Back to simple search | Back to advanced search

    You searched for:

    • Created by:Robert Webley
    • Direction:asc
    • County:Somerset
    • Show this many records per page:20
    • Primary material:Lead

  • Image not taken

Record ID: SOM-749FC1
Object type: WEIGHT
Broad period: UNKNOWN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A lead item formed of two truncated biconical elements attached together, both flat at the top. A median ridge on the exterior is visible, filed down in places. A large circular hole at a slight angle travels through the centre of the object measuring up to 14.9mm in diameter. The surface colour of this object is greyer than white suggesting a relatively recent date, although an earlier date cannot be ruled out entirely.
Created on: Wednesday 4th September 2013
Last updated: Wednesday 4th September 2013
Spatial data recorded.


  • Thumbnail image of SOM-8AB516

Record ID: SOM-8AB516
Object type: WEIGHT
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A medieval lead shield-shaped weight, probably for two ounces. The weight is decorated with a lion rampant on a raised panel. The perimeter step is decorated with lines. The lower surface is flat and plain. There are suggestions of a perforation central at the top of the panel. Similar weights can be found illustrated in Biggs (1992, 42-43), with direct comparisons in terms of size illustrated in Biggs and Withers (2000, 38; refs. 91 and 92). Its mass of 53.34g is c. 6% light of two ounces averdepois, following the 'binary' system of sixteen ounces to the pound effective from c. AD
Created on: Thursday 5th September 2013
Last updated: Thursday 5th September 2013
Spatial data recorded. This findspot is known as 'Bishop's Hull CP', grid reference and parish protected.


  • Thumbnail image of SOM-FBA501

Record ID: SOM-FBA501
Object type: BULLA
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Published Find published
A late medieval lead Papal bulla of Pope Paul II (r. AD 1464-1471). Paul II was the only pope to have his matrices redesigned; his successor reverted to the usual design which is essentially preserved to this day. On the obverse of the bulla are Saint Peter and Saint Paul nimbate and enthroned above and to each side of an orb. Uppermost between them their names are inscribed vertically . S . PAV / S . PET, an abbreviation for St. Paul and St. Peter. St. Paul is on the left of the seal looking right, depicted with a long pointed beard, holding a sword in his right hand and a book …
Created on: Tuesday 29th October 2013
Last updated: Tuesday 26th January 2021
Spatial data recorded. This findspot is known as 'Cheddon Fitzpaine CP', grid reference and parish protected.


  • Thumbnail image of SOM-0DF054

Record ID: SOM-0DF054
Object type: COIN MOULD
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A lead mould of medieval date for a groat of Henry VI, in two parts. The parts are formed of flat rectangular bars with corresponding diagonal ends at the 'coin end'. The sides are generally perpendicular to the main faces and the outer surfaces are not embellished; they are, however, scratched, with linear depressions in places, but with no marks for aligning the two parts. As implied, there is an impression of a coin towards each end with the diagonal finish. The impressions are of the faces of a groat of Henry VI: they measure c. 27.1mm in diameter each. Running from the impress…
Created on: Wednesday 30th October 2013
Last updated: Friday 25th August 2017
Spatial data recorded. This findspot is known as 'Faulkland', grid reference and parish protected.


  • Thumbnail image of SOM-0EC771

Record ID: SOM-0EC771
Object type: COIN MOULD
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A lead mould of medieval date for a halfpenny possibly of Edward III, in two parts. The parts are formed of broadly flat rectangular bars with squared off ends and slightly bowed sides. The sides are generally perpendicular to the main faces and the outer surfaces are not embellished; they are, however, scratched, with linear depressions in places. Two pairs of lines on the sides, both off centre, one slightly closer to the 'coin end', indicate the alignment of the parts when put together. Although the thickness of the parts varies in places they fit together well. As implied, the…
Created on: Wednesday 30th October 2013
Last updated: Wednesday 30th October 2013
Spatial data recorded. This findspot is known as 'Faulkland', grid reference and parish protected.


  • Thumbnail image of SOM-E2CC17

Record ID: SOM-E2CC17
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval two part cloth seal, probably from Valenciennes in France. The front disc and part of the projection survives but the back disc and tab that linked the disks are missing to old breaks. The front disc has a raised design of a basically rendered swan standing left with the inscription [...]ALLENC[...] written in Roman capitals around the left edge and towards the base. On the reverse of this disc are a number of depressions. No obvious impression of cloth survives. A perforation is present adjacent to the projection towards the circumference. A seal of Valenciennes is…
Created on: Friday 14th February 2014
Last updated: Friday 14th February 2014
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.


  • Thumbnail image of SOM-373512

Record ID: SOM-373512
Object type: LID
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A lid formed of thick lead sheet with oval domed centre of probably Roman date. The sheet has been cut broadly into a rectangular shape. It is thick at c. 3-4mm. A large sub-oval dome has been formed at the centre from hammering from one side. It attains a height of c. 45mm and measures c. 200mm by max. width c. 125mm; one side tapers and it is c. 110mm at the narrower end. The lid was attached by iron rivets, 15 in total, that follow the edge of the dome rather than the lid overall. They are generally evenly spaced, though with a cluster towards one corner. They have expanded domes a…
Created on: Friday 2nd May 2014
Last updated: Tuesday 21st July 2015
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 7
Search server index: asgard

You are viewing records: 1 - 7.

Search statistics

  • Total quantity: 7
  • Mean quantity: 1.000
  • Maximum: 1

Filter your search

Institution

1 - 7 of 7 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.