Back to simple search | Back to advanced search

    You searched for:

    • Created by: Richard Henry
    • Sort: updated

  • Thumbnail image of HAMP-1A1F81

Record ID: HAMP-1A1F81
Object type: PURSE
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A worn cast copper-alloy fragment of a pendent frame from late medieval or early post-medieval purse. The object is elongated and broadly rectangular in shape, and L-shaped in cross section. There is one sewing hole on its lower side. It would have been through such holes that the frame was sewn to the fabric purse (Geake 2001, 43). On the upper surface there are traces of incised diagonal double grooves decorating the frame in a series of 'X's: these might originally have been nielloed. There are a series of zig-zag incisions filling the centre of the areas within the incised lines. T…
Created on: Friday 22nd October 2010
Last updated: Thursday 8th November 2018
Spatial data recorded.


  • Thumbnail image of HAMP-AD4604

Record ID: HAMP-AD4604
Object type: BRACELET
Broad period: BRONZE AGE
County: Wiltshire
Workflow stage: Published Find published
A gold Bronze age bracelet. In its current form, this is a roughly annular band with a small overlap. One end is a slightly thickened terminal of thin crescentic shape, the other is a thin, wavy edge most likely the product of the reworking of a broken end. It can be assumed that the original form was a penannular bracelet with two matching thickened terminals and a broad gently C-shaped band section, which survives in the reworked form. Remodelling after the loss of one terminal involved pulling the two ends together to overlap and tying them together with a thread (not surviving) pas…
Created on: Tuesday 21st August 2007
Last updated: Saturday 3rd November 2018
Spatial data recorded. This findspot is known as 'Donhead St.Marys', grid reference and parish protected.


  • Thumbnail image of HAMP-C00BB5

Record ID: HAMP-C00BB5
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy single-looped Medieval buckle with an ornate, cast frame. The frame's large outer edge has large, knopped ends which travel slightly outwards. Between the knops are three transverse grooves, delineating two ridges. The pin bar opposite is offset and narrowed. The frame is bevelled internally on both surfaces. The reverse is flat. The copper-alloy in survives.
Created on: Saturday 28th April 2012
Last updated: Thursday 30th August 2018
Spatial data recorded.


  • Thumbnail image of HAMP-C1CA65

Record ID: HAMP-C1CA65
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete medieval copper alloy asymmetrical buckle. The frame is broadly ovoid with a curved outer edge and a straighter inner edge and rounded top and bottom edge. The inner edge has a recessed middle section for the pin which is now missing. From this inner edge projects a rectangular frame forming the strap bar. Whitehead (2003) illustrates a similar buckle, no. 539, which he dates from 1350 to 1450 AD.
Created on: Sunday 22nd July 2012
Last updated: Saturday 11th August 2018
Spatial data recorded.


  • Thumbnail image of HAMP-BFFBA0

Record ID: HAMP-BFFBA0
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy single-looped medieval buckle with an ornate, cast frame. The frame's large outer edge has large, knopped ends which travel slightly outwards. Between the knops are five transverse grooves, delineating four ridges. The pin bar opposite is offset and narrowed. The frame is bevelled internally on both surfaces. The reverse is decorated with the same design. The pin is missing.
Created on: Saturday 28th April 2012
Last updated: Friday 10th August 2018
Spatial data recorded.


  • Thumbnail image of HAMP-1E35D6

Record ID: HAMP-1E35D6
Object type: BRASS
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy Medieval probable memorial brass. The brass is rectangular in form and cross section, it is missing both ends due to old breaks. Part of an inscription is visible which appears to be in black letter script consisting of '[...] M'. At the centre of the remaining section is a perforation with an incomplete nail (19.75mm in length) which is circular in cross section. There are scratches visible on the reverse which is undecorated.
Created on: Wednesday 21st December 2011
Last updated: Friday 3rd August 2018
Spatial data recorded.


  • Thumbnail image of HAMP-5D4621

Record ID: HAMP-5D4621
Object type: PURSE
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A damaged and incomplete late medieval cast copper-alloy purse bar, of Ward Perkins Class A2. The surviving elements constitute the bars - one complete and bent, the other is incomplete; the break is located near the central block. The central block is shield shaped with a flattened top and base. It features a central longitudinal perforation for the shank (Dia.: 6.0mm), recessed at the base. The block measures 19.25 by 17.25 by 10.95mm. The boss is inscribed 'IhS' on one face, possibly 'RI' on the other face. The back is incomplete at the base on the face which is inscribed 'IhS'. E…
Created on: Tuesday 4th September 2012
Last updated: Friday 6th July 2018
Spatial data recorded.


  • Thumbnail image of HAMP-A4F521

Record ID: HAMP-A4F521
Object type: PLATE BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Published Find published
An incomplete and corroded 1st century AD, cast copper-alloy Roman cruciform plate brooch. The brooch is broadly lozengeform in plan, with four opposing protrousions located at each tip. One of these protrousions conceals the double semicircular lug in which the pin would have sat; only the head of the pin survives now corroded in place. Opposite, on the longest axis, a protrousion conceals a corroded incomplete catch-plate. The projection expands slightly before the tip. There are two other projections, set at a ninety degree angle from the pin and catch-plate, both appear to be incom…
Created on: Thursday 2nd August 2012
Last updated: Monday 11th June 2018
Spatial data recorded.


  • Thumbnail image of HAMP-10D4A1

Record ID: HAMP-10D4A1
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A fair copper-alloy Roman As of Faustina I DIVA FAVSTINA, Rome mint(Circa 141 - 150 AD, Reece period 7, RIC III p. 166 cf. 1162). This is a possible Coin of British Association, Walker, 1988: pp. 295, 298.
Created on: Tuesday 22nd December 2009
Last updated: Wednesday 25th April 2018
No spatial data available.


  • Thumbnail image of HAMP-F83442

Record ID: HAMP-F83442
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper-alloy 13th- or 14th-century medieval bar-mount with pendent loop. The upper surface of the bar mount is rectangular in plan and trapezoidal in cross-section. The bar narrows at its base and is looped back on itself, terminating in a square stop which is joined to the front section of bar (and, originally, through the belt) by a single copper-alloy rivet which survives. The pendant sits within the loop at the bottom of the bar and is quadrilobate in form. The edge from which it hangs is flattened. The surfaces of the pendent are bevelled externally and feature fi…
Created on: Wednesday 8th December 2010
Last updated: Monday 5th March 2018
Spatial data recorded. This findspot is known as 'Thruxton CP', grid reference and parish protected.


  • Thumbnail image of HAMP-FF63C7

Record ID: HAMP-FF63C7
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy medieval harness pendant with traces of enamel. The suspension loop is at 90 degrees to the face. The pendant is broadly lozengiform in plan with four semi circular knops, one protruding from each side. The centre of the harness pendant has a raised convex boss with a circular perforation in the centre. There is evidence of red enamel in places on the harness pendant. All four knops have been bent upwards, the right hand corner of the lozengiform is bent backwards. The reverse is undecorated. The harness pendant has a mid brown patina with patches of light gree…
Created on: Tuesday 1st May 2012
Last updated: Thursday 22nd February 2018
Spatial data recorded.


  • Thumbnail image of HAMP-72E643

Record ID: HAMP-72E643
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete medieval cast copper alloy elaborate quatrefoil harness pendant with openwork decoration. The suspension loop is at 90 degrees to the face, the pendant is an elaborate quatrefoil in plan with four small projections and is bent upwards slightly. There are five oval perforations of different sizes on the front face, four are located in a broad lozengeform pattern. A fifth perforation is located off centre. The front face is decorated with incisions running from the small projections which form the elaborate quatrefoil, one side has two parallel incisions. The reverse is flat …
Created on: Thursday 12th April 2012
Last updated: Thursday 22nd February 2018
Spatial data recorded.


  • Thumbnail image of HAMP-D69E85

Record ID: HAMP-D69E85
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
Lozenge-shaped dress hook with projecting knops at angles and midway along sides. Separate floral cast element at centre, attached to the backplate with domed-headed pin and butterfly clip, only part of which remains on the reverse. Original recurving hook and attachment bar now missing, but their position indicated by solder marks. Maker's mark on reverse, now illegible, but resembling a spray of leaves (?) within a parade shield.
Created on: Tuesday 4th September 2007
Last updated: Wednesday 14th February 2018
Spatial data recorded.


  • Thumbnail image of HAMP-D6F928

Record ID: HAMP-D6F928
Object type: PENANNULAR RING
Broad period: BRONZE AGE
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A Bronze age, plain, penannular gold ring of roughly circular cross section. One terminal is damaged revealing that the piece comprises a gold covering over a base metal core. The covering is also split in one place.
Created on: Tuesday 4th September 2007
Last updated: Tuesday 5th December 2017
Spatial data recorded.


  • Thumbnail image of HAMP-6C7C91

Record ID: HAMP-6C7C91
Object type: PENANNULAR RING
Broad period: BRONZE AGE
County: Hampshire
Workflow stage: Published Find published
Small, plain penannular gold ring of flattened oval cross section; the ends taper slightly to flat terminals. Examination in the laboratory indicated that the object has a base metal core. External diameter 15.5x14mm; internal diameter 4.5mm; breadth 6mm; weight 6.18 grams. Non-destructive X-ray fluorescence analysis of the surface of penannular ring from 'Havant area', Hampshire, indicated a gold content of 76 - 79 %, silver content of 16 - 18 %, the remainder being copper. The ring weighs 6.18 grams and the specific gravity measurement of 9 indicates that it has a base metal core.
Created on: Thursday 30th August 2007
Last updated: Tuesday 5th December 2017
Spatial data recorded. This findspot is known as 'Havant Area', grid reference and parish protected.


  • Thumbnail image of HAMP-0171C2

Record ID: HAMP-0171C2
Object type: PENANNULAR RING
Broad period: BRONZE AGE
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
Penannular gold ring with hoop of circular cross-section; original decorative banding in broad stripes of yellow and paler gold are very worn and best perceptible near inner surface. Roughness of gold at one terminal could be due to damage. The surface is heavily worn; scores and scrapes are likely to have occurred post-depositionally. Visual inspection suggests that the piece comprises a gold covering over a base metal core. Diameter 18-18.5mm; internal diameter 6.5mm; breadth 6.5mm; weight 9.51 grams. A well known Late Bronze Age type, decorative in character, dating to circ…
Created on: Thursday 6th September 2007
Last updated: Tuesday 5th December 2017
Spatial data recorded. This findspot is known as 'Rowlands Castle', grid reference and parish protected.


  • Thumbnail image of HAMP-C18814

Record ID: HAMP-C18814
Object type: PENANNULAR RING
Broad period: BRONZE AGE
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
Small penannular gold ring of sub-circular section with decorative narrow banding in yellow and paler gold; corrosion of the silver-rich stripes has caused blackening in places. The external surfaces are patchily worn. The gap is bridged by green corrosion products probably deriving from a base metal core. External diameter 14mm-15mm; internal diameter circa 7mm; breadth 4.5mm; width of gap circa 2mm; weight 4.13 grams. Composition Surface analysis indicated gold and silver contents od approx. 57% and 40% respectively. Identification A well known Late Bronze Age type, d…
Created on: Wednesday 22nd August 2007
Last updated: Tuesday 5th December 2017
Spatial data recorded. This findspot is known as 'Crawley', grid reference and parish protected.


  • Thumbnail image of HAMP-E4ECD5

Record ID: HAMP-E4ECD5
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded and incomplete copper-alloy single-looped medieval Limoges-style buckle, consisting of a cast frame and sheet plate. The frame is oval with a narrowed offset bar; the pin is missing. It has an expanded and angled outer edge which has grooved decoration in the form of an elongated S-shapes with angled terminals. The sheet plate has been folded around the frame. It is recessed at the frame end to accommodate the frame and has a central pin slot. The plate has two rivet holes at the attachment end; these survive only on the upper sheet with the end of the lower sheet bent and …
Created on: Friday 20th August 2010
Last updated: Friday 24th November 2017
Spatial data recorded. This findspot is known as 'Penton Mewsey CP', grid reference and parish protected.


  • Thumbnail image of HAMP-C21454

Record ID: HAMP-C21454
Object type: FINGER RING
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval silver-gilt finger-ring set with a clear stone (probably rock-crystal). The back of the hoop is cabled and the shoulders left plain apart from a central groove which widens into a spandrel occupied by a simple foliate motif. The bezel is raised and moulded into a pie-crust form to simulate the petals of a flower. The finger-ring is silver-gilt and dates from the late fifteenth or early sixteenth centuries.
Created on: Monday 3rd September 2007
Last updated: Tuesday 19th September 2017
Spatial data recorded.


  • Thumbnail image of HAMP-EBBA05

Record ID: HAMP-EBBA05
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Published Find published
An early-medieval roundel which consists of a round gold tray inlaid with cloisonné enamel. The enamelled front is decorated with the right Hand of God, the dextera Dei, descending in a gesture of blessing or divine acknowledgment. The Hand is in opaque white enamel, separated by an opaque yellow cuff from the opaque blue cloud from which it emerges. On either side of the Hand descend two branched elements dividing into three sprigs, each terminating in an opaque yellow disc. The background is of translucent green enamel. The undecorated underside has four larger and two smaller pier…
Created on: Wednesday 5th September 2007
Last updated: Monday 4th September 2017
Spatial data recorded. This findspot is known as 'Thames Area', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 1,315
Search server index: objects

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 1,345
  • Mean quantity: 1.023
  • Maximum: 7

Filter your search

Institution

1 - 20 of 1,315 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.