Record ID: IOW-B2A6B2
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
A post-Medieval cast copper-alloy mount (1500-1700 AD). This mount is slightly convex at the front and largely flat at the rear. It has a fleur-de-lis at the top of a tapering neck, below which are two arms curving out and upwards, one at each side. The ends of these almost make contact with the outer petals of the fleur-de-lis. Below the arms the mount widens and has two raised parallel ridges and then an oval section which terminates with a small projecting lobed terminal with one raised ridge. At the rear, two integral spikes situated along the longitudinal centre-line are circul…
Created on: Sunday 15th April 2012
Last updated: Friday 4th January 2013
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: KENT-811752
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Published
An incomplete Anglo-Saxon copper-alloy mount, triangular in shape and flat in profile, decorated with a gilded triple-strand interlace pattern and on an iron backing. There is evidence of perforation near the pointed end of the mount, and a possible lug near the wide end. The mount is in good condition but the reverse is covered in iron corrosion products. The mount is 32.7 mm long, 50.99 mm wide, 6.92 mm thick and weighs 21.71 g. Kevin Leahy suggests that this a piece of Pressblech foil, attached to iron. He suspects that, given the iron, that it is a vandyke from a bucket, still …
Created on: Friday 13th April 2012
Last updated: Wednesday 15th October 2014
Spatial data recorded. This findspot is known as 'Thanet', grid reference and parish protected.

Record ID: LEIC-7FBF61
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Post medieval copper alloy belt mount, 23mm long, 22mm wide and 6mm thick. The object is in fair condition and weighs 4.14 grams. It is sub-rectangular in form and section and consists of a trilobed motif picked out in raised dots whichs sits above trapezoidal 'wings' the base of this part of the object has a tapering protrusion in its centre which terminates in a point. The other edge of the tri-lobed motif has three short triangular projections one central and one in each corner. The object has small patches of gilding adhering to its surface. The reverse has two circular sectioned…
Created on: Friday 13th April 2012
Last updated: Tuesday 17th April 2012
Spatial data recorded.

Record ID: LEIC-7F5E56
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Post medieval copper alloy belt mount, 26mm long, 20mm wide and 7mm thick. The object is in faor condition and weighs 2.59 grams. It is rectangular in form and section and consists of a cross in a dotted circular border with fluer like terminales at the upper and lower edges and with smaller sub-triangular protrusions at each side. The reverse has two rectangular sectioned prongs which have been bent to hold the mount in place.
Created on: Friday 13th April 2012
Last updated: Tuesday 17th April 2012
Spatial data recorded.

Record ID: YORYM-7ECDB1
Object type: MOUNT
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
A complete cast copper alloy mount of medieval date. The head of the mount is quatrefoil in plan with a raised triangular decorative element in the centre. From the reverse of the head a long, off centre attachment spike projects. The metal has a mid reddish-green patina and is worn. The mount is 19.9mm long, 19.4mm wide, 2.1mm thick and weighs 4.3g.
Created on: Friday 13th April 2012
Last updated: Monday 16th April 2012
Spatial data recorded. This findspot is known as 'Tickton', grid reference and parish protected.

Record ID: LEIC-590B57
Object type: MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy bar-mount with terminal and central lobes, c. 1150-1450 (Egan 1991). The object is corroded and incoplete with parts being chipped away. One of the terminal lobes is decorated withy incised lines, springing from centre. The object still has two prongs attached. Each is 5 mm long. Similar type has been described by Egan 1991, Fig. 1148-9 and 1160-1. Length: 38 mm Width: 17 mm Thickness: 7 mm Weight: 4.66 g
Created on: Wednesday 11th April 2012
Last updated: Wednesday 11th April 2012
Spatial data recorded.

Record ID: LEIC-58D7E1
Object type: MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy bar-mount with terminal and central lobes, c. 1150-1450 (Egan 1991). The object is corroded and incoplete with parts being chipped away. There is no obvious decoration. Cast rivets are still in place at each end. Similar type has been described by Egan 1991, Fig. 1148 and 1149. Length: 36 mm Width: 15 mm Thickness: 5 mm Weight: 3.76 g
Created on: Wednesday 11th April 2012
Last updated: Wednesday 11th April 2012
Spatial data recorded.

Record ID: HAMP-58AE01
Object type: MOUNT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A complete Medieval copper-alloy bar mount with separate rivets. The bar mount is rectangular in plan and trapezoidal in cross section. There are two complete copper-alloy rivets within the mount.
Created on: Wednesday 11th April 2012
Last updated: Thursday 12th April 2012
Spatial data recorded.

Record ID: LEIC-5876B4
Object type: MOUNT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy bar-mount with terminal and central lobes, c. 1150-1450 (Egan 1991). The object is corroded and incoplete with parts being chipped away. The oval centre is hollow and decorated with deeply incised transverse lines. There is a perforated protrusion at each end. One still contain a copper alloy rivet. Similar type has been described by Egan 1991, Fig. 1160 and 1161. Length: 17 mm Width: 7 mm Thickness: 3 mm Weight: 0.67 g
Created on: Wednesday 11th April 2012
Last updated: Wednesday 11th April 2012
Spatial data recorded.

Record ID: LVPL-581616
Object type: MOUNT
Broad period: ROMAN
County: Cheshire West and Chester
Workflow stage: Awaiting validation
Cast copper alloy terminal mount possibly dating to the Roman period, (43-410AD). The object is sub-rectangular in cross-section. At one end the object terminates with a pyramidal knop. Below this the object tapers to the opposite end. The object is decorated with six rectangular collars which are irregularly spaced. Projecting from the base of the object is a thin semi-circular projection. The object has a mid-green patina.
Created on: Wednesday 11th April 2012
Last updated: Friday 20th April 2012
Spatial data recorded. This findspot is known as 'Tarporley', grid reference and parish protected.

Record ID: LVPL-5739C2
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation
Cast copper alloy cruciform mount dating to the Post-Medieval period, (1500-1700). The object is cruciform in plan and oval in cross-section. Each arm of the cross terminates with an oval knop. Below the lower knop the object expands outwards slightly before narrowing to form a circular sectioned projection possibly for attachment. The object has been silvered or tinned.
Created on: Wednesday 11th April 2012
Last updated: Friday 20th April 2012
Spatial data recorded. This findspot is known as 'Blakenhall', grid reference and parish protected.

• 

  Image not taken

Record ID: NLM-571CA2
Object type: MOUNT
Broad period: MODERN
County: North East Lincolnshire
Workflow stage: Awaiting validation
White Metal Possible Mount. Cast metal strip, broken in half, with upper curved edges and a straighter lower edge which suggest the object has been trimmed here, perhaps to remove an unwanted text or title. An embossed motif, which appears reversed on the back, comprises a cushion crown over four elongated leaves arranged as a saltire flanked by a pair of anchors on a ground of further similar leaves. The scheme recalls that of military or institutional badges. Suggested date: Modern, 1800-1900. Length: 44.5mm, Height: 12.4mm, Thickness: 1.2mm, Weight: 4.19gms.
Created on: Wednesday 11th April 2012
Last updated: Monday 14th January 2013
No spatial data available.

• 

  Image not taken

Record ID: SF-554485
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper-alloy mount of Medieval or Post-medieval date. It is a flat leaf shaped mount with five decorative holes and incised lines to simulate foliage. It has two integral rivets on the rear, both of which are broken. It measures 40.53mm in length, 20.80mm in width, 2.55mm in thickness and weighs 6.37g.
Created on: Wednesday 11th April 2012
Last updated: Wednesday 11th April 2012
Spatial data recorded. This findspot is known as 'Covehithe', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-553005
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper-alloy flat rectangular mount of Medieval date. It has a central decorative hole flanked by holes for two separate circular rivets which are missing. It is decorated with a border and a series of diagonal lines over the face which appear to be random. It measures 33.32mm in length, 13.66mm in width, 0.83mm in thickness and weighs 2.28g. This mount is similar to other examples published from London (Egan and Pritchard, 1991: nos 1049 and 1050).
Created on: Wednesday 11th April 2012
Last updated: Wednesday 11th April 2012
Spatial data recorded. This findspot is known as 'Covehithe', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-551617
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper-alloy sexfoil mount of Medieval date. It is dome shaped with a hollow back with six evenly shaped facets radiating from the centre. It has a central hole for a rivet which is missing. It measures 13.26mm in diameter, 4.50mm in height and weighs 0.60g. This mount is similar to other examples published from London (Egan and Pritchard, 1991: no 952).
Created on: Wednesday 11th April 2012
Last updated: Wednesday 11th April 2012
Spatial data recorded. This findspot is known as 'Covehithe', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-550F05
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A copper-alloy sexfoil mount of Medieval date. It is dome shaped with a hollow back with six evenly shaped facets radiating from the centre, each of which divide into three at the outside edge. It has a central hole for a rivet which is missing. It measures 15.15mm in diameter, 5.59mm in height and weighs 1.05g. This mount is similar to other examples published from London (Egan and Pritchard, 1991: no 952).
Created on: Wednesday 11th April 2012
Last updated: Wednesday 11th April 2012
Spatial data recorded. This findspot is known as 'Covehithe', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-5501E7
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy bar mount with terminal and central lobes of Medieval date with holes for two separate rivets, one of which is missing. The lobes are hollow backed and the central lobe has a hole in the middle and is decorated with crude transverse lines. It measures 23.96mm in length, 10.76mm in width, 5.34mm in thickness and weighs 2.59g. This mount is similar to other examples published from London (Egan and Pritchard, 1991: nos 1157 and 1158).
Created on: Wednesday 11th April 2012
Last updated: Wednesday 11th April 2012
Spatial data recorded. This findspot is known as 'Covehithe', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-54E5C6
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy mount of Medieval date. It is a flat bar mount with a hollow back. It is formed of two oval lobes separated by three horizontal bands forming a collar. There are two integral rivets on the back, one of which is broken and the other bent. There is no decoration. It measures 24.47mm in length, 7.54mm in width, 2.22mm in thickness and weighs 2.51g. It is similar to examples published from London (Egan and Prticahrd, 1991, no 1166).
Created on: Wednesday 11th April 2012
Last updated: Wednesday 11th April 2012
Spatial data recorded. This findspot is known as 'Covehithe', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-54D556
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy mount of Medieval or Post-medieval date. It is a flat oval mount with a tri-lobe knop at one end. There are two integral rivets on the back, both of which are broken. There is no decoration. It measures 28.57mm in length, 15.56mm in width, 2.19mm in thickness and weighs 3.24g.
Created on: Wednesday 11th April 2012
Last updated: Wednesday 11th April 2012
Spatial data recorded. This findspot is known as 'Covehithe', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-54BB41
Object type: MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy mount of Medieval or Post-medieval date. It is a flat mount formed of a group of 17 pellets arranged in an oval, like a bunch of grapes in appearance. There is a single integral rivet on the back. It measures 26.06mm in length, 14.32mm in width, 3.06mm in thickness and weighs 2.55g.
Created on: Wednesday 11th April 2012
Last updated: Wednesday 11th April 2012
Spatial data recorded. This findspot is known as 'Covehithe', grid reference and parish protected.