012
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-977341
Object type: BUCKLE
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
An incomplete Medieval to post-Medieval cast copper-alloy double-looped buckle (c. 1350-c. 1650 AD). The pin is missing. The frame is convex at the front and flat at the rear. Each loop is oval in plan and similar in size and each loop is internally bevelled at the front. The central bar is 'D'-shaped in cross-section, flat at the rear. The upper face has several randomly placed grooves as decoration. This buckle is corroded and has traces of a dark green patina. 29.79 x 26.77 x 2.55mm. Weight: 5.09g. . A similar buckle has been published and dated c. 1350-1650 (Whitehead 199…
Created on: Saturday 14th April 2012
Last updated: Tuesday 17th April 2012
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-9732F3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
An incomplete and slightly misshapen Medieval cast copper-alloy single-looped buckle frame (c. 1250-c. 1400 AD). The pin is missing. The frame is convex at the front and flat at the rear. It is sub-oval in plan with an ornate outer edge. The outer edge has a knop at each end. On the upper surface, between the knops, are two transverse ridges creating a central pin-rest. The narrowed off-set bar is sub-square in cross-section. This buckle is worn and abraded and has a dark-green patina with patches of buff corrosion products. 18.20 x 20.74 x 2.85mm. Weight: 1.94g. Similar bu…
Created on: Saturday 14th April 2012
Last updated: Tuesday 17th April 2012
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: IOW-96BE63
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
An incomplete Medieval cast copper-alloy and enamelled harness pendant (c. 1300-c. 1400 AD). In plan, the pendant is flat and hexagonal and has an incomplete suspension loop at the top. There is a globular knop at the centre from which radiate six thin raised bands that form six equal sized cells. At the end of each band there is a rounded projecting knop, including one situated in front of the suspension loop shaft. Each cell is filled with alternating red and blue enamel. Minute flecks of gilding are present on the edges between the knops. It is possible that the radiating bands, t…
Created on: Saturday 14th April 2012
Last updated: Monday 4th July 2016
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: HAMP-95BCB3
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Hampshire
Workflow stage: Awaiting validation
An incomplete copper-alloy artefact of uncertain date. The artefact has a narrowed bar which is incomplete, it is oval in cross section and 5.35mm wide. The artefact thickens towards the main body (max 8.45mm wide, 6.1mm thick), it is D shaped in cross section and narrows towards the other break which is 5.85mm wide. There are two sets of horizontal parallel incisions at both breaks. The artefact is pitting in places with a grey patina.
Created on: Saturday 14th April 2012
Last updated: Thursday 26th April 2012
Spatial data recorded.

Record ID: HAMP-959214
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded and bent, plain copper-alloy sheet rivet which would have been used to hold repairs to a vessel in place. The artefact is sub-rectangular in form, having originally been broadly hexagonal. It have been folded in on themselves from the sides before being folded back, the folds protruding beyond the side, one side is incomplete. Similar examples found in Norwich tend to be found in post-medieval contexts (Margeson 1993, 92-93; refs. 574, 575).
Created on: Saturday 14th April 2012
Last updated: Saturday 14th April 2012
Spatial data recorded.

Record ID: HAMP-956345
Object type: VESSEL
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete integral cast copper alloy handle lug, which possibly dates to the 13th to 17th centuries. The rest of the vessel is missing. In plan the lug in broadly square with a bevelled upper face, the reverse is mostly flat with a raised outer edge. In the centre of the lug is an oval perforation which has a maximum internal diameter of 7.6mm. A section of the vessel remains attached to the lug, it is 20.0mm in length and 6.7mm wide, a small fragment remains which is 11.85mm in length and 8.15mm wide.
Created on: Saturday 14th April 2012
Last updated: Saturday 14th April 2012
Spatial data recorded.

Record ID: HAMP-94C684
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete single-looped cast copper-alloy buckle of medieval date. The buckle is of oval form with an offset and narrowed pin bar. There are mouldings at the ends of the pin bar. The frame thickens towards the centre of the frame 9.0mm (max) 6.3mm (min), the frame is concave. The pin is missing. The buckle has a mid grey and green patina.
Created on: Saturday 14th April 2012
Last updated: Saturday 14th April 2012
Spatial data recorded.

Record ID: HAMP-94B283
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete single-looped cast copper-alloy buckle of medieval date. The buckle is of oval form with an offset and narrowed pin bar. There are mouldings at the ends of the pin bar. The frame is bevelled externally on its upper surface and broadly flat on the lower with some rounding at the edges. The outer edge is expanded both in width and thickness. The pin is missing. The buckle has a mid brown patina.
Created on: Saturday 14th April 2012
Last updated: Thursday 6th June 2013
Spatial data recorded.

Record ID: HAMP-939525
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A Medieval - Post Medieval copper alloy knife handle end cap with fragment of the iron tang remaining (late 15th - 16th century). The terminal has an oval cross-section that expands to form a semi-circular projection. The end cap has three ridges running along the top of the cap. A fragment of the iron tang survives, iron corrosion is visible on the end cap.
Created on: Saturday 14th April 2012
Last updated: Saturday 14th April 2012
Spatial data recorded.

Record ID: HAMP-934963
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Hampshire
Workflow stage: Awaiting validation
An incomplete copper-alloy unidentified object of uncertain date. The artefact is broadly hexagonal in plan and D shape in cross section, there are two circular perforations and one edge is incomplete. There is a irregular projection on the reverse, the remainder of the reverse is flat.
Created on: Saturday 14th April 2012
Last updated: Saturday 14th April 2012
Spatial data recorded.

Record ID: IOW-8566D6
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
An incomplete post-Medieval copper-alloy book fitting in the form of a clasp (c. 1550-c. 1600 AD). The fitting is formed of two sheet copper-alloy plates riveted together. However, only a small portion of the back sheet or plate has survived. In plan, it has a flaring 'fish-tail' attachment end and tapers to the terminal end. The 'fish-tail' end is notched but the notches are slightly damaged. It has three sets of linear chevrons formed of grooves and extending lengthways at the 'fish-tale' end. At the terminal end there are parallel grooves forming a triangular shape and beyond th…
Created on: Friday 13th April 2012
Last updated: Tuesday 17th April 2012
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: BH-8519A2
Object type: COIN
Broad period: ROMAN
County: Central Bedfordshire
Workflow stage: Awaiting validation
A copper-alloy nummus of the House of Constantine; 'She-wolf and twins' reverse, minted AD 330-335. Dimensions: 14.6mm diameter, 1.3mm thick. Weight: 1.38g.
Created on: Friday 13th April 2012
Last updated: Wednesday 18th April 2012
Spatial data recorded. This findspot is known as 'Great Billington', grid reference and parish protected.

Record ID: BH-850671
Object type: COIN
Broad period: ROMAN
County: Central Bedfordshire
Workflow stage: Awaiting validation
A worn copper-alloy sestertius of Hadrian (AD 117-138). Dimensions: 32.1mm diameter, 4.8mm thick. Weight: 22.15g.
Created on: Friday 13th April 2012
Last updated: Wednesday 18th April 2012
Spatial data recorded. This findspot is known as 'Great Billington', grid reference and parish protected.