Record ID: LIN-A74211
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A complete Middle Saxon copper-alloy pin. It has a faceted rectangular cuboid head. The head and shank are worn and mostly covered with iron corrosion. A ringed dot motif is visible on one of the two large faces; all other faces are corroded. There is a small collar beneath the head. The shank is circular in section, straight, and tapers to a point.
Created on: Monday 6th July 2015
Last updated: Wednesday 29th July 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-A727D1
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A complete Middle Saxon copper-alloy pin. It has a flattened globular head with a small collar beneath it. The shaft has a right angled bend to it approximately 23mm from the head; the shaft then bends at angle downwards, but it is possible that this latter bend is modern damage. The shaft tapers to a point. The bends make it difficult to measure this pin, but it appears to have had a length of around 88mm.
Created on: Monday 6th July 2015
Last updated: Wednesday 29th July 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-D708C6
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A gilt copper-alloy head from a triple-pin linked set. The head is flat, circular and has a bulbous headed copper-alloy rivet in the centre. The surface of the head is decorated with an intricate geometric design, apparently the same in each quarter, comprising a network of grooves and ridges. Gilding survives within the grooves. A stub of copper-alloy - coated with patches of iron corrosion - extends from the base, indicating where the pin once was. An iron rivet is located in the surface of the head just above this, and a possible additional iron rivet is along the same alignment bu…
Created on: Tuesday 2nd June 2015
Last updated: Tuesday 25th September 2018
Spatial data recorded. This findspot is known as 'near Horncastle', grid reference and parish protected.

Record ID: LIN-DE3449
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A Middle Saxon copper-alloy pin. The head is biconical with a flat median band. A small collar is situated beneath the head; an incomplete shaft extends below. The head is highly pitted and corroded.
Created on: Thursday 21st May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-4AB1F3
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper-alloy pin dating to the Middle Saxon period (c. AD720-850). The head is a flattened bun-shape. A small collar is situated beneath the head, from which extends a fragment of shaft.
Created on: Thursday 14th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-37031C
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Published
A Middle Saxon copper-alloy pin. The head is a faceted rectangular cube. The two main panels each contain two ringed dot motifs aligned vertically. The two side panels each contain a single ringed dot motif. A small collar is located beneath the head, from which extends an incomplete shaft.
Created on: Wednesday 13th May 2015
Last updated: Monday 1st August 2016
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-36FAB6
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A Middle Saxon copper-alloy pinhead. The head is a faceted rectangular cube. The four side panels each contain a ringed dot motif. A small collar is located beneath the head, from which extends an incomplete shaft.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-36EAB9
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A possible Middle Saxon copper-alloy pinhead. The head is roughly globular, with a small extension at the base that may have been where the shaft extended. The surface is corroded.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-36E29B
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A Middle Saxon copper-alloy pin. The head is biconical and has a flat median band. A small collar is situated beneath the head, and from this extends an incomplete shaft.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-36DDB1
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A Middle Saxon copper-alloy pin. The head is biconical and has a flat median band. A small collar is situated beneath the head, and from this extends an incomplete shaft.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-36D60C
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A Middle Saxon copper-alloy pin. The head is biconical and undecorated. A small collar is situated beneath the head, and from this extends an incomplete shaft.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-36CE2E
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A Middle Saxon copper-alloy pin. The head is bun-shaped with a flat median band. A small collar is situated beneath the head, and from this extends an incomplete shaft.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-36B773
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A Middle Saxon copper-alloy pin. The pin has a flattened globular head bearing no decoration. A small collar is situated beneath the head, and from this extends a complete shaft. A slight kink in the shaft is notable approximately two thirds of the way down, presently marked by a band of corrosion. The shaft below this is swollen towards the middle.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-36A8AE
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A Middle Saxon copper-alloy pin. The head is biconical with a flat median band. The head is decorated with a spiral of moulded lines, which when viewed from above twist in a clockwise direction. A small collar is situated beneath the head, and from this extends an incomplete shaft.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-369B89
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A Middle Saxon copper-alloy pin. The head is a faceted cube. All four side panels contain a ringed dot motif, as do the eight facets. The top panel is undecorated. A small collar is situated beneath the head, and from this extends a complete shaft. The shaft is circular in section and has a bend of slightly more than 90 degrees, approximately half way along its length. The shaft after the bend is swollen towards the centre. The terminal is pointed.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-350E40
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A complete Middle Saxon copper-alloy pin, dating circa 720-850. The head is a faceted cube. Corrosion covers many of the panels, but where the original surface is visible this indicates the head is undecorated. A small collar is located beneath the head. The shank is complete and has a small intentional kink half-way along its length. The centre of the lower half of the shaft is swollen.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-34F0B5
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete Middle Saxon copper-alloy pin, dating circa 720-850. The head is a faceted cube. All four side faces are decorated with a ringed dot motif. A small collar is located beneath the head. The shank is broken shortly after.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-34E4F6
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete Middle Saxon copper-alloy pin, dating circa 720-850. The head is a faceted cube, though corrosion obscures any detail on the panels. A small collar is located beneath the head. The shank is broken shortly after.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-34D45E
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete Middle Saxon copper-alloy pin, dating circa 720-850. The head is biconical and undecorated. Only a small portion of a worn and incomplete shank survives.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.

Record ID: LIN-34CA8C
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A possible incomplete Middle Saxon pin, dating circa 720-850. The head is formed of a roughly bun-shaped head of lead. An incomplete iron shank of circular section extends below.
Created on: Wednesday 13th May 2015
Last updated: Thursday 21st May 2015
Spatial data recorded. This findspot is known as 'East Lindsey', grid reference and parish protected.