Record ID: DENO-BF065C
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation
A complete copper-alloy sesterius of Trajan (AD 98-117), dating to the period AD 115-116 (Reece Period 5). SENATVS POPVLVSQVE ROMANVS reverse type depicting Felicitas standing facing, head left, holding caduceus and cornucopiae. Mint of Rome. RIC II, 673.
Created on: Friday 15th September 2017
Last updated: Monday 11th December 2017
Spatial data recorded.

Record ID: DENO-BE56B6
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
An incomplete cast silver or tinned copper alloy post-medieval (AD c.1600-c.1700) button, missing its loop. The button is hemispherical and has a flat, slightly flared base. There are two small knops on the base where the loop would have extended from. The domed face is decorated with two concentric circles, one at the edge and one at the centre, and a repeated curvileaner pattern of four pairs of conjoined symmetrical spirals, each divided by a vertical line, within the annulus. The interior of the top circle is decorated with a flower design, consisting of a central pellet and four …
Created on: Friday 15th September 2017
Last updated: Wednesday 31st October 2018
Spatial data recorded. This findspot is known as 'Perlethorpe', grid reference and parish protected.

Record ID: DENO-BDE8E9
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A complete cast lead-alloy post-medieval (AD c.1500-c.1800) unifaced token. The token is decorated on the upper face with a zoomorphic design of a turtle. The reverse is undecroated. The object has a greyish-brown patina. Overall the object measures 12.6mm in diameter and weighs 2.07g. Powell Type 19.
Created on: Friday 15th September 2017
Last updated: Thursday 7th December 2017
Spatial data recorded.

Record ID: DENO-BB8748
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation
A complete copper-alloy Roman radiate or nummus of an uncertain ruler, dating to the period AD 260-402. Uncertain reverse type. Uncertain mint.
Created on: Friday 15th September 2017
Last updated: Thursday 7th December 2017
Spatial data recorded.

Record ID: DENO-BB30BE
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation
A complete copper-alloy Roman nummus of the House of Constantine, dating to the period AD 330-361. Uncertain reverse type. Uncertain mint. Obverse brockage; the reverse is a negative impression of an emperor's bust.
Created on: Friday 15th September 2017
Last updated: Thursday 7th December 2017
Spatial data recorded.

Record ID: DENO-BADF83
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation
A complete copper-alloy contemporary copy (barbarous radiate) of a Roman radiate of an uncertain emperor, dating to the period AD 275-285 (Reece Period 14). Uncertain reverse type depicting a standing figure. Uncertain mint.
Created on: Friday 15th September 2017
Last updated: Thursday 7th December 2017
Spatial data recorded.

Record ID: DENO-BA6BA3
Object type: STRAP END
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A complete cast copper-alloy medieval (AD c.1350-c.1400) strap end with a cast front plate and sheet back plate. The strap end is sub-triangular when laid flat and semi-circular in cross-section. The cast front plate consists of a trapezoidal body and a sub-conical knop, divided by a narrowed collar. The knop is decorated with two symmetrical grooves and may have been shaped as a human head, though the design has worn away. On the reverse the back plate has been fixed to the front plate by two copper-alloy rivets, one at each end, though one end has broken away from the rivet. The obj…
Created on: Friday 15th September 2017
Last updated: Thursday 7th December 2017
Spatial data recorded.

Record ID: DENO-16662C
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Derbyshire
Workflow stage: Awaiting validation
An incomplete copper-alloy post-medieval two piece shoe buckle (AD c. 1660 - c. 1720), missing its separate spindle. The buckle is arched in profile. The object is undecorated and has a green patina. Overall the object measures 47.6mm long, 24.4mm wide and 12.9 mm thick (the frame itself has a maximum thickness of 4.7 mm). It weighs 7.15g. cf. Whitehead, R. (1996) p. 98 - 103.
Created on: Thursday 7th September 2017
Last updated: Wednesday 18th October 2017
Spatial data recorded.

Record ID: DENO-14A53F
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Derbyshire
Workflow stage: Awaiting validation
A cast lead unidentified object. The object consists of a sub-trapezoidal slab decorated with a possible shell or shield shape on the upper face. The upper face is marked with around ten small, circular indentations and roughly three small, uneven lumps. The reverse is rectangular when laid flat and undecorated except for a small round hole near the centre which may have been used to mount the object. There are two projections, one on at the end of each long side of the object. The object has the appearance of having been flattened. It is possible that it had an opening at one end and…
Created on: Thursday 7th September 2017
Last updated: Friday 18th May 2018
Spatial data recorded.

Record ID: DENO-132DFB
Object type: CANDLE SNUFFER
Broad period: POST MEDIEVAL
County: Derbyshire
Workflow stage: Awaiting validation
An incomplete cast copper-allloy post-medieval (AD c.1650-c.1775) candle snuffer or wick trimmer, missing most of its handles. The object is similar in shape to a pair of scissors. The object consists of two plates connected by a hinge mechanism. Projecting from one of plates is an open box. A flat plate forming a cover for it projects from the other hinged plate. On the opposite side of the object is a roughly cylindrical projection with an expanded, rounded end. The object tapers towards one end, while at the other end are a pair of oval handles which are now broken.The hinge is cov…
Created on: Thursday 7th September 2017
Last updated: Friday 18th May 2018
Spatial data recorded.

Record ID: DENO-1267AE
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Derbyshire
Workflow stage: Awaiting validation
An incomplete cast copper-alloy post-medieval (AD c.1600-c.1720) double-loop symmetrical buckle. The buckle consists of two D-shaped loops divided by a narrowed strap bar, which the pin is wrapped around. On each end the strap bar extends past the frame and terminates in a rounded knop. On either side the curve of the frame is decorated with a fleur-de-lis. The object is damaged: on the right-hand side of the strap bar, the frame has seperated from the strap bar at the lower end and is twisted upwards at a roughly ninety-degree angle to the buckle. Overall the object measures 34.7mm l…
Created on: Thursday 7th September 2017
Last updated: Friday 18th May 2018
Spatial data recorded.

Record ID: DENO-11C661
Object type: BUCKLE
Broad period: MODERN
County: Derbyshire
Workflow stage: Awaiting validation
A copper alloy post-medieval to modern harness buckle of 19th to 20th century date. The buckle consists of a larger, D-shaped loop and a smaller, offset rectangular loop. The frame of the larger loop is D-shaped in cross-section and is divded by a thick strap bar, rectangular in cross-section. The larger loop is irregular, the frame narrowing then flaring outwards again at two points. The tongue bar projects outwards from the frame, creatind a rounded knop on each end. Both faces are undecorated. The object measures 31.1mm long and 38mm wide. It weighs 8.48g. This object was previo…
Created on: Thursday 7th September 2017
Last updated: Monday 22nd October 2018
Spatial data recorded.

Record ID: DENO-115AC8
Object type: CANDLE HOLDER
Broad period: MEDIEVAL
County: Derbyshire
Workflow stage: Awaiting validation
An incomplete copper alloy medieval to post-medieval (AD c.1450-1550) candle holder, missing its hoop. The holder is sub-hexagonal in cross section and each face is sub-trapezoidal in profile, tapering inwards from a raised collar at the base to a raised, rounded rim along the top edge. The collar is decorated with a narrow oval indentation on each face and terminates in old breaks along the bottom edge. On two of the hexagonal sides, at opposite ends of the holder, is a rectangular slot stretching from the rim to about a quater of a way down the face, and a circular perforation below…
Created on: Thursday 7th September 2017
Last updated: Friday 18th May 2018
Spatial data recorded.

Record ID: DENO-1C2EF5
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Derbyshire
Workflow stage: Awaiting validation
A cast copper-alloy post-medieval (AD c.1570-c.1700) double loop trapezoidal buckle. On the top side the strap bar extends past the frame, and on each of the vertical sections the frame tapers outwards at the centre. The strap bar is heavily corroded and one side of the reverse of the strap bar is encrusted with rust. Overall the object measures 43.5mm long and 33.4mm wide.
Created on: Monday 14th August 2017
Last updated: Friday 4th May 2018
Spatial data recorded.

Record ID: DENO-1BF10A
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Derbyshire
Workflow stage: Awaiting validation
A complete cast copper-alloy post-medieval two piece trapezoidal shoe or knee buckle, dating to the period AD c.1660-c.1720. The outer frame is moulded into a floral pattern, which when laid flat resembles four rounded knops each connected by a sine wave with two parabola. The strap bar projects through the outer frame, creating two knops at either end. On one side of the strap bar the pin rests on the edge of the frame, while on the other the plate tapers downwards and terminates in an old break. The pin is heavily corroded and the plate is encrusted with rust. The small size of the …
Created on: Monday 14th August 2017
Last updated: Friday 4th May 2018
Spatial data recorded.

Record ID: DENO-1B21B4
Object type: BUCKLE
Broad period: MEDIEVAL
County: Derbyshire
Workflow stage: Awaiting validation
A complete cast copper-alloy medieval (AD c.1350-c.1450) asymmetrical double loop sub-oval buckle with a seperate strap and tongue bar. The buckle consists of a larger, D-shaped loop and a smaller, offset rectangular loop. The frame of the larger loop is D-shaped in cross-section and is divded by a thick strap bar, rectangular in cross-section. The small loop has a lower frame, so on the upper face the juncture with the strap bar is visible. The larger loop is irregular, the frame narrowing then flaring outwards again at two points. Both faces are undecorated. The object measures 30.7…
Created on: Monday 14th August 2017
Last updated: Friday 18th May 2018
Spatial data recorded.

Record ID: DENO-1A487C
Object type: BROOCH
Broad period: ROMAN
County: Derbyshire
Workflow stage: Published
An incomplete cast copper-alloy Roman Polden Hill bow brooch (AD c.55-c.100), missing its pin. The brooch has two semi-cylindrical wings. The wings are connected to the stem by a conical juncture. On the reverse of the wings is a conical mound, semi-circular in cross-section, to hold the hinge mechanism. A small, pointed stump protrudes from the hinge, terminating in an old break from where the pin would have extended. On the top of the head, roughly parrallel to the hinge, is a pointed tip terminating in an old break from where the suspension loop would have extended. The stem is sub…
Created on: Monday 14th August 2017
Last updated: Friday 13th July 2018
Spatial data recorded.

Record ID: DENO-1892C7
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Derbyshire
Workflow stage: Awaiting validation
A complete cast copper-alloy post-medieval (AD c.1500-c.1630) double-looped buckle with an integral cast suspension loop. The loop is sub-oval when laid flat and sub-triangular in cross-section with bevelled edges. The loop is divided by a narrowed strap bar, hexagonal in cross-section. The suspension loop extends from the top edge of the frame at a 90-degree angle to the main loop. The object measures 53mm long, 38.4mm wide and 4.9mm thick (at the suspension loop). Similar objects on the database include LVPL-9D1A7E and WILT-00806D, in which it is stated: 'this is a specialised ty…
Created on: Monday 14th August 2017
Last updated: Friday 18th May 2018
Spatial data recorded.

Record ID: DENO-17806A
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Rotherham
Workflow stage: Awaiting validation
A complete cast copper-alloy post-medieval finger ring (AD c. 1850 - c. 2000). The ring has six rectangular sections each divided by a vertical groove and decorated with a repeated floral pattern of a larger flower curved diagonally upwards and a smaller flower on a stem curved downwards, creating a circular effect. A corner of one section is bent inwards slightly, creating a small, pointed lip. The internal surface is undercorated except for a stamp which bears the initials 'W M N C'. Finger rings with these initials are recorded on the UKDFD (http://www.ukdfd.co.uk/ukdfddata/showrec…
Created on: Monday 14th August 2017
Last updated: Monday 6th November 2017
Spatial data recorded.

Record ID: DENO-16F56E
Object type: WATCH
Broad period: POST MEDIEVAL
County: Rotherham
Workflow stage: Awaiting validation
An incomplete cast copper-alloy post-medieval watch winder in the form of a fob seal or pipe tamper (ADc.1850-c.1900). The object consists of a loop with a lug protruding from either end, an incomplete winding key extending from the top at a 40-degree angle and an oval pipe tamper or fob seal attachment extending from the lower edge. The loop is asymmetrically pentagonal in cross-section and has a narrow top edge flaring outwards to a wider lower edge. The interior edges are bevelled and both outer faces are defined by a groove running parallel to the loop. The winding key is conical,…
Created on: Monday 14th August 2017
Last updated: Monday 6th November 2017
Spatial data recorded.