Back to simple search | Back to advanced search

    You searched for:

    • Created by: Walter (Jo) Ahmet
    • Show this many records per page: 40

  • Thumbnail image of KENT-396D78

Record ID: KENT-396D78
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast lead alloy probable palm guard from the Post-Medieval period dating to c.AD 1500-1800. Description: The object is ovoid and D-shaped in cross-section with a s slight amount of dishing on the 'flat' side. It is heavily marked on both surfaces and remains rough.. It is a mottled dark off-whire colour on both sides. Dimensions: Length 43.75mm, width 30.93mm, thickness 9.8mm and weight 74.86g. Discussion: Palm guards were for use by a leather worker or sail maker to protect the palm whilst stitching and a large number have been reported tot he PAS see similar: KENT-6E794…
Created on: Friday 15th June 2018
Last updated: Friday 15th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-39148F

Record ID: KENT-39148F
Object type: MUSKET BALL
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A lead musket ball dating to the post-medieval period c.17th-19th centuries. Description: The musket ball is spherecal and appears to have a sprue scar remaining as well as distinct 'flash' visible along the mould line. Likely this was caused by the two mould halves having been poorly seated. Normally lost through bumping in transport or through use, here it is intact, suggesting the bullet was found close to its point of manufacture and was never fired. Measurements: 16.68mm in diameter and 22.3g in weight Discussion: This musket ball likely comes from a musket with a bore similar …
Created on: Friday 15th June 2018
Last updated: Friday 15th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-24F14F

Record ID: KENT-24F14F
Object type: COIN
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A slightly worn silver Post-medieval halfgroat of Elizabeth I (1558-1603), (North's) third issue (1583-1603), Tower of London mint, mintmark possibly escallop dating to 1584-87, North (1991) no. 2016. Measurements: 17.25mm in diameter, 0.56mm thick and 1.02g in weight
Created on: Thursday 14th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-24C68A

Record ID: KENT-24C68A
Object type: JETTON
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A heavily worn and abraded copper-alloy Nuremburg jetton of Rose and Orb type, dating to the period c.1540 - 1620 AD. Description: Obverse: Alternating crowns and lis with central rose. Legend: Illegible. Reverse: Imperial Orb within tressure of three arches. The inscription is illegible. The jetton is a brown colour with a light green patina covering most of it. Dimensions: Diameter 19.4mm, thickness 0.61mm and weight 0.59g.
Created on: Thursday 14th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-248A82

Record ID: KENT-248A82
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A complete but fragmented cast copper-alloy and iron shoe or knee buckle dating to the Post-Medieval period (c. AD 1660-1720). Description: The buckle consists of a slightly convex sub-trapezoidal symmetrical frame with flat expanded outer edges. The top and bottom edges of the frame taper inwards and consist of a moulded spherical spindle housing with scrolls either side which extend to the outer edges. Each end has a indent for the pin to sit on, one end has a blob of iron corrosion from the now missing pin. The underside of the buckle frame is plain and flat except for the spherica…
Created on: Thursday 14th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-24604C

Record ID: KENT-24604C
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A worn and abraded uninscribed early-medieval silver sceat of series U likely type 23d, Abramason (2012) no. 45.50. BM 747 & 742. Branch with berries above bird reverse type, minted c.710-735. Measurements: 12.38mm in diameter, 1.6mm thick and 1g in weight.
Created on: Thursday 14th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-24332D

Record ID: KENT-24332D
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A near complete cast gilt copper-alloy small Kentish square-headed brooch of Early-Medieval date c. 500-575. Description: The brooch has a small square head with a central upright running bar panel, within double border cast in relief.er. There is a slight flat flange running around the outside of the head. The bow is low and formed of a double plain panel with raised edges and a central ridge. The foot is expanded tapering in outline towards the terminal forming a diamond shape with a central lozenge-shaped relief enclosing a raised pellet. In the upper angles of the foot-plate are r…
Created on: Thursday 14th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-23F6B5

Record ID: KENT-23F6B5
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Medieval copper-alloy swivel strap fitting c.AD 1100-1500. Description: This object survives as one of two linked rings. The remaing loop is roughly D-shaped, with small decorative 'wings' protruding from the top of the fitting. The tip of the strap fitting features a hole which a ball shaped lug from the second loop would have fitted into, but this has been lost, likely in antiquity. The fitting is a motled dark-green in colour. Measurements: Height 20.48mm, width 22.53, thickness 7.1mm and weight 4.07. Discussion: This swivel strap fitting is of an ubiquitous type se…
Created on: Thursday 14th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-23B513

Record ID: KENT-23B513
Object type: BUCKLE
Broad period: MEDIEVAL
County: Medway
Workflow stage: Awaiting validation Find awaiting validation
A cast pewter or high tin/lead copper-alloy incomplete single-loop D-shaped buckle with narrowed, offset strap bars and buckle plate dating to c.1250-1500 Description: The buckle frame is D-shaped, flat and lacks a notch for the pin. The strap bar is narrower than the buckle frame and offset. the buckle frame lacks a pin or buckle plate. It has a a dark grey patina with some patches of white possibly indicating that it is pewter or high tin/lead copper-alloy. Measurements: 14.71mm wide, 10.81mm long, 2.24mm thick and 1.25g in weight. Description: This type of buckle is frequently re…
Created on: Thursday 14th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-238683

Record ID: KENT-238683
Object type: MOUNT
Broad period: MEDIEVAL
County: Medway
Workflow stage: Awaiting validation Find awaiting validation
A complete cast, copper alloy bar mount dating to the Medieval period (AD c.1350 - ADc.1450). Description: The mount has two terminal lobes flanking a convex central boss. It has a semi-circular cross-section with four beaded ridges formed by grooving on the central lobe. It has two rivet holes, each with the remains of copper-alloy rivets. The central boss is decorated with parallel incised lines. A small copper rivet remain as stubs in both of the rivet holes. Measurements: 21.56mm long, 8.09mm wide, 4.73mm thick and 1.82g in weight. Discussion: Relatively common find on the PAS d…
Created on: Thursday 14th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-23613D

Record ID: KENT-23613D
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Medway
Workflow stage: Awaiting validation Find awaiting validation
A complete cast post-Medieval copper-alloy mount (c. 1600-c. 1700). Description: The mount is symmetrical in plan, lobed at each end with a transverse ridge at the centre. It is flat at the rear excepting the two integral tapering spikes, one at each end. The spikes are rectangular in cross-section and are bent out of shape. This mount has a dark brown patina Measurements: 24.09mm long, 17.35mm thick (including shanks, 3.54mm thick without), 7.5mm wide and 3.52g in weight. Discussion: A number of similar mounts have been published (Read 2001: 28, fig. 21, ref: 310), which are dated …
Created on: Thursday 14th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-1A19A5

Record ID: KENT-1A19A5
Object type: BROOCH
Broad period: ROMAN
County: Medway
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy Roman Colchester-derivative brooch of double-pierced lug type, dating 43-100 AD. Description: The humped bow has a raised ridge running along its' centre and an undecorated flat underside. The brooch foot and catch plate is missing entirely, this part of the brooch having broken off in antiquity as the break is patinated and worn. The wings are shallow crescents in cross section and holds the intact spring for the now mostly missing pin which remains only as a stub. The axis bar remains in situ through the lug, although distorted and is still attached to the…
Created on: Thursday 14th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-19DABF

Record ID: KENT-19DABF
Object type: COIN
Broad period: ROMAN
County: Medway
Workflow stage: Awaiting validation Find awaiting validation
A worn and abraded copper-alloy Roman nummus (AE3) probably of the House of Valentinian (AD 364-378), likely of Valentinian I (AD 364-375), Valens (AD 364 - AD378) or Gratian (AD 367 - AD 383). SECVRITAS REI PVBLICAE reverse, Victory advancing left, holding wreath and palm. Minted between 364-378, uncertain mint, mintmark illegible.Reece Period 19. Measurements: 16.48mm in diameter, 1.2mm thick and 1.48g in weight.
Created on: Thursday 14th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-199138

Record ID: KENT-199138
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy button of Post-Medieval date, c.AD 1600 - 1800. Description: The button is discoidal with a flat section. The front surface is decorated with an incised cross decorating the upper surface in each quadrant has a hatched triangle in it. The edge is formed from cut frilled decoration. A circular shank projects centrally from the reverse which is folded over to form a suspension loop. The button is patinated varied shades of green. Measurements: 31.25mm in diameter, 9.79mm thick including the shank (1.9mm thick) and 7.84g in weight.
Created on: Thursday 14th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-191F71

Record ID: KENT-191F71
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy medieval harness pendant, c. 1150-1300 Description: The pendant is made from a hammered out cast block of copper-alloy with a suspension loop at its pinnacle. The suspension loop is formed from a pierced knop perpendicular to the body of the pendant. The outer/upper surface has no visible decoration save for a tiny amount of gilding just under the suspension loop. The pendant has a mottled mid orangey brown colour with some patches of speckled green typical of patinated copper-alloy, save for the small spec of gold gilding Measurements: 31.75mm long, 36.42mm wide,…
Created on: Wednesday 13th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-18B1C9

Record ID: KENT-18B1C9
Object type: JETTON
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A partially worn Post-Medieval copper-alloy jetton of issued at Nuremberg by Hanns Schultes III, 1608-1612. Rose and orb type, '+GLICK KVMPT VON GOT IST WAR', (translated as: Truly, Happiness comes from God.) quatrefoil stops and initial marks. As Mitchiner (1988) no. 1405, but different stops as seen on HAMP-A5CBA8, SUR-3C85A4 and CORN-A4D618. One side of the jetton is heavily worn while the other remains clear. Measurements: 22.08mm in diameter, 0.52mm thick and 0.82g in weight.
Created on: Wednesday 13th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-185669

Record ID: KENT-185669
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A worn lead unifaced token of the Post-Medieval to Early Modern period, dating to AD1500 - AD 1850. Description: The token is roughly circular and uniface (with decoration on one side). The upper face has the initials 'JH' in alpha style in relief. The token is grey and with some patches of off white. Measurements: 27.25mm in diameter, 3.1mm thick and 13.99g in weight. Discussion: Lead tokens had a wide variety of potential uses such as tallies, gaming pieces, tickets, weights, etc. and are believed to have been locally produced; they are therefore difficult to date precisely. The …
Created on: Wednesday 13th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-FFF0D1

Record ID: KENT-FFF0D1
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Published Find published
An abraded copper-alloy Roman dupondius of Antoninus Pius (AD 138-161), probably dating to the period AD 140-161 (Reece period 7). FELICI[TAS AVG], S C reverse type depicting Felicitas standing left, possibly holding capricorn and caduceus? Mint of Rome. Cf. RIC III nos. 659, 800. Measurements: 26.52mm in diameter, 3.23mm thick and 11.15g in weight.
Created on: Tuesday 12th June 2018
Last updated: Wednesday 13th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-FFCC96

Record ID: KENT-FFCC96
Object type: COIN
Broad period: IRON AGE
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Iron Age (c.115/110-105/100 BC) potin cast bronze unit of the Cantiaci. 'Kent Secondary' or flatline type Holman (2016) type B2/2-1a, No concocrdance with known ABC, VA or Allen types. The coin retains substantial casting sprue. Measurements: 20.56mm long (including flash), 17.67mm wide (intended diameter), 1.68mm thick and 2.13g in weight.
Created on: Tuesday 12th June 2018
Last updated: Wednesday 13th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-FF6C30

Record ID: KENT-FF6C30
Object type: COIN
Broad period: ROMAN
County: Kent
Workflow stage: Published Find published
A heavily abraded copper-alloy Roman nummus of the House of Valentinian, dating to the period AD 364-378 (Reece period 19). [SECVR]ITAS-[REI PVBLICAE] reverse type depicting Victory advancing left holding wreath and palm. Uncertain mint, probably Arles or Lyon. Measurements: 16.38mm in diameter, 1.28mm thick and 1.18g in weight.
Created on: Tuesday 12th June 2018
Last updated: Wednesday 13th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-FEE1D3

Record ID: KENT-FEE1D3
Object type: COIN
Broad period: ROMAN
County: Medway
Workflow stage: Awaiting validation Find awaiting validation
A highly worn and abraded copper-alloy radiate, probably a contemporary copy (Barberous Radiate), Probably copying a coin of the Gallic Emperors Victorinus (269-271). (Reece Period 14). Measurements: 10.65mm in diameter, 0.78mm thick and 0.32g in weight.
Created on: Tuesday 12th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-FEC28A

Record ID: KENT-FEC28A
Object type: COIN
Broad period: ROMAN
County: Medway
Workflow stage: Awaiting validation Find awaiting validation
A highly worn and corroded copper-alloy probablye contemproary copy of a Roman nummus. Mint, emepror and type illegible, AD 296-402. Measurements: 11.88mm in diameter, 2.33mm thick and 1.19g in weight.
Created on: Tuesday 12th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-FE8A82

Record ID: KENT-FE8A82
Object type: COIN
Broad period: ROMAN
County: Medway
Workflow stage: Awaiting validation Find awaiting validation
A worn Roman copper-alloy Nummus likely a contemporary copy of a coin of the House of Constantine in the name of Constantine II (317-340), Constans ( AD337-350) or Constantius II (AD 324-361), all as Caeser. 'GLORIA EXERCITVS' reverse type depicting Two soldiers standing either side of a standard. Minted AD 335-341. Mintmark illegible. Reece period 17. Measurements: 12.68mm in diameter, 1.31mm thick and 0.62g in weight.
Created on: Tuesday 12th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-FE5869

Record ID: KENT-FE5869
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A worn and lightly abraded lead-alloy unifaced token of the Post-Medieval period, dating to AD1500 - AD 1850. Description: The token is uniface and circular. Has a quartered design forming a cross and with pellets in each angle, but rather haphazardly. The token is roughly flat and is a grey colour. The token is braded and one quarter is bent slightly down. Measurements: 16.37mm in diameter, 2.33mm thick and 1.9g in weight. Discussion: Lead tokens had a wide variety of potential uses such as tallies, gaming pieces, tickets, weights, etc. and are believed to have been locally produce…
Created on: Tuesday 12th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-FE3C87

Record ID: KENT-FE3C87
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A cast incomplete, worn and fragmented gilt copper-alloy acorn shaped mount of 17th century date. Description: The mount is roughly in the shape of the acorn with the cap having the leaf or stem detail has snapped away and the same for the bottom of the nut. The front is slightly convex and the back is hollow/concave with tow integral drawn attachment lugs. Both lugs remain albeing heavily worn. The mount has snapped between the cup and the nut. The surface of the mount is heavily pitted and corroded. THe mount is mostly a mid to light green colour with some brown mottling. A small am…
Created on: Tuesday 12th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-EA8294

Record ID: KENT-EA8294
Object type: COIN
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete and worn plated silver over copper-core post-Medieval groat of Edward VI (1547-1553) in the name of Henry VIII. Likely minted at Canterbury between c.1547-c.1551, North (1991) no.1875. Coin is heavily abraded and worn and in places the silver plating has come away to show the poor quality copper-alloy core. Measurements: 25.33mm in diameter, 0.62mm thick and 1.46g in weight.
Created on: Monday 11th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-EA5360

Record ID: KENT-EA5360
Object type: COIN
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A plated silver post-Medieval groat of Edward VI (1547-1553) in the name of Henry VIII. Irish issue from the Dublin mint, Spink (2003) No. 6488 with half right bust of the late 'Tower' issues of Henry VIII, dating 1547-c.1550. Coin is bent and mishaped, in places the silver plating has come away to show the poor quality copper-alloy core. Measurements: 25.23mm in diameter, 0.68mm thick (not including warping) and 2.08g in weight.
Created on: Monday 11th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-E9C9F4

Record ID: KENT-E9C9F4
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A heavily worn and clipped Medieval silver penny of Edward III (1327-1377), probably Fourth coinage, pre-treaty period (1351-1361), Series E (1354-1355) or Series G (1356-1361). Minted at London. Uncertain initial mark and small lettering. Measurements: 16.68mm diameter, 0.62mm thick and 0.8g in weight.
Created on: Monday 11th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-E98321

Record ID: KENT-E98321
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A partially worn Medieval silver penny of Edward I (1272-1307). Minted at London during the first half of 1280, Class 2b, North, 1991. no.1015. Die error, note 'EDV' in obverse legend. Measurements: 19.42mm diameter, 0.74mm thick and 1.44g in weight.
Created on: Monday 11th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-E92D59

Record ID: KENT-E92D59
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cut silver medieval voided long-cross cut halfpenny of Henry III (1216-1272). Probably Class 5c1 North (1994) no.993. minted c. 1250-1256 at London by Ricard or Nicole. Measurements:11.61mm in length, 9.07mm wide, 0.76mm thick (original flan thickness, actual thickness due to warping 1.9mm) and 0.73g in weight.
Created on: Monday 11th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-E8E85B

Record ID: KENT-E8E85B
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A worn and warped silver medieval voided long-cross cut halfpenny of Henry III (1216-1272). Class 4a, North (1994) no. 989 minted c. 1250-1251 at Canterbuy, moneyer uncertain. Measurements: 16.68mm in length (original diameter), 8.7mm wide, 0.76mm thick (oriignal flan thickness not including folding) and 0.73g in weight.
Created on: Monday 11th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-E894CC

Record ID: KENT-E894CC
Object type: COIN
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A slightly worn and abraded double struck medieval silver halfpenny of Edward III (1327 - 1377), Minted at London. Third 'Florin' coinage (1344-1351), Withers (2002) type 7i, North (1991), no.1131. Measurements: 17.6mm in diameter, 0.74mm thick (not including bent edges) and 0.71g in weight.
Created on: Monday 11th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-E7F787

Record ID: KENT-E7F787
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A worn lead unifaced token of the Post-Medieval to Early Modern period, dating to AD1500 - AD 1850. Description: The token is roughly circular and uniface (with decoration on one side). The upper face has the intiials '' in alpha style in relief. The token is grey and with some patches of off white. Measurements: 17.72mm in diameter, 2.31mm thick and 4.07g in weight. Discussion: Lead tokens had a wide variety of potential uses such as tallies, gaming pieces, tickets, weights, etc. and are believed to have been locally produced; they are therefore difficult to date precisely. The Po…
Created on: Monday 11th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-E7BDAF

Record ID: KENT-E7BDAF
Object type: BUCKLE
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Medieval copper-alloy single looped buckle with a small integral plate, of probable late medieval date, c. AD 1250-1400. Description: The buckle has a rectangular frame, with a flat rectangular cross section and a centrally positioned tongue shaped knop with central groove on the outer edge of the frame, forming a lip for the pin. On the opposite side of the frame expands into a short plate snapped just past a rivet hole with a rivet in situ. There is an empty hole between the rivet and the frame where the now missing pin would have been placed. The plate has incised dec…
Created on: Monday 11th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-E759EB

Record ID: KENT-E759EB
Object type: BUCKLE
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A cast and sheet metal Medieval, gilt copper-alloy rectangular single0loop buckle with plate. c.14th century in date. Description: The buckle frame is rectangular with an expanded outer edge, with three transverse incised grooves. The sides have two low raised decorative ridges on the outer edge. The sheet metal plate has is plain save for a small band of incised decoration at the opposite end to the buckle formed from two parallel lines of punched dots with a wavy line formed from punched dots between the two. There is a rivet hole, missing its rivet just prior to the plate decoratio…
Created on: Monday 11th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-E70ABD

Record ID: KENT-E70ABD
Object type: BUCKLE
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Medieval or Post-Medieval cast pewter double loop buckle, also known as a spectacle buckle. Description: The frame has two oval loops which are convex in cross-section. One end has a notch where the pin rests. The ends of each buckle are pointed. The pin which remains folded around the central strap bar. The frame is bent upwards at each end. The buckle frame and the pin are patinated a dark grey with some areas of lighter grey and grey green. Measurements: 47.3mm long, 34mm wide, 3.3mm thick. 11.89g in weight Discussion: Many buckles of this type exhibit bending, often in a very …
Created on: Monday 11th June 2018
Last updated: Thursday 14th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-906386

Record ID: KENT-906386
Object type: BROOCH
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete medieval annular, copper alloy annular brooch, dating to the 13th or 14th century AD. Description: It is missing its pin which would have been restricted in an indent on the frame. There are six shallow collets arranged equidistantly around the frame, three retain a white paste, either from decoration or inlay paste and one has a hole in the bottom. The frame swells a little bit between the collets. The frame itself is bent a little out of its presumably original flat shape. The brooch is patinated a grey-green colour. Measurements: 24.08mm in diameter, 3.39mm thick (d…
Created on: Thursday 7th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-900C82

Record ID: KENT-900C82
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy, Roman hinged? Colchester derivative, Polden Hill type brooch, Description: The brooch is missing its pin and catchplate. The wings are broadly cylindrical but recessed at the rear. Each end appears to terminate with an end cap, which would indicate that this is a Polden type brooch. At the centre of the reverse is the stump of the pin made from a different copper alloy from the rest of the brooch. The wings appear to be solid but drilled with an iron pin for the hinge to pivot on. The bow has a slight depression down its length. The brooch is a dark grey-br…
Created on: Thursday 7th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-814599

Record ID: KENT-814599
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A complete Post Medieval copper alloy double-looped sub-annular buckle frame, dating c. 1650-1720). Description: The frame is oval with a straight central recessed strap bar, creating two D-shaped loops. The frame is undecorated on both faces and the reverse is bevelled on the interior edge. There is iron corrosion products on the strap bar, indicating that this buckle once had an iron pin, which is now missing. The frame itself is quite warped and no longer flat. It is also mottled mid orangey brown on the front with some green patches and the other way round on the back. Measureme…
Created on: Wednesday 6th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-8122ED

Record ID: KENT-8122ED
Object type: BUCKLE
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy medieval (c.1250-1400AD) D-shaped buckle with narrowed offset strap bar. Description: The buckle is small, with thin bars of which the strap bar is offset. At the opposite end of the frame the loop has a central groove flanked on each side by two smaller grooves and a protruding stub creating transverse ribbed decoration . The decoration wraps around the frame front to back. The buckle pin remains. in place and is formed from a piece of copper wire. The back of the buckle is flat with some evidence of filing/bevelling. The colour of the buckle is a dark grey…
Created on: Wednesday 6th June 2018
Last updated: Thursday 7th June 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 1,923
Search server index: objects

You are viewing records: 1 - 40.

Search statistics

  • Total quantity: 2,067
  • Mean quantity: 1.075
  • Maximum: 19

Filter your search

1 - 40 of 1,923 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.