Back to simple search | Back to advanced search

    You searched for:

    • Created by: Walter (Jo) Ahmet
    • Show this many records per page: 10

  • Thumbnail image of KENT-AE1EEF

Record ID: KENT-AE1EEF
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A near complete but worn and abraded flat lead non-heraldic personal seal matrix of Medieval date c.AD 1200-1350. Description: The matrix is flat and circular in plan and with an incomplete suspension loop at the top of the reverse side formed by a cast lug at the top of a raised ridge. The suspension loop is broken below its' suspension loop. there is two additional raised ribs radiating from the top of the central ridge. On the front is an engraved central eight pettled flower. This is surrounded by a legend which starts at twelve o'clock and runs retrograde (anti-clockwise) around …
Created on: Thursday 21st June 2018
Last updated: Thursday 21st June 2018
Spatial data recorded.


  • Thumbnail image of KENT-AD90CA

Record ID: KENT-AD90CA
Object type: HANDAXE
Broad period: PALAEOLITHIC
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete probable ovate flint handaxe of Lower Palaeolithic date (500,000 - 180,000 BC), Description: The handaxe is incomplete and has a heavily tumbled surface. It was produced via bifacial working with one face being almost entirely destroyed by damage leaving it rough and pitted. The point is rounded and one edge of the remaining face is incomplete also. The flint is the characteristic light brown-orangey 'toffee' colour with some brown to light brown iron staining typical of Palaeolithic flint finds Measurements:79.65mm long, 57.03mm wide, 20.21mm thick and 84.75g in weight.
Created on: Thursday 21st June 2018
Last updated: Thursday 21st June 2018
Spatial data recorded.


  • Thumbnail image of KENT-AD3AB6

Record ID: KENT-AD3AB6
Object type: POINT
Broad period: PALAEOLITHIC
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A possible Mousterian point of Middle Palaeolithic date. Description: The point is roughly triangle in plan and cross-section, with an apparently facetted but end although this is heavily worn. The point is formed by long flaked removals with retouch heavily obscured by patination and recortication but appears to be long scaled low angle retouch. The conchoidal rippling on the flaking is substantial on the dorsal face while the bulb and conchoidal rippling on the ventral side is very subtle, indicating mixed technique used in its production. The flint is heavily patinated white with b…
Created on: Thursday 21st June 2018
Last updated: Thursday 21st June 2018
Spatial data recorded.


  • Thumbnail image of KENT-ACE89D

Record ID: KENT-ACE89D
Object type: CORE
Broad period: MESOLITHIC
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A flint core of probable late Mesolithic date c.8000-4000BC. Description: The core is very roughly conical. The striking has left substantial conchoidal fractures, which indicates use of hard hammer technology. The removals appear to be quite small and vary in size and direction There is a concave side which may relate to an area of lower quality flint with inclusions and faults which may be why the core was abandoned. The flint is heavily mottled grey colour except for the patch of beige cortex. Measurements: 37.9mm high. 36.7mm wide, 34.99mm deep and 31.68g in weight.
Created on: Thursday 21st June 2018
Last updated: Thursday 21st June 2018
Spatial data recorded.


  • Thumbnail image of KENT-ACA4F3

Record ID: KENT-ACA4F3
Object type: BORER
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A flint borer likely of Neolithic to Bronze Age date. Description: The borer is sub-triangular in plan with three large and dressed striking platform. There is extensive short scaled low angle retouch along the mesal (sides) of the two dorsal faces, with striking coming in from multiple angles, primarily from the dorsal faces on the right side and from the ventral face on the left. The point appears to remain intact although may have been reworked.. The bulb of percussion and the conchoidal fractures are very pronounced which suggests hard hammer striking. The flint is heavily mottled…
Created on: Wednesday 20th June 2018
Last updated: Thursday 21st June 2018
Spatial data recorded.


  • Thumbnail image of KENT-AC21AF

Record ID: KENT-AC21AF
Object type: SCRAPER (TOOL)
Broad period: IRON AGE
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A flint scraper likely of late Bronze Age to Iron Age date. Description: The scraper is ovoid, with large sweeping rounded edges. The scraper is triangular in cross-section. The scraping edge is formed from irregular invasive semi-abrupt retouch at the proximal end (striking platform end), this changes towards the distal end to abrupt indicating blunting of the corner. The retouch is struck from the both faces. The dorsal side still has about a third of the mid brown cortex remaining. The ventral side has some working and a substantial teadrop shaped bulb of percussion and substantial…
Created on: Wednesday 20th June 2018
Last updated: Thursday 21st June 2018
Spatial data recorded.


  • Thumbnail image of KENT-ABB2EE

Record ID: KENT-ABB2EE
Object type: SCRAPER (TOOL)
Broad period: IRON AGE
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A flint scraper likely of late Bronze Age to Iron Age date. Description: The scraper is irregularly shaped, with a large sweeping rounded blade edge, a pointed butt and a slightly concave final edge opposite to the blade edge. The scraping edge is formed from irregular invasive semi-abrupt retouch. The reotuch is struck from the dorsal side. The dorsal side still has about a quarter of the mid brown cortex remaining. There is a some crushing on the concave edge through the cortex whcih may be to blunt this edge. The ventral side has no working a modest bulb of percussion and substanti…
Created on: Wednesday 20th June 2018
Last updated: Thursday 21st June 2018
Spatial data recorded.


  • Thumbnail image of KENT-AA1B15

Record ID: KENT-AA1B15
Object type: GUNFLINT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A complete knapped gunflint blank from which gunflints for flintlock muskets of Post-Medieval date, c.AD 1600 - 1900, could be produced Description: The flint is broadly rectangular in plan and resembles a stretched pillow shaped gunflint. with tapering sides and a trapezoidal cross-section. There is significant conchoidal rippling on the ventral side. The flint is dark grey with some mottled lighter areas. A probable accidental flake has been removed from the top edge. Measurements: 85.73mm long, 32.6mm wide, 11.22mm thick and 38.77g in weight. Discussion: This object very much res…
Created on: Wednesday 20th June 2018
Last updated: Thursday 21st June 2018
Spatial data recorded.


  • Thumbnail image of KENT-A63C14

Record ID: KENT-A63C14
Object type: SCRAPER (TOOL)
Broad period: MESOLITHIC
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete flint end scraper of probable Mesolithic date. Description: The scraper is incomplete and broken across its' body. The scraper remains sub-triangular in shape with a wide sweeping scraping edge. The break appears to be across a significant fault within the flint and may have happen during production. The edge is formed from short scaled semi-abrupt retouch. The rest of the flaking appears to be haphazard and the bulb of percussion is missing due to the break caused by the fault. All retouch and flaking is focused on the dorsal face, other features visible on the ventral …
Created on: Wednesday 20th June 2018
Last updated: Wednesday 20th June 2018
Spatial data recorded.


  • Thumbnail image of KENT-A5F9A1

Record ID: KENT-A5F9A1
Object type: DEBITAGE
Broad period: UNKNOWN
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A single flint probable waste flake (debitage) of uncertain possible prehistoric date. Description: The flake is irregularly shaped but with two long edges and two short edges. It has extensive conchoidal rippling and pronounced bulb of percussion indicating production via hard hammer technology. This flake is likely from the production of a blade or similar object. Measurements: 24.25mm long, 15.41mm wide, 5.98mm thick and 2.34g in weight.
Created on: Wednesday 20th June 2018
Last updated: Wednesday 20th June 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 1,951
Search server index: valhalla

You are viewing records: 1 - 10.

Search statistics

  • Total quantity: 2,096
  • Mean quantity: 1.074
  • Maximum: 19

Filter your search

1 - 10 of 1,951 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.