Back to simple search | Back to advanced search

    You searched for:

    • Createdby: 1055
    • County: Lincolnshire

  • Thumbnail image of NLM-F4FC68

Record ID: NLM-F4FC68
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch. Cast trumpet brooch, Mackreth type TR 1.x3 (especially pl. 83 no. 5247). A plain trumpet head has the stub of an integrally cast loop or tab on its top, and a loop behind to retain fastening gear [lost]. The bow is then slightly constricted before an equally slight expansion over a possibly eroded moulding, and a more definite mid bow moulding which, like the others, does not pass all around the bow. There is the suspicion of a horizontal groove between this and another vaguely defined moulding after which the lower bow tapers once again. The foot is lost, though …
Created on: Wednesday 16th January 2019
Last updated: Thursday 17th January 2019
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-F4F242

Record ID: NLM-F4F242
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch. Cast bow and fantail brooch, cf. Mackreth type CD H 7.a. A plain tubular case, clenched behind, retains an axis bar, possibly iron, for a hinged pin [lost]. The wings are clasped by a bow of rounded section, which tapers gently to a V-shaped end. Here, there are a pair of moulded ridges or stops. Below these, the foot expands as a fantail with a central triangular ridge, and with a rhomboid stud standing proud of its apex between the ridges noted above. The stub of a catch plate runs down the middle of the back of the foot. Suggested date: Early Roman, 60-125 Leng…
Created on: Wednesday 16th January 2019
Last updated: Thursday 17th January 2019
Spatial data recorded. This findspot is known as 'near Brookenby', grid reference and parish protected.


  • Thumbnail image of NLM-F4E3D9

Record ID: NLM-F4E3D9
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy strap end fragment. A cast straight-sided plate with a split end bearing a single rivet of diameter 2.1mm and length 2.5mm in a drilled hole to attach the plates to the strap [lost], cf. Thomas Class E type 4, of Borre style. The plate bears a bordered panel of interlace comprising roughly symmetrical loops and strands, with grouped bars at the base of the design, possibly appended to an anthropomorphic design. A slightly thickened transverse rib separates this decoration from the [now] plain surface bearing the rivet. A green surface patina has been lost [to probably rec…
Created on: Wednesday 16th January 2019
Last updated: Thursday 17th January 2019
Spatial data recorded. This findspot is known as 'near Brookenby', grid reference and parish protected.


  • Thumbnail image of NLM-F4D7ED

Record ID: NLM-F4D7ED
Object type: STUD
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Silver and opal stud. A thin beaten concavo-convex silver setting with the stubs of thin silver wire of diameter 0.6mm projecting from either end. The edge of the setting is finely cut to denticulated form with a series of tiny [length c.0.5mm] triangular flaps clasping the stone. The stone is a rounded teardrop-shaped opal with a lightly facetted surface. The wires appear to be set diagonally relative to the setting, so this was perhaps detached from a more complex clustered arrangement, perhaps in a brooch or pendant. Despite a reputation for being an unlucky stone, in part promoted …
Created on: Wednesday 16th January 2019
Last updated: Thursday 17th January 2019
Spatial data recorded. This findspot is known as 'Claxby', grid reference and parish protected.


  • Thumbnail image of NLM-F4CBE6

Record ID: NLM-F4CBE6
Object type: BELL
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Silver hawking bell. A spherical hollow probably three piece bell, comprising two hemispheres of unequal sizes and a cast D-section loop. A pair of small blowholes or sounding holes of diameter 1.4mm appear in the hemisphere closer to the loop. The light construction would be apt to a bell attached to the jesses of a hawk. Ref. TBC.Suggested date: Post-Medieval, 1500-1700. Given its material and suspected age, this object is to be submitted to the Treasure process. Diameter: 11.2mm, Height (overall): 12.6mm, Weight: 1.14gms.
Created on: Wednesday 16th January 2019
Last updated: Thursday 17th January 2019
Spatial data recorded. This findspot is known as 'Claxby', grid reference and parish protected.


  • Thumbnail image of NLM-F422D4

Record ID: NLM-F422D4
Object type: DISC
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy disc. A milled disc or worn coin; very slightly smaller in diameter than a Georgian farthing though perhaps worn to that state, and also rather thin and light for a coin. The same broad dating, however, seems apt. Suggested date: Post-Medieval, 1714-1806 Diameter: 21.3mm, Thickness: 1mm, Weight: 2.67gms
Created on: Wednesday 16th January 2019
Last updated: Thursday 17th January 2019
Spatial data recorded. This findspot is known as 'near Brookenby', grid reference and parish protected.


  • Thumbnail image of NLM-F41952

Record ID: NLM-F41952
Object type: RING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy ring. A small cast D-section ring. Possibly used to suspend or retain another object; at 8mm diameter, the aperture would probably be too large for this to have served as a strung bead. Suggested date: Post-Medieval, 1500-1800 Diameter: 13.0mm, Band Width: 2mm, Band Thickness: 3.9mm, Weight: 1.61gms
Created on: Wednesday 16th January 2019
Last updated: Thursday 17th January 2019
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-F40B8D

Record ID: NLM-F40B8D
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Silver thimble. A domed or conical pressed metal thimble with a separate foot ring soldered to a plain basal zone. This also accommodates a stamped maker's mark and hallmarks in rectangular panels with cut corners as follow: J.F/lion walking left/possibly Gothic letter ?N/anchor on its side. These indicate the Birmingham Assay Office, and a probable date of either 1862 or 1912 if the letter is correctly identified. Most of the wall is occupied by finely machine stamped circular pits which appear as if ascending the wall from left to right. The top bears similar pits in concentric rin…
Created on: Wednesday 16th January 2019
Last updated: Thursday 17th January 2019
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-F3FC63

Record ID: NLM-F3FC63
Object type: BUTTON
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Lead or tin alloy and copper alloy button. Cast biconvex discoid button with an inserted drawn copper alloy wire loop, polished to a silvery tint. Suggested date: Medieval, 1250-1400 Diameter: 11.3mm, Thickness (clear of loop): 8.4mm, Weight: 4.46gms
Created on: Wednesday 16th January 2019
Last updated: Thursday 17th January 2019
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-F3E19D

Record ID: NLM-F3E19D
Object type: BEAD
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Blue glass bead. A biconical bead appearing dark or cobalt blue under reflected light and slightly paler under transmitted light, with a large [diameter 4mm] stringing hole; one half appears slightly larger than the other. The surface bears fine circumferential lines suggesting machine finishing and the rim between the halves is sharply defined. This bead is larger than the 5-7mm diameter range proposed for Roman beads (Guido 1978, page 97), and its crisp outline contrasts with the rounded forms of the numerous Anglo-Saxon beads of a comparable dark blue tint. Suggested date: Post-Medi…
Created on: Wednesday 16th January 2019
Last updated: Thursday 17th January 2019
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of DENO-F22E58

Record ID: DENO-F22E58
Object type: FINGER RING
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A gold early medieval finger ring of the Viking period (c. 1000-1100). The ring is made of a curved rod with a rectangular cross-section and bevelled edges. The rod is wider (c. 4 mm) at the centre and tapers to the back where the ends are drawn into wires (2 mm in diameter) which overlap and are wound once round each other. Overall, the ring has an external diameter of 24 mm and an internal diameter of 17 mm. It weighs 8.56 g. The ring is similar in style to a Viking finger ring from Weston Colville, Cambridgeshire (CAM-A32F23; 2008 T141). The report for that ring says: "The ring may…
Created on: Wednesday 16th January 2019
Last updated: Wednesday 16th January 2019
No spatial data available.


  • Thumbnail image of NLM-E0952F

Record ID: NLM-E0952F
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy weight. Cast flat discoid weight with bevelled edge and upstanding rim, and with a basal pit suggesting its finishing on a lathe. The hollow upper side bears stamped notation in modern style: 1 OZ [one ounce]; it is actually slightly underweight. Suggested date: Post-Medieval, 1850-1900 Diameter: 27.9mm, Thickness: 7.3mm, Weight: 26.18gms
Created on: Tuesday 15th January 2019
Last updated: Wednesday 16th January 2019
Spatial data recorded. This findspot is known as 'near Brookenby', grid reference and parish protected.


  • Thumbnail image of NLM-E08A45

Record ID: NLM-E08A45
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy thimble. Conical pressed metal thimble with a foot ring, immediately above which the wall is occupied by close set circular machine stamped pits which appear to ascend the wall in diagonal rows from righty to left. The top is occupied by a rectilinear grid or lattice of larger indentations. Lightly squashed. Suggested date: Post-Medieval, 1850-1900 Diameter: c.21mm, Height: 18.7mm, Thickness (wall): 0.5mm, Weight: 3.97gms
Created on: Tuesday 15th January 2019
Last updated: Wednesday 16th January 2019
Spatial data recorded. This findspot is known as 'near Brookenby', grid reference and parish protected.


  • Thumbnail image of NLM-E08016

Record ID: NLM-E08016
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy buckle fragment. Cast pin and elongated U-shaped chape from a buckle with both mounted on a separate steel spindle. Thickly concreted sandy material adheres, possibly a result of burning or from the decay of an iron fitting. Suggested date: Post-Medieval, 1660-1720 Length: 31.4mm, Height: 14.5mm, Thickness (clear of concretion): 3.6mm, Weight: 4.13gms
Created on: Tuesday 15th January 2019
Last updated: Wednesday 16th January 2019
Spatial data recorded. This findspot is known as 'near Brookenby', grid reference and parish protected.


  • Thumbnail image of NLM-E07152

Record ID: NLM-E07152
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Lead possible spindle whorl. Cast whorl of plano-convex section with an off-centre moulded aperture of diameter 6.8mm. Shrinkage lines around the hole suggest the object was cast in an open mould or, given the slightly rough feel of the curved surface, perhaps a hollow in the sand of a casting bed. Patinated. The hole is partly burred over on the convex side. The mass suggests this performed a function distinct from that of most spindle whorls, perhaps as a flywheel, or for the plying of thicker cord. Suggested date: Unknown, Roman to Post-Medieval, 43-1800 Diameter: 36.3mm, Thickness…
Created on: Tuesday 15th January 2019
Last updated: Wednesday 16th January 2019
Spatial data recorded. This findspot is known as 'near Brookenby', grid reference and parish protected.


  • Thumbnail image of NLM-E0676B

Record ID: NLM-E0676B
Object type: NAIL
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nail. Cast nail with a square section shank and a rhomboid head with four lightly faceted faces to a low pyramidal top. The tip is slightly bent. Copper alloy nails would be used where the risk of fire or explosion was to be averted, as in a flour mill, as they would not strike sparks if in accidental contact with iron hobnails etc. Suggested date: Post-Medieval, 1800-1900 Length: 89.4mm, Diameter (head, long axis): 12.2mm, Thickness (shank): 3.7mm, Weight: 12.65gms
Created on: Tuesday 15th January 2019
Last updated: Wednesday 16th January 2019
Spatial data recorded. This findspot is known as 'near Brookenby', grid reference and parish protected.


  • Thumbnail image of NLM-E05C29

Record ID: NLM-E05C29
Object type: NAIL
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nail. Cast nail with a round section upper shank, a square section tip and a round flat head. Copper alloy nails would be used where the risk of fire or explosion was to be averted, as in a flour mill, as they would not strike sparks if in accidental contact with iron hobnails etc. Lightly bent. Suggested date: Post-Medieval to Modern, 1850-1950. Length: 57.2mm, Diameter (head): 14.4mm, Thickness (upper shank): 4.7mm, Weight: 9.65gms
Created on: Tuesday 15th January 2019
Last updated: Wednesday 16th January 2019
Spatial data recorded. This findspot is known as 'near Brookenby', grid reference and parish protected.


  • Thumbnail image of NLM-E050BC

Record ID: NLM-E050BC
Object type: PURSE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy purse bar fragment, as kindly identified by the finder. Cast round section bar, slightly tapered towards what is taken as its outer end. A smaller and a larger projection each bear an aperture, in the latter case this is drilled to a diameter of 3mm. An incised groove appears above the latter. Fiercely abraded. Suggested date: Post-Medieval, 1500-1600 Length: 64.3mm, Height: 8.7mm, Diameter (bar): 5.6mm, Weight: 8.69gms
Created on: Tuesday 15th January 2019
Last updated: Wednesday 16th January 2019
Spatial data recorded. This findspot is known as 'near Brookenby', grid reference and parish protected.


  • Thumbnail image of NLM-E043CA

Record ID: NLM-E043CA
Object type: VESSEL
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy vessel fragment. Cast cauldron leg of sub-rectangular section, slightly tapered, with a prominent rounded longitudinal rib set centrally on its outer side. Traces of adherent soot may suggest use on the hearth. Broken across both ends. Suggested date: Medieval, 1200-1500 Height: 52.1mm, Width: 38.3mm, Thickness (overall): 21.8mm, Weight: 158.44gms
Created on: Tuesday 15th January 2019
Last updated: Wednesday 16th January 2019
Spatial data recorded. This findspot is known as 'near Brookenby', grid reference and parish protected.


  • Thumbnail image of NLM-E038D8

Record ID: NLM-E038D8
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch fragment. Cast Hod Hill brooch, Mackreth type HOD HILL 4a1. A small square head bear three vertical ribs standing in relief, flanked by a pair of small short projecting wings. The top of the lower bow is plain. Abraded. Suggested date: Early Roman, 50-60. Length: 13.3mm, Width: 19.7mm, Thickness: 2.4mm, Weight: 1.55gms
Created on: Tuesday 15th January 2019
Last updated: Wednesday 16th January 2019
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 60,575
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 73,335
  • Mean quantity: 1.211
  • Maximum: 998

Filter your search

1 - 20 of 60,575 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.