Back to simple search | Back to advanced search
You searched for:
Record ID: DEV-1A00A1
Object type: BROOCH
Broad period: ROMAN
County: Devon
Workflow stage: Published
A fragmentary copper-alloy Roman initial T-shaped brooch dating to AD 50-150, now just comprising the upper bow and head, the latter now broken.
One of the wings is seemingly intact, while the other is broken at its junction with the bow. On the reverse, the broken wing is also abraded revealing the channel for the axis bar; the pin, of course, is missing. The extant wing is broadly circular, though squared off at the top. Retained within it are the remains of a probably iron bar, as suggested by traces of iron corrosion product in a longitudinal groove …
Created on: Monday 27th March 2023
Last updated: Thursday 2nd November 2023
Spatial data recorded.
This findspot is known as 'Barnstaple area', grid reference and parish protected.
Record ID: DEV-D090E5
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete Roman cast copper-alloy brooch of unusual form (c. 1st to 3rd century). It consists of a long, thin trapezoidal plate connected by an angled section to the head, probably for a hinged pin. It is unclear to what extent the head survives; the brooch is broken at the start of a section that is expanded slightly from that from which it extends. It may have developed into a tubular head to retain an axis bar for a hinged pin; there are hints of a central pin slot. As noted, a small angled section connects this to the plate; it is set at an angle of just over 45 degrees.&n…
Created on: Wednesday 15th February 2023
Last updated: Wednesday 22nd March 2023
Spatial data recorded.
Record ID: DEV-10E72D
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation
An incomplete Iron Age La Tène III type/ Nauheim derivative brooch dating to the period c. AD 10-100 (Plouviez period E). While much of the brooch survives, the integral pin is missing, as is the catch-plate.
At the top of the bow is the head of the brooch. The head was probably made of four coils of circular cross-section, two either side of the bow, but the internal coil that would have developed into the bow has been lost to an old break. The coils on the other side of the bow may have been squashed flat. When viewed head uppermost, the first coil to the left of the pin and …
Created on: Monday 6th February 2023
Last updated: Monday 6th February 2023
Spatial data recorded.
Record ID: DEV-F1E330
Object type: BROOCH
Broad period: ROMAN
County: Devon
Workflow stage: Awaiting validation
An incomplete copper-alloy Roman developed T-shaped brooch (Colchester derivative) dating to c. AD 75-150. Much of the bow is missing. The wings are possibly broken through an original cylinder; nothing of the brooch apparatus survives. At the centre is a longitudinal slot, presumably to accommodate the expanded head of a hinged pin. The head of the bow arches back from centre of the wings before dropping downwards and tapering to the break. The bow is a sub oval in cross section at the old break. The head is decorated with double stepped low triangular moulding, now wor…
Created on: Tuesday 18th October 2022
Last updated: Wednesday 19th October 2022
Spatial data recorded.
Record ID: DEV-0D90F6
Object type: BROOCH
Broad period: MEDIEVAL
County: Devon
Workflow stage: Awaiting validation
A cast copper-alloy annular brooch of medieval date (c. 13th-14th century), now missing its pin, but otherwise complete. Its piriform (drop-shaped) frame is flat at the front and the outer edge has a small rebate (step down) around the periphery. Each side of the frame, on the front face, are three equally spaced collets; the tops of some are abraded. Two of the collets contain settings of a soft white paste, probably calcium carbonate. The setting in the central collet to one side, just below the pin hole, is composed of a harder and slightly shiny material that has a blue t…
Created on: Monday 8th August 2022
Last updated: Monday 8th August 2022
Spatial data recorded.
Record ID: DEV-6D331A
Object type: BROOCH
Broad period: ROMAN
County: Devon
Workflow stage: Awaiting validation
An elaborate copper-alloy Roman T-shaped bow brooch of probable 2nd-century AD date, incomplete insofar as it is missing its pin.
The brooch is robust, with both an elaborated head and bow. Traces of orange-brown corrosion product in the pin slot, at the end of the wings and at the catch-plate suggest that the missing pin was made of iron. The wings are broadly tubular, with a slightly squashed profile. The front the wings are decorated with blind-drilled holes, three either side of the bow, the outermost of which to each side have abraded through. Below the holes, traces of…
Created on: Thursday 7th July 2022
Last updated: Saturday 25th November 2023
Spatial data recorded.
Record ID: PAS-366BC7
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Dorset
Workflow stage: Published
An incomplete late early-medieval (late Anglo-Saxon) to medieval copper-alloy cloisonné enamelled disc brooch (late 10th - 11th century), of the Saunderton type (Weetch Type 20.A).
The brooch is constructed from a base-plate of copper alloy originally with seven equidistant rounded projections; three have been snapped off completely, with only four surviving, non consecutively. A circular copper-alloy collar has been soldered onto this base plate and set within the collar is the cloisonné enamel pattern. The pattern is marked out by copper alloy cells and comprises six conjoined …
Created on: Thursday 20th September 2018
Last updated: Wednesday 7th November 2018
Spatial data recorded.
This findspot is known as 'Gussage All Saints CP', grid reference and parish protected.
Record ID: PAS-8CC7FA
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
A complete copper-alloy Roman plate brooch of c. 2nd century AD date. The brooch is broadly circular, though slightly angular, with sides that tend towards being straight between four lobed knops located one at each cardinal point. The brooch is decorated with three concentric circular grooves, divided by circles of the same height as the circumference. Probable traces of enamel are apparent within the grooves, as with the lobed knops which are each recessed, but not enough survives to be able to reconstruct a colour scheme. Two of the knops have been abraded through externally.
…
Created on: Thursday 22nd October 2015
Last updated: Friday 5th February 2016
Spatial data recorded.
Record ID: PAS-8BCFF7
Object type: BROOCH
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A copper-alloy annular brooch of medieval date (c. 13th century AD). It has a circular, cable decorated (twisted) frame seemingly formed of one single rotation, and thus falls into Deevy's Class 3a for which a 12th- to 14th-century date has been suggested (Deevy 1998, 17). It has a broadly circular cross-section. Around a pin constriction a cast pin with collar below the loop, surviving in situ. It is circular in cross-section and tapers to a point. It has been bent to one side as a result of old damage. Both brooch and pin have corroded to the same light-green colour.
It measures …
Created on: Thursday 22nd October 2015
Last updated: Wednesday 3rd February 2016
Spatial data recorded.
Record ID: PAS-480EB9
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Published
A Roman copper-alloy Colchester derivative Polden Hill (flat wing ends type, Western Group) brooch (later 1st to mid-/late-2nd century AD). The brooch survives well, only having suffered some post-depositional damage and the loss of its pin. The head has curved wings with flat perforated end plates; one perforation has been broken through. The axis bar is missing although traces of corrosion product on the underside of the wings suggests that it might have been made of iron. There is a double transversely incised line at each terminal, with a groove beyond, followed by a second pair o…
Created on: Wednesday 18th February 2015
Last updated: Tuesday 4th October 2016
Spatial data recorded.
Record ID: PAS-4745B6
Object type: BROOCH
Broad period: IRON AGE
County: Oxfordshire
Workflow stage: Awaiting validation
A Late Iron Age/early Roman (AD20-80) copper-alloy Colchester two-piece brooch, incompletein so far as it is missing the elements of its catch-plate, and much of its pin. The wings are short, flat and rectangular. Behind the wings is a hook that curves upwards to retain the axis bar, and, above this, an integral hook curved back on itself to retain the chord. The spring mechanism survives intact, around its axis bar, the chord retained within the rearward hook. There are two coils to each side; on one side the innermost coil develops into the pin which has been truncated after only c.…
Created on: Wednesday 18th February 2015
Last updated: Thursday 19th February 2015
Spatial data recorded.
Record ID: PAS-1AE64C
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Published
A Roman copper-alloy Colchester derivative brooch with a double pierced lug spring attachment, incomplete in so far as it is missing part of its spring mechanism and pin, dating to the 1st centuryAD. The double pierced lug is situated behind the head as is characteristic of this type, with a cusping at the front between the perforated lobes. The sprung pin is missing, as is half of the chord and coils. The side of coils that survives has six twists. The chord is retained within a lug, as noted. The lug is narrowed compared to the head and features a decorative transverse groove above …
Created on: Monday 16th February 2015
Last updated: Tuesday 13th October 2015
Spatial data recorded.
Record ID: PAS-0CA7FC
Object type: BROOCH
Broad period: IRON AGE
County: Oxfordshire
Workflow stage: Published
An incomplete Late Iron Age/early Roman (AD20-80) copper-alloy Colchester one-piece brooch missing the majority of the catch-plate, the spring and pin. The wings are flat and rectangular; one significantly truncated, the other bent upwards at its end. Behind the wings is a hook that curves upwards to retain the axis bar, and, above this, an integral hook, now distorted and bent outwards, which would have retained the chord. No decoration is visible on the bow which tapers towards the tip. The bow has a sub-rectangular cross-section, with flat upper and lower surfaces and rounded sides…
Created on: Sunday 15th February 2015
Last updated: Tuesday 13th October 2015
Spatial data recorded.
Record ID: SOM-315832
Object type: BROOCH
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A complete octagonal cast copper-alloy annular brooch with central circular aperture of medieval date. The frame is flat and rectangular in cross-section with a pin constriction at the centre of one of the sides. A thick wire pin survives in situ. It is formed of a wire bent into a loop at one end and of rectangular cross-section. It measures 40.6 by 3.5 by 1.8mm. It has been bent downwards at its centre as a result of old damage. The frame has also been bent upwards at one corner in the past. The frame is c. 7.1mm wide and c. 2.0mm thick. It is decorated on its upper surface wit…
Created on: Friday 12th September 2014
Last updated: Wednesday 17th September 2014
Spatial data recorded.
This findspot is known as 'Somerton CP', grid reference and parish protected.
Record ID: SOM-30A1D6
Object type: BROOCH
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A complete cast copper-alloy annular brooch of medieval date. The frame is formed of a thick wire of circular cross-section which, contra the definiton of medieval brooches, has no current pin constriction. However, it has been broken as a result of old damage, possibly at a former constriction; the ends have been neatened and overlap each other by c. 4mm. The object otherwise has the module and delicacy of a brooch; it now has an internal diameter of c. 19.0mm. A pin of circular cross-section survives on the frame, its tip overhanging the edge of the frame, though with very shallow c…
Created on: Friday 12th September 2014
Last updated: Friday 12th September 2014
Spatial data recorded.
This findspot is known as 'Huish Episcopi CP', grid reference and parish protected.
Record ID: SOM-2451B2
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A fragmentary cast copper alloy T-shaped brooch of early Roman date. Present is part of the head and upper bow; the rest of the head, pin, lower bow, including leg and catch-plate, are missing. The head was formed of cylindrical wings with a slot that is slightly off centre; one of the wings has been lost beyond the head. Retained in the extant wing is the remnant of the copper-alloy axis bar for the former hinged pin, viewable within the slot. The surviving wing is decorated with a pair of transverse lines at the end on the upper surface. An integral headloop protrudes from the centr…
Created on: Wednesday 6th August 2014
Last updated: Wednesday 13th August 2014
Spatial data recorded.
This findspot is known as 'Near Wincanton', grid reference and parish protected.
Record ID: SOM-F9D5FA
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A fragmentary cast copper alloy developed T-shaped brooch of early Roman date. Present is the most of the head and upper bow; the pin, lower bow, including leg and catch-plate, are missing. The head is formed of cylindrical wings with a central slot. One of the wings is broken with only about half of the original wing surviving. Orange/brown corrosion product in the slot and on the lower surface of the bow below suggests that the axis bar for the hinged pin was made of iron. Both wings are decorated with a trio of grooves, thus creating a pair of ridges, at the end largely on the lowe…
Created on: Monday 4th August 2014
Last updated: Wednesday 6th August 2014
Spatial data recorded.
This findspot is known as 'Near Wincanton', grid reference and parish protected.
Record ID: SOM-F92DC6
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A fragmentary cast copper alloy T-shaped brooch of early Roman date. Present is the head, with broken pin, and upper bow; the lower bow, including leg and catch-plate, are missing. The head is formed of cylindrical wings with a central slot. The wings contain the copper-alloy axis bar for the hinged pin, viewable within the slot. The head of the copper-alloy pin, with spur, is still in the slot; only the beginnings of the rest of the pin survives in addition, bent to one side. Both wings are decorated with a trio of lines at the end on the upper surface. There is no evidence for a tab…
Created on: Monday 4th August 2014
Last updated: Monday 4th August 2014
Spatial data recorded.
This findspot is known as 'Near Wincanton', grid reference and parish protected.
Record ID: SOM-1A6D81
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Published
A cast copper-alloy zoomorphic Roman plate brooch in the form of a bird (duck), incomplete having suffered various abrasions and having lost its pin. The brooches has a flat body of triangular form with rounded corners. This is because the bird has its wings folded to the body. The pointed end of the triangular body is extended into an inverted triangular tail. One of the corners and centre of the tail are abraded such that it is difficult to identify whether there was a chain loop that protuded from the centre as with similar examples; there is no evidence of one. At the centre of th…
Created on: Wednesday 18th June 2014
Last updated: Tuesday 26th March 2019
Spatial data recorded.
This findspot is known as 'The Deverills', grid reference and parish protected.
Record ID: SOM-390654
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
The head and upper part of the bow of a Roman cast copper-alloy initial T-shaped brooch with hinged pin dating to c. AD 60-100. The lower part of the bow, foot and pin are missing to worn breaks. The brooch head has open-ended cylindrical wings containing an iron axis bar for the hinge. One wing has lost its upper half, possibly as a result of corrosion of the axis bar within. The complete wing is decorated with a double transverse ridge moulding towards its top with an incised line within. There is a large transverse slot through the centre of the underside of the head, between the w…
Created on: Wednesday 14th May 2014
Last updated: Thursday 21st August 2014
Spatial data recorded.
This findspot is known as 'Near Wincanton', grid reference and parish protected.
Records per page: 10 20 40 100
Sort your search by:
Which direction?
Total results available: 50
Search server index: asgard
You are viewing records: 1 - 20.
1 - 20 of 50 records.