Record ID: SOM-B7CA61
Object type: COIN HOARD
Broad period: ROMAN
County: Somerset
Workflow stage: Published
1 as, 1 sestertius, 1 denarius and 7562 radiates and a bronze ring to AD 274 Cu-alloy ring (3.60g; max diam. 26mm) found fused to sestertius. Uncertain if a finger ring or bag fastening. Summary (all radiates unless noted): Central Empire Marcus Aurelius (AD 161-80), 1 (sestertius) Wars of the Succession (AD 193-7) Septimius Severus, 1 (denarius) Gordian III (AD 238-44), 1 Philip I (AD 244-9), 1 Decius (AD 249-51), 1 Herennia Etruscilla, 1 Trebonianus Gallus (AD 251-3), 4 Joint reign of Valerian & Gallienus (AD 253-60) Valerian I, 107 Gallienus, 45 Uncertain (Valeri…
Created on: Tuesday 19th November 2013
Last updated: Tuesday 11th April 2017
Spatial data recorded. This findspot is known as 'South Petherton', grid reference and parish protected.

Record ID: SOM-E96F91
Object type: COIN WEIGHT
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Cast copper alloy weight for a half Ryal (Rose Noble). The weight is circular and flat with a raised design on one side only. The design is of the king with sword and square topped shield standing in a ship with rectangular bow and stern and a rose on the side of the ship. It is 14.2mm in diameter, 3.2mm thick and weighs 3.55 grams, 54.8 grains. A full weight half ryal would have weighed 60 grains (Withers and Withers 1995, 68) but weights were normally made to the legal minimum weight which was slightly less and can lose weight through corrosion processes, the edges of this example…
Created on: Friday 5th April 2013
Last updated: Friday 3rd May 2013
Spatial data recorded. This findspot is known as 'Chedzoy', grid reference and parish protected.

Record ID: SOM-B4DC14
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A square double-sided copper-alloy coin weight of post-medieval date. The weight is for a unite (20 shillings/laurel) of Charles I (1625-1632; Withers and Withers 1995, 12-13; ref. XXs e). The top left corner of the upper surface is counter stamped with a crowned 'C'. The stamp is typical of square coin weights of Charles I (Withers and Withers 1995, 67). Biggs (1992, 30) notes that square coin weights were succeeded by round ones in 1632. The upper surface of the weight has slightly smaller dimensions than the lower. At 8.58 g/132.4 grains this object is now just over 5% under sta…
Created on: Wednesday 12th February 2014
Last updated: Wednesday 12th February 2014
Spatial data recorded. This findspot is known as 'Wellington CP', grid reference and parish protected.

Record ID: SOM-89BBF6
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval copper-alloy coin weight for a rose ryal of James I. The obverse depicts the shield of British arms on a rose struck at an angle to the flan, and the reverse is a crown above XXXIII // S within a circular border. There is a crowned I countermark in the top right corner of the reverse. The coin weight is 19.4mm square by 4.3mm thick and weighs 149.8 grains (9.7g). The coin weight is 24% light compared to its official (lighter) weight of 196.5 grains (Withers and Withers 1995, 68). The coin was issued between AD 1604 and 1619; this weight with XXXIII s was issue…
Created on: Thursday 5th September 2013
Last updated: Thursday 5th September 2013
Spatial data recorded. This findspot is known as 'Bishop's Hull CP', grid reference and parish protected.

Record ID: SOM-239E37
Object type: COIN WEIGHT
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy uniface weight for a noble. The weight is circular and flat with a raised design on one side only. The design is of a facing ship with fore and aft castles. It is 16.9mm in diameter, 4.1mm thick and weighs 6.28 grams, 96.9 grains. The metal is pitted in places, especially on the lower surface. A full weight noble would have weighed 108 grains between AD 1412 and 1464 (Withers and Withers 1995, 68); the earlier noble had a higher mass. Weights were normally made to the legal minimum weight which was slightly less and can lose weight through corrosion processes. This…
Created on: Tuesday 12th November 2013
Last updated: Tuesday 12th November 2013
Spatial data recorded. This findspot is known as 'West and Middle Chinnock CP', grid reference and parish protected.

Record ID: SOM-1A32D5
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy square coin weight for a spur ryal of James I, tariffed at XVIs VId indicating it related to coins of the revalued 2nd coinage, 1612-1619. These weights were replaced by round ones with similar designs post 1632 (Withers and Withers 1995, 38). The coin bears the common countermark of a stamped crowned I in the top left corner of the reverse. The obverse design has been struck off centre. The coin weight measures 16mm by 16mm, 3-4mm thick and weighs 5.64 grams (87.0 grains); it is 11-12% light.
Created on: Friday 6th June 2014
Last updated: Friday 6th June 2014
Spatial data recorded. This findspot is known as 'Near Wells', grid reference and parish protected.

Record ID: SOM-2FC516
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval copper-alloy square biface coin weight possibly for a Lion, possibly made in Antwerp. The weight is flat and on one face is an unclear raised design possibly of a lion seated left, tail curled up over haunches. This design is usually flanked by pillars with three arches above and floor below all within a beaded circular border. On the reverse there may be a hand, possibly flanked by initials, also within a beaded circular border. It is 15.3mm by 14.8mm and 3.2mm thick; it weighs 4.61g/71.0 grains The Lion was issued from AD 1454-1460 in Burgundy by Philip the Good (…
Created on: Friday 14th March 2014
Last updated: Friday 14th March 2014
Spatial data recorded. This findspot is known as 'Carhampton CP', grid reference and parish protected.

Record ID: SOM-E406A5
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy seemingly unifacial coin weight for a half guinea of late post-medieval date. The coin weight is square in plan with a thin rectangular cross-section. One side is stamped with the letters P G, above the numerals 2 (doublestruck) and 16; the back is plain. Between the letters, and with its top slightly above is a stamped rectangle with engrailed sides, probably a local maker's mark. The initials and numbers refer to the weight of the object in pennyweights (P 2) and grains (G 16) and refer to the weight of the gold half guinea. Weights with this design and value were iss…
Created on: Monday 28th April 2014
Last updated: Monday 28th April 2014
Spatial data recorded. This findspot is known as 'Milverton CP', grid reference and parish protected.

Record ID: SOM-E64731
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A complete copper-alloy bifacial coin weight, for the Portuguese 'joe' gold coins, issued between AD 1760 and AD 1773. The value of 18 shillings indicated was equivalent to the 'half joe'/2 escudos coin (Withers & Withers 1995, 55). Both faces are marked with a small S above a large 18 above a small 4 . 14 1/2, all within a laurel wreath. This indicates a weight equivalent to that of 18 shillings. The 4 . 14 1/2 stood for the official weight of the coin (4 pennyweights and 14.5 grains). It has a diameter of 19.6mm and is 3.4mm thick. It weighs 6.85g/105.8 grains. As such it is n…
Created on: Monday 28th April 2014
Last updated: Monday 28th April 2014
Spatial data recorded. This findspot is known as 'Milverton CP', grid reference and parish protected.

Record ID: SOM-A63DE5
Object type: DAGGER
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy dagger guard (quillon) of late medieval date (c. 15th century). It consists of a broadly lozengiform copper alloy bar which expands at either end and widens in the centre to accommodate a rectangular hole (now blocked) - this would have taken the tang of the dagger. Extending to one side and from either end of the main bar, are two joined arches (resembling an inverted number three). The object is plain but corroded. Where it survives the patina is grey in colour; the underlying metal is red/brown. The dagger guard is very similar to refs. 628 and 629, illustrated…
Created on: Thursday 1st August 2013
Last updated: Thursday 1st August 2013
Spatial data recorded. This findspot is known as 'Near Wells', grid reference and parish protected.

Record ID: SOM-62FD65
Object type: DAGGER
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A broken and incomplete possible medieval cast copper-alloy dagger guard (c. 15th century AD). It consists of a central hollow block with one long side and one short side effectively missing. This block has a large central aperture 12.1mm max. length, 4.6mm min. width. This aperture seem to widen, though without the side to measure against it is difficult to provide a maximum width. From the extant short end a thick arm (?quillon) emerges which immediately begins to bifurcate. Each prong is circular in cross-section once separated, c. 7.5mm in diameter. The ends of each prong are w…
Created on: Friday 16th May 2014
Last updated: Friday 23rd May 2014
Spatial data recorded. This findspot is known as 'Carhampton CP', grid reference and parish protected.

Record ID: SOM-67D422
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Loop/eye part of a two part cast copper alloy dress fastener of Post-Medieval, 17th century date (AD 1600-1700). The fastener is flat and largely pointed oval in plan with an integral rectangular loop at one end of the main plate and a grooved ornamental knop at the other, reminiscent of a scallop shell. Flanking the beginnings of the ornamental knop is an integral perforated knop to each side. Two further attachment knops protrude from the widest part of the plate, giving a total of four such loops. The front of the plate is decorated with a moulded human facing bust with clusters of…
Created on: Thursday 11th April 2013
Last updated: Thursday 2nd November 2017
Spatial data recorded.

Record ID: SOM-88986D
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval cast copper-alloy dress fastener eye-piece (16-17th century AD). It has an oval plate with three loops for attachment: two at the base, protruding to each side, and one at the other end with small lateral pellets at its base giving the effect of a debased trefoil. There is a debased bifurcated knop midway along the long sides; both are now abraded. An integral rectangular loop emerges from the pair of attachment loops at the base. It has been bent upwards at an angle of around forty degrees. The upper surface of the panel is decorated with a moulded human en-face mask …
Created on: Friday 30th May 2014
Last updated: Wednesday 5th October 2016
Spatial data recorded. This findspot is known as 'Wellington CP', grid reference and parish protected.

Record ID: SOM-1F5DBB
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A slightly damaged post-medieval cast copper-alloy dress fastener hook-piece (16-17th century AD). It has an oval plate with three loops for attachment: two at the base, at its junction with the hook, protruding to each side, and one at the other end with small lateral pellets at its base giving the effect of a debased trefoil. There is a debased bifurcated knop midway along the long sides; both are now abraded. An integral flat rectangular hook emerges from the pair of attachment loops at the base. It curves upwards before an old break which has removed the tip. The upper surface of …
Created on: Wednesday 6th August 2014
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Near Wincanton', grid reference and parish protected.

Record ID: PAS-B9606C
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
An incomplete cast copper-alloy dress fastener of post-medieval date (c. 17th century). It has broken at the attachment end such that it cannot be established whether this is a loop or hook part of the two-part fastener. In addition to the break the object has been bent slightly at that end. The object is flat and largely sub-oval, with three integral knops; one at the centre of each side, and one at the centre of the narrower end of the plate. The latter is broken through while the others survive intact; they are perforated and have a small knop on their outer edge. The front of the…
Created on: Friday 13th March 2020
Last updated: Friday 27th March 2020
Spatial data recorded. This findspot is known as 'Cheddar CP', grid reference and parish protected.

Record ID: SOM-BFAD38
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A corroded and slightly abraded copper-alloy post-medieval dress fastener in the form of a scallop. This is the eye section of such fasteners, with its rectangular loop intact. The plate is shallowly convex with incised radiating grooves. The reverse is plain and recessed. At the top of the shell is a circular attachment loop. A further pair are located one either side at the base, one of these had abraded through. A parallel can be found illustrated in Read (2008, 174; ref. 659), slightly more elongated; for a hook-piece of similar proportions see ibid. (2008, 174; ref. 657), there c…
Created on: Tuesday 7th January 2014
Last updated: Saturday 5th January 2019
Spatial data recorded. This findspot is known as 'Ashwick CP', grid reference and parish protected.

Record ID: SOM-7BA565
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval copper-alloy dress fastener, sub lozengiform. This is the eye section of such fasteners, with its rectangular loop intact. The central area of the plate has a raised foliate design with a central quartered berry and four leaves in cross formation with four small circular berries in the angles. This design is within a broadly lozengiform line border formed of four lines with scrolled ends, at the middle corners forming a pair of projecting rounded knops at either side. There are two pierced lobes flanking the hook, one either side. At the opposite end to the hook is a t…
Created on: Friday 11th April 2014
Last updated: Friday 4th January 2019
Spatial data recorded. This findspot is known as 'Milverton CP', grid reference and parish protected.

Record ID: SOM-D4F332
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A damaged and incomplete copper-alloy dress hook dating to the post-medieval period. The object has been cast in one piece with an openwork, moulded upper surface; the lower surface is flat. The attachment loop is all but missing following old damage. The plate features a pair of transverse bars with central rounded bosses. The aperture between the upper bar and the former top would have formed the loop. The aperture between the two bars is dumb bell shaped. The lower bar abuts the base of the plate; there is a small sub-triangular perforation below. At the ends of the bars the sides …
Created on: Monday 22nd July 2013
Last updated: Sunday 23rd February 2014
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.

Record ID: SOM-A17FE0
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A damaged and incomplete copper-alloy dress hook dating to the post-medieval period, missing its hook. The object has been cast in one piece with an openwork, moulded upper surface; the lower surface is flat. The hook has been lost in its entirety following old damage. The plate is sub-circular, with a rectangular bar attached to it at two large circular pellets. The aperture between the bar and the top of the plate would have formed the loop. The plate has a central pellets from which cross arms emerge, the lateral pair protruding beyond the plate's edges. In each quarter created by…
Created on: Wednesday 7th May 2014
Last updated: Wednesday 7th May 2014
Spatial data recorded. This findspot is known as 'Near Wincanton', grid reference and parish protected.

Record ID: SOM-6E1A40
Object type: FIGURINE
Broad period: IRON AGE
County: Somerset
Workflow stage: Published
A cast copper-alloy fragment moulded in the round in the form of a bovine head, possibly of Late Iron Age/early Roman date. The creature has a snout that curves upwards at the tip, broadly circular in cross-section, and with a triangular flat area on the tip's upper surface to represent a nose. The sides of the upper surface behind this are bevelled. Behind this are oval eyes moulded in low relief. At right angles to the back of the snout is a neck of sub-triangular cross-section. This has been truncated below the snout as a result of old damage. At the top, behind the eyes, are two a…
Created on: Tuesday 10th December 2013
Last updated: Monday 6th January 2014
Spatial data recorded. This findspot is known as 'Nynehead CP', grid reference and parish protected.

Record ID: SOM-EAD7B0
Object type: FINGER RING
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A complete Roman copper alloy finger ring with black glass intaglio. The bezel is widened and flattened; the shoulders are also relatively wide before tapering to a thin hoop around half way down the sides (min. W.: 2.8mm). There are some abrasions to the edges of the hoop and a recess formed through corrosion on the underside of the bezel. The bezel is very slightly raised in around the setting. The intaglio is bevelled externally leaving a flat oval central zone with design set in. The design (on the intaglio) is of a human figure, probably female, seated left and turned to the view…
Created on: Friday 3rd October 2014
Last updated: Monday 6th October 2014
Spatial data recorded. This findspot is known as 'Kingsdon CP', grid reference and parish protected.

Record ID: SOM-9AAFF3
Object type: HAMMER
Broad period: BRONZE AGE
County: Somerset
Workflow stage: Published
Description: Late Bronze Age socketed hammer, broadly sub-rectangular with slightly convex faces and a square socket. The top and bottom face angle slightly together towards the striking surface giving the sides of the hammer a trapezoid shape. The striking surface is also convex curved giving rounded ends to the sides of the hammer. There is a wide, plain thickened collar at the socket end of the hammer adjacent to the rim; the corners of this are rounded giving a sub-square outer edge to the rim. There is no clear evidence for a loop, although on side is corroded and could potential…
Created on: Wednesday 17th September 2014
Last updated: Tuesday 2nd July 2019
Spatial data recorded. This findspot is known as 'Whitelackington CP', grid reference and parish protected.

Record ID: SOM-7B84A4
Object type: HARNESS FITTING
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy strap-fitting of medieval or post-medieval date. The artefact consists of two roughly parallel sub-rectangular plates of equal form, separated from each other by a central gap and joined by a basal loop. The now-missing strap would have fitted between the plates, where it would have been held in place by two rivets, both missing. The plates expand gradually and slightly towards the attachment end which is incurved. There are some small losses at this end. One pair of rivet holes is at this end, the other above the loop. The basal loop, which has a convex upper surface, …
Created on: Monday 4th November 2013
Last updated: Wednesday 24th February 2021
Spatial data recorded. This findspot is known as 'Otterhampton CP', grid reference and parish protected.

Record ID: SOM-8A2927
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A corroded, but complete shield-shaped cast copper-alloy harness pendant bearing a zoomorphic device: a peacock in his pride. The object is of the 'heater' shield shape, that is, with a flat top, and sides which curve steeply to a point. From the top edge a suspension loop protrudes centrally at ninety degrees to the pendant; it is angled forwards in an oval pierced loop above a low double transverse ridge on the upper surface. The pendant's upper surface features moulded decoration in low relief the form of a peacock with tail fanned out behind them, with tail below, legs splay…
Created on: Thursday 5th September 2013
Last updated: Thursday 5th September 2013
Spatial data recorded. This findspot is known as 'Nynehead CP', grid reference and parish protected.

Record ID: SOM-9C76BC
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A cast copper-alloy medieval harness pendant set of c.14th century date. The set consists of a harness pendant suspension mount, from which hangs a broken sexfoil openwork pendant. A small pendant suspension mount is riveted through a hole at the top of the openwork pendant and from this a bell hangs. The harness pendant suspension mount is essentially an extended bar mount of largely trapezoidal cross-section. Its back is flat. At each end is a perforated, moulded round terminal with protruding knop on the outer edge. Both terminals have been bent backwards in the past, one more s…
Created on: Friday 5th September 2014
Last updated: Wednesday 10th September 2014
Spatial data recorded. This findspot is known as 'Nynehead CP', grid reference and parish protected.

Record ID: SOM-0E7DC4
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A complete harness pendant set of medieval date, about AD 1100-1300. The pendant is broadly circular, with a convex front with traces of gilding. The reverse is hollow. A long integral attachment loop projects upwards at the apex; it is at right angles to the pendant. There is a transverse ridge on the front at the junction of loop and plate. The pendant suspension mount is circular, convex at the front and was also gilded. A sub-rectangular tab projecting downwards has a slot in it and is bent back on itself to form a double hinge lug supporting the iron axis bar. The tab appears to…
Created on: Tuesday 17th March 2020
Last updated: Friday 27th March 2020
Spatial data recorded. This findspot is known as 'Cheddar CP', grid reference and parish protected.

Record ID: SOM-6898F8
Object type: JETTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval copper alloy jetton, Lion of St Mark / imperial orb in tressure type, Nuremberg stock type by anonymous issuer, c. AD 1490-1550, cf. Mitchiner 1998, 360-361
Created on: Thursday 11th April 2013
Last updated: Thursday 11th April 2013
Spatial data recorded.

Record ID: SOM-89EAB7
Object type: JETTON
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A medieval French copper-alloy jetton of Shield of France Ancient type, IE SVI DE LATON BEN SAI/AVE MARIA GRACIA PLE legend, AD 1380-c. 1422, cf. Mitchiner 419. The edges of the jetton are badly chipped.
Created on: Friday 28th November 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Crewkerne CP', grid reference and parish protected.

Record ID: SOM-8FAE87
Object type: JETTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval Nuremberg copper-alloy jetton of the 'Rose / orb' type struck by Hans Krauwinckel II (AD 1586-1635), 'GOTES SEGEN' legend, Mitchiner 1557ff.
Created on: Monday 12th August 2013
Last updated: Friday 1st October 2021
Spatial data recorded.

Record ID: SOM-319AC5
Object type: JETTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
An abraded, incomplete post-medieval Nuremberg copper-alloy jetton of uncertain master of the 'Rose / orb' type, c. AD 1580-1640. Only the part within the inner circle has effectively survived, with ragged breaks all around.
Created on: Friday 14th March 2014
Last updated: Friday 14th March 2014
Spatial data recorded. This findspot is known as 'Carhampton CP', grid reference and parish protected.

Record ID: SOM-321356
Object type: JETTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A corroded and abraded bent late 15th/16th-century copper-alloy Nuremberg post-medieval jetton of the 'ship-penny' type, anonymous issue (c. AD 1490-1550; cf. Mitchiner 1166ff.)
Created on: Friday 14th March 2014
Last updated: Monday 17th March 2014
Spatial data recorded. This findspot is known as 'Carhampton CP', grid reference and parish protected.

Record ID: SOM-517036
Object type: JETTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval Nuremberg copper-alloy jetton of Wolf Lauffer I (fl. c. 1583-1601), rose/orb type, ALVNSER HAB IST GOTES GA legend (All we have is a gift of God), c. AD 1583-1601. This jetton has been slightly bent. It has a shallow curved removal at one point of the circumference from the process of cutting the flan. The reverse legend is not published in the main reference work, but is evidenced on this database, refs. SF10957, NMS-EFE6. Aspects such as the relatively short obverse legend and rendering of the name Wolf, as Wvlf with a 'v', indicate that this is a jetton of Wol…
Created on: Wednesday 9th April 2014
Last updated: Wednesday 9th April 2014
Spatial data recorded. This findspot is known as 'Burrowbridge CP', grid reference and parish protected.

Record ID: SOM-52C8D5
Object type: JETTON
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A medieval French copper-alloy jetton of Crown type, AVE MARIA GRACIA PL legend, AD 1385-c. 1422, cf. Mitchiner 478a var. This jetton has an abraded circumference.
Created on: Wednesday 9th April 2014
Last updated: Thursday 10th April 2014
Spatial data recorded. This findspot is known as 'Milverton CP', grid reference and parish protected.

Record ID: SOM-54FA35
Object type: JETTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval Nuremberg copper-alloy jetton of anonymous issuer, 'French shield' type, fictitious legend, c. AD 1500-1525, see Mitchiner (1988, 355ff.). This very corroded jetton has an abraded circumference and has been bent.
Created on: Wednesday 9th April 2014
Last updated: Thursday 10th April 2014
Spatial data recorded. This findspot is known as 'Milverton CP', grid reference and parish protected.

Record ID: SOM-524592
Object type: JETTON
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A medieval copper-alloy Nuremberg jetton of anonymous issuer dating to the period c. 1480-1500.Dauphinétype with fictitious legend, Minted at Nuremberg. See Mitchiner (1988, 347) nos. 1041-1042. This jetton is extremely corroded and has been slightly bent. It has been pierced towards the circumference on the obverse face at 3 o'clock on the obverse, around 10 o'clock on the reverse. presumably for conversion into an item of jewellery. The hole has broken through as a result of old damage.
Created on: Wednesday 9th April 2014
Last updated: Thursday 18th August 2022
Spatial data recorded. This findspot is known as 'Burrowbridge CP', grid reference and parish protected.

Record ID: SOM-2C2B20
Object type: JETTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A worn and bent post-medieval Nuremberg copper-alloy jetton of Hans Krauwinckel II (fl. 1586-1635) of the 'Rose / orb' type, 'GOTTES GABEN' legend, Mitchiner 1534ff. This jetton has received a large perforation at the inner circle through the reverse at 11 o'clock, corresponding to 1 o'clock on the obverse.
Created on: Monday 7th October 2013
Last updated: Tuesday 8th October 2013
Spatial data recorded.

Record ID: DEV-55BD90
Object type: JETTON
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
An almost complete medieval copper-alloy French jetton of the 'shield of France modern' type, dating to c. 1385-1488. The quatrefoil border around the obverse shield is difficult to parallel; the jetton has thus been marked as noteworthy. Measurements: 25.5 mm diameter, weight 2.46 g This jetton has suffered some minor losses to its circumference.
Created on: Thursday 30th March 2023
Last updated: Tuesday 4th April 2023
Spatial data recorded.

Record ID: SOM-8F3994
Object type: KEY (LOCKING)
Broad period: ROMAN
County: Somerset
Workflow stage: Published
A copper-alloy finger-ring with integral key dating to the earlier Roman period. The hoop is broadly circular and D-shaped in cross-section, being flat internally (int. dia.: 17.2mm max.). There are no shoulders as such and the bezel is only slightly thicker than the hoop. As with such artefacts the bit protrudes at right angles to the bezel such that the key element lay flat on the finger. The bit begins with a trapezoidal base that is decorated with a pair of transverse grooves. Above this is a recess each side to a narrow waist before the main sub-triangular upper element. The tria…
Created on: Monday 12th August 2013
Last updated: Tuesday 6th August 2019
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.

Record ID: SOM-E16189
Object type: KNIFE
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A complete sheet copper-alloy hilt-plate from a medieval whittle-tang knife. The object is an elongated trapezoidal shape. It is slightly convex in profile and bent down at the narrow end. It has a broadly trapezoidal perforation through the lower surface, nearer the wide end. The object is corroded with a dark-green patina where it survives. No decoration is discernible. Such hilt-plates tend to be given a 15th-century date, although they could be earlier.
Created on: Thursday 22nd May 2014
Last updated: Monday 2nd June 2014
Spatial data recorded. This findspot is known as 'Carhampton CP', grid reference and parish protected.

Record ID: DEV-12DEE1
Object type: LATCH
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
An incomplete cast copper-alloy door or window latch in the form of a long-beaked bird's head (c. 17th-18th century). The object has a curved beak section divided from a rectangular plate by a moulded collar. The head is decorated with an incised oval eye, and a curved line down the centre of the beak. The reverse is plain and undecorated. The latch is a medium green colour. Measurements: 60 mm (current) length, 48 mm wide, 4 mm thick and weighs 33.47 g The object is similar to NMS-100CA3, SWYOR-FC4FF7, HAMP-477952 and KENT-ACF377 on this database. Another similar exa…
Created on: Monday 6th February 2023
Last updated: Monday 21st August 2023
Spatial data recorded.