Back to simple search | Back to advanced search

    You searched for:

    • Created by: Henry Weeds
    • Created after: Monday 1st January 2018
    • Created before: Friday 9th February 2018

  • Thumbnail image of KENT-F3E296

Record ID: KENT-F3E296
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy vessel handle which has been broken and repaired at some point. Description: Medieval to Post Medieval (1350-1700) vessel handle: The copper alloy handle, which has been cast, is broadly sub-rectangular in plan and tapers to a rounded blunted point. The broken end has two copper-alloy fixings on the front and back side that post-date the making of the original handle and are clearly related to repairing the object once it broke. The rear side fixing is still more complete and has a hole at the top. The handles has a hatched design with 6 diagonal lines visible, encompa…
Created on: Monday 29th January 2018
Last updated: Wednesday 21st February 2018
Spatial data recorded.


  • Thumbnail image of KENT-F371F7

Record ID: KENT-F371F7
Object type: VESSEL
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A late Medieval - early Post Medieval cast copper-alloy vessel handle from a posnet or skillet dating 14th - 16th century. Description: The handle is wide at one end and tapers and sharply curves to the other (the outsid eof the handle) The break is jagged and occured towards the body of the vessel. The handle is decorated with a ring and dot motif conisting of 5 double rings with a central dot; these motifs are the most common type of decoration found on posnet handles. The underside is heavily corroded with extensive orrosion pitting. The copper-alloy has a heavily motted dark …
Created on: Monday 29th January 2018
Last updated: Wednesday 21st February 2018
Spatial data recorded.


  • Thumbnail image of KENT-F2B993

Record ID: KENT-F2B993
Object type: BROOCH
Broad period: ROMAN
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy Roman Two-piece Colchester derivative with pierced lug c. 1st c AD Description: The humped bow has a raised transervse ridge running along its centre before ending at the break point. The underside is undecorated.The head comprises of tubular wings that are of cross-section design holding the spring design in place. The springs end pin is intact and curls back in on itself meeting at the central lug. The baseplate and catch is entirely missing The is an overall green and brown patina with nflecks of bright copper from recent damage. Measurements: Leng…
Created on: Monday 29th January 2018
Last updated: Wednesday 21st February 2018
Spatial data recorded.


  • Thumbnail image of KENT-CCEA65

Record ID: KENT-CCEA65
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
Hooked eye and tag toggle clasp dating from between 16th and 17th century. Description: This toggle clasp dates from the early post-medieval period. A flat disc tapers up to a plate connecting it with the pain body. Two transverse ridges cross the collar with iron residue from a now corroded rivet underneath before widening and thinning to a single transverse ridge. This piece ends in a small dome shaped plate capped by a small knop. Directly beneath the single transverse collar is another corroded iron rivet. The convex rear side also has two corresponding voids where the iron riv…
Created on: Monday 15th January 2018
Last updated: Wednesday 17th January 2018
Spatial data recorded.


  • Thumbnail image of KENT-CC78E9

Record ID: KENT-CC78E9
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy post-medieval acorn mount with two lugs on the reverse. Description: This post-medieval mount is styled in an acorn pattern as demonstrated by the incuse hatching in imitation of an acorn on the lower half. The upper half is smooth ending in a small knop at the end. The stem below the hatching design bends sharply to one side at an almost 90 degree angle. The reverse lugs are incomplete and it is hard to tell which direction they faced if at all. The lug closer to the knop appears broken as it is significantly shorter than the other. There is an overall green patina …
Created on: Monday 15th January 2018
Last updated: Wednesday 17th January 2018
Spatial data recorded.


  • Thumbnail image of KENT-CBED06

Record ID: KENT-CBED06
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A heavily worn and corroded middle Bronze Age flat axehead fragment. Dating to EBA III c. 1800-1600 BC. Description: This approximately thumbnail size flake from a flat axehead is heavily worn and corroded. There is a slight raised ridge down the middle of the fragment. It's colour is almost black on one side and a mottled green finish on the other. Measurements: Length: 0.836mm Width: 0.613mm Thickness: 0.096mm Weight: 3.31g Discussion: The poor condition of this object makes determining its exact nature difficult but a number of Bronze Age Specialist agree that it is likely a frag…
Created on: Monday 15th January 2018
Last updated: Wednesday 9th May 2018
Spatial data recorded.


  • Thumbnail image of KENT-CB8369

Record ID: KENT-CB8369
Object type: SPUR
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
Copper-alloy spur fragment, platinated with a brown-purple hue. Description: The fragment survives as the terminal end of the right side of a rowel spur, with a broken suspension loop at the junction between the two sides. The square side sections curve almost straight down to the terminal ends where it has been snapped. Measurements: Length: 45.60mm Width: 0.447mm Thickness: 0.116mm Weight: 17.84g Discussion: The object, due to its size, might be a child's spur but this cannot be ascertained for certain due to its incompleteness. A similar example is illustrated by Read (200…
Created on: Monday 15th January 2018
Last updated: Wednesday 17th January 2018
Spatial data recorded.


  • Thumbnail image of KENT-39CC78

Record ID: KENT-39CC78
Object type: SPUR
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A fragment of cast copper-alloy Post-Medieval spur frame, c. 17th century. Description: The fragment survives as the terminal end of the right side of a probable rowel spur, snapped towards the rowel attachment end. The outer face has a raised ridge centrally where the spur kinks upwards. There are incised lines forming a rounded triangle around each of the attachment holes. Unlike medieval spurs, the terminal holes are further apart forming an oblique figure of eight. There is an concave indent in the frame between the two holes facing upwards. On both holes, the outermost edges h…
Created on: Monday 8th January 2018
Last updated: Thursday 11th January 2018
Spatial data recorded.


  • Thumbnail image of KENT-39180E

Record ID: KENT-39180E
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A very badly worn copper-alloy mount of Post-Medieval date. Description: Tripartite design with trefoil or fantailed shape designs on the ends. Transverse groove visible at one end, other is too badly worn to be certain. Back is undecorated but has two integral facing prongs facing inwards. Mottled brown in colour with patches of darker green. Measurements: Length: 21.60 Width: 11.42 Thickness: 1.82 Discussion: Double pointed prongs have been suggested as horse-harness mounts (Hume 1974)
Created on: Monday 8th January 2018
Last updated: Thursday 11th January 2018
Spatial data recorded.


  • Thumbnail image of KENT-386F0D

Record ID: KENT-386F0D
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A heavily worn copper-alloy mount of Post-Medieval date. Description: Tripartite design with trefoil or scalloped shape designs on the ends. Each element is divided by two side knops at each side. Side knops have been worn and are now facing in slightly. Back is undecorated but has two integral facing prongs facing inwards. Mottled brown in colour with patches of darker green. Measurements: Length: 21.60 Width: 12.25 Height: 11.52 Thickness: 1.82 Discussion: Double pointed prongs have been suggested as horse-harness mounts (1 Noel Hume 1974)
Created on: Monday 8th January 2018
Last updated: Thursday 11th January 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 10
Search server index: asgard

You are viewing records: 1 - 10.

Search statistics

  • Total quantity: 10
  • Mean quantity: 1.000
  • Maximum: 1

Filter your search

County of origin

Institution

1 - 10 of 10 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.