Record ID: FAKL-4FBB74
Object type: COIN
Broad period: ROMAN
County: York
Workflow stage: Published
Copper alloy disc, corroded with no trace of surface decoration. While the module would be correct for a Roman coin variations in thickness suggest that it might be piece of casting spillage.
Created on: Thursday 17th May 2012
Last updated: Thursday 17th May 2012
Spatial data recorded. This findspot is known as 'Fulford', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-4FB8B6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy buckle frame of Medieval date. It is a trapezoidal frame with a rounded attachment end and a centre bar which is rectangular in section. The bar is slightly narrowed for the pin which is missing. There are small knops top and bottom at the rounded attachment end. At the outside edge are four horizontal grooves, one of which would have served as the pin rest. It measures 23.83mm in length, 18.28mm in width, 2.07mm in thickness and weighs 2.64g.
Created on: Thursday 17th May 2012
Last updated: Thursday 17th May 2012
Spatial data recorded. This findspot is known as 'Akenham', grid reference and parish protected.

Record ID: YORYM-4FAA47
Object type: COIN
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation
A silver penny of Charles I, garnished oval shield reverse, London mint, 1625 - 1649. The coin has been pierced at its centre by a cross shaped hole.
Created on: Thursday 17th May 2012
Last updated: Thursday 24th May 2012
Spatial data recorded. This findspot is known as 'Knapton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-4FA521
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy buckle frame of Medieval date. It is a d-shaped frame which is d-shaped in section. The bar is slightly narrowed for the pin which is missing. It measures 16.99mm in length, 16.94mm in width, 3.28mm in thickness and weighs 3.53g.
Created on: Thursday 17th May 2012
Last updated: Thursday 17th May 2012
Spatial data recorded. This findspot is known as 'Akenham', grid reference and parish protected.

Record ID: LIN-4FA1B2
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete Early Medieval copper alloy pin. The head is biconical, with a median band. There is a collar below the head. Only a small part of the circular-sectioned shaft is preserved.
Created on: Thursday 17th May 2012
Last updated: Friday 25th May 2012
Spatial data recorded. This findspot is known as 'near Louth', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-4F9495
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy buckle frame of Medieval date. It is an oval frame with a central bar which is rectangular in section. The centre bar is slightly narrowed for the pin which is missing. It measures 29.45mm in length, 23.16mm in width, 1.99mm in thickness and weighs 5.91g.
Created on: Thursday 17th May 2012
Last updated: Thursday 17th May 2012
Spatial data recorded. This findspot is known as 'Akenham', grid reference and parish protected.

Record ID: DOR-4F8096
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A farthing of Charles II. Date: Post Medieval - 1675 Dimensions: 22.49 mm Weight: 5.38 g Die axis: 6
Created on: Thursday 17th May 2012
Last updated: Friday 18th May 2012
Spatial data recorded. This findspot is known as 'Piddlehinton', grid reference and parish protected.

Record ID: LIN-4F7E34
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete Early Medieval copper alloy pin. Only the head is preserved: flattened biconical, with a collar below.
Created on: Thursday 17th May 2012
Last updated: Friday 25th May 2012
Spatial data recorded. This findspot is known as 'near Louth', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-4F6FC6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy buckle frame of Medieval date. It is a double oval frame which is d-shaped in section and slightly angled. The centre bar is slightly narrowed for the pin which is present. There is a groove in the outside edge which serves as a pin rest. There is no decoration. The pin is separately cast and is bent around the centre bar. It is flat in section and tapers to a point. It measures 21.99mm in length, 17.53mm in width, 2.27mm in thickness and weighs 2.07g. It is similar to examples published from London (Egan and Pritchard, 1991, no 339).
Created on: Thursday 17th May 2012
Last updated: Thursday 17th May 2012
Spatial data recorded. This findspot is known as 'Akenham', grid reference and parish protected.

Record ID: YORYM-4F71E8
Object type: COIN
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
A copper alloy As of an uncertain emperor, uncertain reverse, uncertain mint, 27 BC - AD 260.
Created on: Thursday 17th May 2012
Last updated: Thursday 24th May 2012
Spatial data recorded. This findspot is known as 'Hotham', grid reference and parish protected.

Record ID: DOR-4F6674
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A groat of Elizabeth I. Reference: North Vol II, No. 1986 Date: Post Medieval - 1558 - 61 Dimensions: 23.42 mm Weight: 1.47 g Die axis: 10
Created on: Thursday 17th May 2012
Last updated: Friday 18th May 2012
Spatial data recorded. This findspot is known as 'Piddlehinton', grid reference and parish protected.

Record ID: LIN-4F5F45
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete Early Medieval copper alloy pin. The head is spherical, with, probably, a collar below. Only a small part of the circular-sectioned shaft is preserved.
Created on: Thursday 17th May 2012
Last updated: Friday 25th May 2012
Spatial data recorded. This findspot is known as 'near Louth', grid reference and parish protected.

Record ID: YORYM-4F5241
Object type: BROOCH
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy Trumpet derivative brooch of Roman date. The head of the brooch is semi-circular with short, worn knops projecting from each corner. A third knop at the top of the curved edge marks the remains of the attachment loop which no longer survives. A D-shaped sectioned bow extends out from the head at a 90 degree angle before turn sharply downwards again at 90 degrees. An ovoid flange extends from the bottom of the remaining section of bow creating a stepped effect when the brooch is viewed in profile. An area of blue enamel survives on the head and traces of…
Created on: Thursday 17th May 2012
Last updated: Thursday 24th May 2012
Spatial data recorded. This findspot is known as 'Hotham', grid reference and parish protected.

Record ID: LEIC-4F4BA1
Object type: BROOCH
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
A Roman period copper alloy probably of a Hippocampus facing right; 20.61mm long, 13.70mm wide, and 4.12mm thick. The brooch weighs 1.21g and is similar to that of no.1417 in Hattatt's Visual Catalogue figure 222. The brooch is sub rectangular in form and rectangular in section. The overall shape is a curved tapering plate, resembling the letter J with a small rectangular protrusion on the outer side of the curve which represents the start of a limb. There is no sign of decoration on the object itself. The reverse portion of the brooch consists of a copper alloy spring and catch…
Created on: Thursday 17th May 2012
Last updated: Tuesday 30th July 2019
Spatial data recorded. This findspot is known as 'Bosworth', grid reference and parish protected.

Record ID: DOR-4F4732
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A sixpence of Elizabeth I. Reference: North Vol II, No. 1997 Date: Post Medieval - 1569 Dimensions: 24.77 mm Weight: 3.00 g Die axis: 12
Created on: Thursday 17th May 2012
Last updated: Friday 18th May 2012
Spatial data recorded. This findspot is known as 'Osmington', grid reference and parish protected.

Record ID: LIN-4F4021
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete Early Medieval copper alloy pin. Only the head is preserved: flattened biconical head, with a collar below.
Created on: Thursday 17th May 2012
Last updated: Friday 25th May 2012
Spatial data recorded. This findspot is known as 'near Louth', grid reference and parish protected.

Record ID: LVPL-4F3F46
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
County: Kent
Workflow stage: Awaiting validation
Three fragments of iron metal working waste. The objects are sub-oval in plan and are dark brown in colour. Each piece is pitted but not corroded. Found within the same area the pieces indicate possible metal working. The date is unknown. Large piece: 33.01mm in length, 30.23mm in width, 5.71mm thick, 15.9g. Medium piece: 32.96mm in length, 23.07mm in width 12.89mm thick, 19.4g. Small piece: 27.02mm in length, 26.20mm in width, 9.84mm thick, 7.5g.
Created on: Thursday 17th May 2012
Last updated: Wednesday 23rd May 2012
Spatial data recorded. This findspot is known as 'Smarden', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-4F3C03
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy buckle frame of Medieval date. It is a double oval frame which is d-shaped in section and slightly angled. The centre bar is slightly narrowed for the pin which is missing. There is no decoration. It measures 20.84mm in length, 17.29mm in width, 1.56mm in thickness and weighs 1.60g. It is similar to examples published from London (Egan and Pritchard, 1991, no 339).
Created on: Thursday 17th May 2012
Last updated: Thursday 17th May 2012
Spatial data recorded. This findspot is known as 'Akenham', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-4F30E5
Object type: STRAP END
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy strap end of Medieval date. It is trapezoidal in shape and is a two-piece strap end with a sheet spacer. At each end are circular holes for the seperately cast rivets which are present. There is no decoration. It measures 41.97mm in length, 9.93mm in width, 2.25mm in thickness and weighs 3.24g. It is similar to examples published from London (Egan and Pritchard, 1991, nos 692 and 694).
Created on: Thursday 17th May 2012
Last updated: Thursday 17th May 2012
Spatial data recorded. This findspot is known as 'Akenham', grid reference and parish protected.

Record ID: LEIC-4F2C65
Object type: BROOCH
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Part of a medieval copper alloy annular plate brooch frame with an inscription on one side reading +IhESVS and on the other AGRACIA (the complete inscriptions would be + IhESVS NAZARENVS and AVE MARIA GRACIA PLENA or similar). The inscription is of stylised, wide lombardic lettering, separated by incised hatching of fine parallel lines. Linear borders run along the inner and outer edges of the frame. Very similar brooches have been recorded on the PAS database - see NMS-185F14, SWYOR-490007 and LON-BOE896. These vary only in the details of the inscription, such as spellings and ab…
Created on: Thursday 17th May 2012
Last updated: Thursday 17th May 2012
Spatial data recorded.