Record ID: SOM-4AC795
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy Roman zoomorphic plate brooch in the shape of a rabbit shown in profile. The rabbit is depicted seated with compact, rounded body and proportionally small head. The fore and hind paws seem to be truncated, but would not have been that prominent to judge from comparanda. The eye is formed of a punch and a small ear extends behind the head. The body is corroded and pitted; it is pitting that seems visible rather than recesses for enamel found on similar brooches. The lower surface features a broken and abraded double pin lug at the centre of the rabbit's rear, and a a…
Created on: Friday 9th August 2013
Last updated: Wednesday 4th September 2013
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.

Record ID: SOM-8C84C7
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A Roman copper-alloy lower part of the bow and catch-plate of a brooch. The upper part of the bow, the head of the brooch and pin are missing due to an old patinated break. In cross-section, the bow is rectangular with rounded corners; it generally has flat upper and lower surfaces. The bow is elongated trapezoidal and tapers gradually from the point of the break (W.: 5.9mm) to a width of 3.5mm at the foot. The foot is simply squared off and decorated with two transversely incised grooves; the leg above is plain. On the lower surface the solid catch-plate survives well. It is broa…
Created on: Monday 12th August 2013
Last updated: Monday 12th August 2013
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.

Record ID: SOM-9F9187
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Published
An incomplete large Roman cast copper-alloy developed T-shaped brooch dating to the late 1st to early 2nd century AD. The pin, lower part of the bow and the foot are missing following old damage. The head has two hollow cylindrical wings with flattened upper surfaces. They held the axis bar for the hinged pin. The axis bar survives in part, largely corroded, made of iron. Between the wings on the under side of the head is a slot in which the pin would have hinged. On the underside of the wings behind the slot is a thickened patch which may have helped retain the pin in use. R…
Created on: Tuesday 13th August 2013
Last updated: Friday 10th January 2014
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.

Record ID: SOM-A01BE8
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Published
A Roman copper-alloy bow brooch dating to the 1st to 2nd century AD, incomplete in so far as it is missing its pin. The head has two hollow cylindrical wings both slightly abraded at their tips. They held the axis bar for the hinged pin. The axis bar survives in part, largely corroded, made of iron. Between the wings on the under side of the head is a slot in which the pin would have hinged. The wings are decorated with an incised line running across them diagonally, from the top of the pin slot to the back of the upper surface. The upper surface was also decorated on each side wi…
Created on: Tuesday 13th August 2013
Last updated: Monday 5th October 2015
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.

Record ID: SOM-21B4C2
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy Roman probable initial T-shaped brooch, incomplete in so far as it is missing its pin (later 1st-century AD). The brooch survives well, only having suffered some post-depositional abrasions and slight pitting. The head has tubular wings, flattened slightly on their upper surface. They are apparently plain. The axis bar is largely obscured by the wings, but is can be said to have been made from iron judging by orange corrosion product both at the wing terminals and within the pin slot. The hinged pin is missing. The upper bow emerges from the wings initially at a…
Created on: Monday 19th August 2013
Last updated: Monday 19th August 2013
Spatial data recorded. This findspot is known as 'Near Frome', grid reference and parish protected.

Record ID: SOM-5DE141
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Published
A damaged and incomplete copper-alloy 2nd-century Roman disc brooch of the tutulus type. The circular brooch would have originally had eight plain, squared off peripheral lugs; three are now missing. The lugs are external on a rim. The rim is echoed by a ridge within; the groove within may have held enamel. This border has received considerable old damage leading to fractures and losses at the circumference and the grooved zone within. A second zone of similar width sits within the inner ridge and before the central boss; this has suffered considerable losses and abrasions too. The ce…
Created on: Thursday 22nd August 2013
Last updated: Friday 10th January 2014
Spatial data recorded.

Record ID: SOM-87A344
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A fragment from a Roman cast copper-alloy developed T-shaped brooch dating to c. AD 75-150. The fragment consists of the abraded bow and foot with catch-plate on the reverse; the head and pin are both missing. The bow is flat with rounded edges. At its centre it expands into a flattened lozenge shape. This shape is decorated on the front with a moulded lozenge within a lozenge recess. Within the moulding is a further recess with traces of red enamel. The bow curves gradually in profile. The catch-plate is abraded at the foot. For similar brooches see Hattatt (2000, 303; refs. 318, 319).
Created on: Thursday 5th September 2013
Last updated: Wednesday 23rd October 2013
Spatial data recorded.

Record ID: SOM-7ED8B2
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Published
A copper-alloy Roman zoomorphic plate brooch in the shape of fabulous creature, a sea monster with two heads, of Feugère's type 29a5 (c. 2nd century AD). The creature has a curved L-shaped body and is going right with its head looking backwards. At the other end the tail loops round on itself, curving at its tip to face the head in a zoomorphic terminal. Protruding from the loop of the tail is a triangular projection. This projection features an enamelled cell, largely red apart form a central pellet in a different colour, now decayed. The animal's main body also features a curved L-…
Created on: Wednesday 23rd October 2013
Last updated: Monday 11th February 2019
Spatial data recorded. This findspot is known as 'Somerton', grid reference and parish protected.

Record ID: SOM-7C0E95
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
The lower part of the bow and catch-plate of a Roman copper-alloy brooch. The upper part of the bow, the head of the brooch and pin are missing due to an old, twisted irregular break. In cross-section, the bow is rectangular with rounded corners; it generally has flat upper and lower surfaces, though with a recessed channel on the lower . The bow is elongated trapezoidal and tapers gradually from the point of the break (W.: 8.5mm) to a width of 5.6mm at the foot. The foot terminates in a transverse ridge decorated with two angled incisions. The leg above is finely decorated above a pa…
Created on: Monday 4th November 2013
Last updated: Tuesday 19th November 2013
Spatial data recorded. This findspot is known as 'Otterhampton CP', grid reference and parish protected.

Record ID: SOM-21D1B2
Object type: BROOCH
Broad period: IRON AGE
County: Somerset
Workflow stage: Published
An Iron Age La Tène IBa type brooch dating to the 4th to 3rd centuries BC, incomplete in so far as it is missing its pin. The brooch comprises a sprung head, a curved bow and foot with catch-plate. The brooch has been made in one piece. The head is formed from the top of the bow, which becomes thinner and circular in section forming a thick wire. This coils twice to the left of the bow (when in plan), loops over the top of the head and coils twice towards the centre. At this point the wire has broken, but would have formed the pin. Within the coils is a corroded crude bar in copper a…
Created on: Tuesday 12th November 2013
Last updated: Sunday 2nd February 2014
Spatial data recorded. This findspot is known as 'Wincanton', grid reference and parish protected.

Record ID: SOM-B70767
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A copper alloy T-shaped brooch of early Roman date. This Wilsford type brooch is incomplete in as much as it is missing its pin. The cylindrical wings conceal the copper-alloy axis bar for the hinged pin. Their upper surfaces are decorated with two incised lines at each end. The head of the pin has a pointed projection for tensioning, but this is all that survives of the pin (loose). The bow has a D-shaped cross-section and projects forward from the wings. The upper bow has moulded decoration in the form of four ridges with central grooves either side of a central recessed rib. Its l…
Created on: Tuesday 19th November 2013
Last updated: Tuesday 19th November 2013
Spatial data recorded. This findspot is known as 'Wincanton', grid reference and parish protected.

Record ID: SOM-B764A1
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
An incomplete cast copper-alloy Dorset-type T-shaped brooch of early Roman date. The head, pin and upper part of the bow are missing to old breaks; the rest of the bow, the leg and catch-plate survive. The head is lost to a horizontal break, at which point the bow has also been twisted. The bow is sub-rectangular in cross-section. The front is moulded with two ridges at the sides and a central bevelled ridge with deep longituidinal groove. Compared to the bow the plain leg is thinned. It tapers gradually, terminating in a ridged foot knob. On its lower surface the catch-plate survi…
Created on: Tuesday 19th November 2013
Last updated: Tuesday 19th November 2013
Spatial data recorded. This findspot is known as 'Wincanton', grid reference and parish protected.

Record ID: SOM-B7BB87
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Published
An incomplete copper-alloy Roman brooch of Colchester derivative, Polden Hill (Mackreth Group 5, flat wing ends type, Western Group), cf. Mackreth 2011, 5.b1. Plate 50. No. 1735 of later 1st to mid 2nd century AD. The pin mechanism is missing, with the pin, as is the foot and catch-plate. The head has short wings (given a wide bow at this point) with oval perforated end plates; the axis bar is missing, both plates having abraded through. There is a double transverse groove and ridge at each terminal. Set forward from the centre of the head is a rearward facing hook: possibly a loop f…
Created on: Tuesday 19th November 2013
Last updated: Wednesday 26th April 2017
Spatial data recorded. This findspot is known as 'Wincanton', grid reference and parish protected.

Record ID: SOM-699C37
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Published
A Roman copper-alloy devolved T-shaped brooch of Hull T138 dating to the late first to second century AD, incomplete in so far as it is missing most of its pin. The head has two short cylindrical wings, 23.2mm wide, to hold the axis bar for the hinged pin. Between the wings is a slot in which the remnants of the pin are hinged. The pin has a pointed spur at its head to aid hinging. It narrows to a circular cross-section before an early break. What survives has been bent downwards towards the back of the bow on the right hand side (when viewed in plan from below). There is corrosion pr…
Created on: Friday 3rd January 2014
Last updated: Monday 20th June 2022
Spatial data recorded. This findspot is known as 'Ilchester CP', grid reference and parish protected.

Record ID: SOM-6ACEE1
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Published
The leg and foot from a Roman copper-alloy bow brooch, possibly of the local devolved T-shaped type and dating to the 2nd century AD. The bow and leg are formed of a wide, flat and thin strip which narrows gradually towards the end. It is 11.7mm wide at the break and 6.6mm wide above the footknob. The knob is formed of a thick semicircle set at 90 degrees to the foot and slightly wider at 8.9mm. The bow is decorated on the front with three longitudinal grooves just below the old break, below which seven transverse ridges and concomitant grooves. On the back is a large catch-plate, …
Created on: Friday 3rd January 2014
Last updated: Wednesday 30th March 2016
Spatial data recorded. This findspot is known as 'Ilchester CP', grid reference and parish protected.

Record ID: SOM-ACACA4
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A Roman copper-alloy initial T-shaped brooch, incomplete in so far as it is missing the majority of its pin. The brooch consists of cylindrical wings, bow and foot with catch-plate at the back. The wings are decorated with a pair of incised lines at their tip on the upper surface. The front of this decoration is demarcated by a incised longitudinal line which travels towards the slot, without reaching it. The remains of the circular copper alloy axis bar is visible at the tips. Between the wings is a slot in which the remnants of the pin are hinged. The pin has a pointed spur at its h…
Created on: Monday 6th January 2014
Last updated: Monday 6th January 2014
Spatial data recorded. This findspot is known as 'Bawdrip CP', grid reference and parish protected.

Record ID: SOM-FEE050
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
An incomplete Roman copper-alloy T-shaped brooch, probably of devolved type, incomplete in so far as it is missing the pin, leg and concomitant catch-plate. The brooch consists of cylindrical wings and flat integral headloop, with bow below. The wings are seemingly plain. The remains of the circular iron axis bar is visible at the tips, as well as in the form of corrosion product in the slot. No traces of the pin are obvious within the slot. The bow projects from the front of the brooch in the centre of the head, in a steady arc that curves round through ninety degrees before trave…
Created on: Wednesday 22nd January 2014
Last updated: Wednesday 22nd January 2014
Spatial data recorded. This findspot is known as 'Bawdrip CP', grid reference and parish protected.

Record ID: SOM-E3B174
Object type: BROOCH
Broad period: IRON AGE
County: Somerset
Workflow stage: Awaiting validation
Upper part of the bow and head of a Late Iron Age cast copper alloy birdlip type brooch. The lower part of the bow, pin, foot and catchplate are missing. It the top of the remaining section the bow is oval with a concave back. This probably formed the trumpet shaped head with a spring held in the concave section, although the attachment is lost. The edges of this oval head are damaged, particularly around the lower edges and it may have been larger originally. From this oval top the bow rises at 90 degrees before bending over abruptly and running relatively straight to the foot. In…
Created on: Friday 14th February 2014
Last updated: Thursday 20th February 2014
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.

Record ID: SOM-083A37
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Published
An incomplete cast copper-alloy Dorset-type T-shaped brooch of early Roman date. The head, pin and upper part of the bow are missing to old breaks; the rest of the bow, the leg and catch-plate survive. The head is lost to an old, broadly horizontal break. The bow is sub-rectangular in cross-section. The front is moulded with two ridges at the sides and a central bevelled ridge with deep longituidinal groove. Between the ridges are very fine diagonally incised lines. Compared to the bow the plain leg is thinned. It tapers gradually, terminating in a ridged foot knob. On its lower surfa…
Created on: Friday 28th February 2014
Last updated: Sunday 15th February 2015
Spatial data recorded. This findspot is known as 'Somerton CP', grid reference and parish protected.

Record ID: SOM-08D517
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A fragment from the head and upper bow of a Roman copper-alloy initial T-shaped brooch. Between the wings is a slot on the lower surface for a hinged pin, below which a sub oval recess. Aligned with the slot on the upper surface is a longitudinal ridge which is given a ridged, or serrated, quality by numerous transverse nicks. Just before an old transverse break two lower, finer ridges begin to flank the central one. At the head end another old break has removed any lateral elements from the wings, or any of the head located above. The fragment curves in profile in a regular fas…
Created on: Friday 28th February 2014
Last updated: Friday 28th February 2014
Spatial data recorded. This findspot is known as 'Somerton CP', grid reference and parish protected.