Record ID: DENO-9A73D6
Object type: AXE
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation
Prehistoric axe; Fragment of Neolithic polished stone axe. Shattered fragment of hard, green-grey stone with an area of the original surface remaining. This area shows the curved, highly polished surface of the axe, although the exact form cannot be determined from such a small piece. Length 38.2mm, width 31.8mm, depth 9.1mm, weight 10.51g.
Created on: Thursday 3rd May 2007
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: DENO-9A9831
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval buckle; Cast copper alloy single loop buckle with openwork design incorporating two 3-dimensional beasts in relief. Buckle has a D-shaped frame which widens and deepens towards the back of the frame to give a broad, concave, 3-dimensional cross section. This is decorated in openwork moulding with two opposing beasts, possibly dogs, standing chest to chest but with both heads facing forwards. The pin bar is recessed, narrow and circular in cross section. The pin is missing but would have touched the buckle frame between the heads of the two beasts. Dated to the late 11th or 12t…
Created on: Thursday 3rd May 2007
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: DENO-9AAC13
Object type: FINGER RING
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Roman or Early Medieval copper-alloy finger ring, possibly created as a reuse of an earlier object. The ring consists of a flat band of metal which has been bent round to form a ring. The two ends of the band do not meet, leaving a small gap in the circle of the ring. One end of the band of metal tapers and curves to a pointed terminal but the other end is rather crudely cut off square across the band. This indicates that the band may originally have been longer and therefore part of a different object such as, for example, a narrow bangle. The band is decorated with an incised line ru…
Created on: Thursday 3rd May 2007
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: WMID-B31832
Object type: AXE
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation
A fragment of a knapped flint axehead, dating to the Neolithic period, between 3500 – 2100 BC (length: 35mm; width: 37mm; thickness: 14mm; weight: 23.4g). The axe fragment is sub-square in plan and ovoid in section. The narrowed tip of the artefact is all that remains and has numerous arrises on the surface where it has been extensively worked. The artefact has an off-white colour with numerous areas of iron staining on the surface.
Created on: Friday 4th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Ancaster', grid reference and parish protected.

Record ID: DENO-042D30
Object type: BEAD
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation
Amber bead; Small, circular, 'doughnut-shaped' bead of bright orange amber. Surface mostly pitted and matt. Chipped in one area, showing the bright, glassy texture of the amber. Weight 0.91g, Diameter 13.11mm, Thickness 9.36mm (6.88mm min) Unknown date - amber beads are very difficult to date. They are reasonably commonly known from Bronze Age, Roman, Anglo-Saxon and Medieval contexts.
Created on: Tuesday 8th May 2007
Last updated: Tuesday 14th June 2016
Spatial data recorded.

Record ID: NCL-053E77
Object type: COIN
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Post-Medieval silver coin of Henry VIII (1509-1547). (N 1773 - 1778, 1808 - 1814, 1854 - 1858)
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: DENO-06D1C5
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Early Medieval mount; Anglo-Saxon mount with Style 1 beasts, dating to the 6th or early 7th century; Cast copper alloy mount with gilded openwork sections. Mount is sub-rectangular with crossing, relief-moulded lines sectioning it into triangular sections. The crossing point of these lines is off-set, giving differing sizes to the resulting sections. The largest section is undecorated but has a possible remnant of solder present, which may indicate that something else was once attached, potentially a silver appliqué, in the Bichrome Style. The small section (diagonally opposite the l…
Created on: Tuesday 8th May 2007
Last updated: Friday 7th February 2020
Spatial data recorded.

Record ID: LIN-06EFE1
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Incomplete cast copper alloy buckle. The buckle is rectangular and missing its side frame and bar. The lip is widened.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-072646
Object type: PIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy pin head. The head is bi-conical and has a small length of incomplete shank below. The diameter of the shank is 2mm
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-0735F7
Object type: CASTING WASTE
Broad period: BRONZE AGE
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy jet with a shaped runner below. The jet is derived from casting in bronze. The jet is oval in plan, slightly concave on its upper surface and convex on its underside representing the depression in the clay or other mould material which was filled with molten metal. Projecting from the convex underside is an irregularly shaped runner. The runner is roughly oval in plan with a clean, slightly curved terminal. The surface of the terminal is much smoother than the rest of the object, suggesting that it was cut at this point to detach the runner from the freshly cast objec…
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: WMID-077C36
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
A complete struck/ hammered copper alloy nummus of Constantine I, minted in Lyons, between AD 313-6 (diameter: 22mm; thickness: 1mm; weight: 3.4g). The coin is in a worn and poor condition. Ref: Sutherland, C, H, V & Carson, R, A, G, 1966, 'The Roman Imperial Coinage Volume VII: Constantine and Licinius', pages 122-5.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Ancaster', grid reference and parish protected.

Record ID: LIN-078CC8
Object type: CASTING WASTE
Broad period: BRONZE AGE
County: Lincolnshire
Workflow stage: Awaiting validation
A small irregularly shaped piece of casting waste. The fragment has a very pitted surface.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-0796C3
Object type: VESSEL
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Lead pot mend. The mend has two irrgularly shaped caps with a joining shank between in the centre. No pottery survives between.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LIN-07A406
Object type: MANUFACTURE AND PROCESSING
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Unworked piece of Jet. The piece is roughly trapezoid in plan and rectangular in cross-section. The edges and fractures are very worn and smooth suggesting that it has been a piece collected off the Lincolnshire coast, which lies only a few miles to the east. Although the piece is unworked the field in which it was discovered has also produced evidence for Roman occupation. Since Jet was used as a material for beads and bracelets it was thought best to record this piece incase more evidence arises.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: WMID-07B682
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
A complete struck/ hammered copper alloy nummus of Constantine II, minted in Trier in AD 326 (diameter: 19mm; thickness: 1.5mm; weight: 3.7g). The coin is in a slightly worn but good condition. Ref: Sutherland, C, H, V & Carson, R, A, G, 1966, 'The Roman Imperial Coinage Volume VII: Constantine and Licinius', page 209, ref no 479.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Ancaster', grid reference and parish protected.

Record ID: LIN-07C426
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: WMID-07F3F3
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
A complete struck/ hammered copper alloy nummus of Constantine I (AD 306-37), minted in Trier, between AD 320-1 (Reece Period 16) Reverse type VIRTVS EXERCIT depicting two captives seated either side of a standard inscribed with VOT/XX. Mint of Trier. RIC VII, p. 189, no. 291. The coin is in a slightly worn but good condition. The coin measures: diameter: 20mm; thickness: 1mm; weight: 2.9g.
Created on: Tuesday 8th May 2007
Last updated: Friday 5th March 2021
Spatial data recorded. This findspot is known as 'Ancaster', grid reference and parish protected.

• 

  Image not taken

Record ID: LIN-07F9E6
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Blundered soldier on horseback riding down an enemy.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: WMID-081AB1
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
A complete struck/ hammered copper alloy nummus of Constantine I, minted in Trier, between AD 333-4 (diameter: 17mm; thickness: 1.5mm; weight: 2.7g). The coin is in a worn but fair condition. Ref: Sutherland, C, H, V & Carson, R, A, G, 1966, 'The Roman Imperial Coinage Volume VII: Constantine and Licinius', page 218, ref no 561.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Ancaster', grid reference and parish protected.

Record ID: LIN-082455
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.