Back to simple search | Back to advanced search
You searched for:
Record ID: SOM-E3B174
Object type: BROOCH
Broad period: IRON AGE
County: Somerset
Workflow stage: Awaiting validation
Upper part of the bow and head of a Late Iron Age cast copper alloy birdlip type brooch. The lower part of the bow, pin, foot and catchplate are missing. It the top of the remaining section the bow is oval with a concave back. This probably formed the trumpet shaped head with a spring held in the concave section, although the attachment is lost. The edges of this oval head are damaged, particularly around the lower edges and it may have been larger originally. From this oval top the bow rises at 90 degrees before bending over abruptly and running relatively straight to the foot.
In…
Created on: Friday 14th February 2014
Last updated: Thursday 20th February 2014
Spatial data recorded.
This findspot is known as 'Misterton CP', grid reference and parish protected.
Record ID: SOM-083A37
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Published
An incomplete cast copper-alloy Dorset-type T-shaped brooch of early Roman date. The head, pin and upper part of the bow are missing to old breaks; the rest of the bow, the leg and catch-plate survive. The head is lost to an old, broadly horizontal break. The bow is sub-rectangular in cross-section. The front is moulded with two ridges at the sides and a central bevelled ridge with deep longituidinal groove. Between the ridges are very fine diagonally incised lines. Compared to the bow the plain leg is thinned. It tapers gradually, terminating in a ridged foot knob. On its lower surfa…
Created on: Friday 28th February 2014
Last updated: Sunday 15th February 2015
Spatial data recorded.
This findspot is known as 'Somerton CP', grid reference and parish protected.
Record ID: SOM-08D517
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A fragment from the head and upper bow of a Roman copper-alloy initial T-shaped brooch. Between the wings is a slot on the lower surface for a hinged pin, below which a sub oval recess. Aligned with the slot on the upper surface is a longitudinal ridge which is given a ridged, or serrated, quality by numerous transverse nicks. Just before an old transverse break two lower, finer ridges begin to flank the central one. At the head end another old break has removed any lateral elements from the wings, or any of the head located above.
The fragment curves in profile in a regular fas…
Created on: Friday 28th February 2014
Last updated: Friday 28th February 2014
Spatial data recorded.
This findspot is known as 'Somerton CP', grid reference and parish protected.
Record ID: SOM-098681
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A fragment from the head and upper bow of a Roman copper-alloy bow brooch, possibly a Trumpet derivative. At the head is an abraded plate on the lower surface of which is a double semicircular pin lug. This latter has been perforated centrally to take an axis bar which was made of iron given the corrosion product around the lug. In places the plate has been broken right down to the lug; presumably it was once semicircular. The pin is missing.
The bow springs from the base of the head-plate and curves through ninety degrees such that it is parallel to the head-plate. The bow is …
Created on: Friday 28th February 2014
Last updated: Friday 28th February 2014
Spatial data recorded.
This findspot is known as 'Somerton CP', grid reference and parish protected.
Record ID: SOM-A3C7D6
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy button brooch of early-medieval date (5th - 6th century AD), of Class C. This example is incomplete in so far as its iron pin been lost to corrosion; a trace of corrosion product is present adjacent to one of the lugs (now so abraded that one cannot distinguish the pin lug from catch-plate). The rim is upturned (H.: 3.2mm) and very slightly flared. The upper surface is decorated with a central moulded anthropomorphic face-mask viewed straight on within a line border. The helmet is formed a pair of nested peltaic outlines. The eyebrows and nose are formed of a single T-s…
Created on: Friday 25th April 2014
Last updated: Friday 9th May 2014
Spatial data recorded.
This findspot is known as 'Pawlett CP', grid reference and parish protected.
Record ID: SOM-A36718
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
The fantail foot of a Roman bow brooch, probably a bow-and-fantail type or Aesica varient (1st/2nd century AD). The brooch has broken at a central circular 'button'. This would have been raised up; the upwards angle as the button connects to the foot seems an original feature and suggests the bow above was also raised. A central setting may have been housed within a double concentric ring moulding that forms the button or this may have been the point from which the bow projected up and out. The foot below is broadly triangular with slightly projecting ring settings at each lower corne…
Created on: Wednesday 7th May 2014
Last updated: Thursday 8th May 2014
Spatial data recorded.
This findspot is known as 'Near Wincanton', grid reference and parish protected.
Record ID: SOM-3829A6
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
The head and upper bow from a copper-alloy Developed T-shaped brooch of early Roman date. The leg is missing below a central knop due to an old break. Furthermore, only the head of the pin survives.
Cylindrical wings conceal the copper-alloy axis bar for the hinged pin. Their upper surfaces are decorated with two incised lines at each end. The head of the pin has a pointed projection for tensioning, but this is all that survives of the pin; the very beginnings of the shaft have been been to one side. On the upper surface the wing tip are decorated with a pair of transversely incise…
Created on: Wednesday 14th May 2014
Last updated: Tuesday 27th May 2014
Spatial data recorded.
This findspot is known as 'Near Wincanton', grid reference and parish protected.
Record ID: SOM-390654
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
The head and upper part of the bow of a Roman cast copper-alloy initial T-shaped brooch with hinged pin dating to c. AD 60-100. The lower part of the bow, foot and pin are missing to worn breaks. The brooch head has open-ended cylindrical wings containing an iron axis bar for the hinge. One wing has lost its upper half, possibly as a result of corrosion of the axis bar within. The complete wing is decorated with a double transverse ridge moulding towards its top with an incised line within. There is a large transverse slot through the centre of the underside of the head, between the w…
Created on: Wednesday 14th May 2014
Last updated: Thursday 21st August 2014
Spatial data recorded.
This findspot is known as 'Near Wincanton', grid reference and parish protected.
Record ID: SOM-DD947E
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval cast copper-alloy double-looped buckle, incomplete in so far as it is missing its pin. The frame is formed of two oval loops with a central narrowed strap bar of trapezoidal cross-section. Possible traces of iron corrosion product at the strap bar suggest that the pin was made of iron. The frame is 'D' shaped in section with a flat back and rounded front. There are projecting circular knops at the outer corners of the frame on both loops and rounded knops at the top and bottom of the strap bar. The pin is missing. It measures 35.4mm long, 24.2mm wide and 2.6mm thick. I…
Created on: Thursday 22nd May 2014
Last updated: Friday 23rd May 2014
Spatial data recorded.
This findspot is known as 'Carhampton CP', grid reference and parish protected.
Record ID: SOM-F6CC75
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A damaged and incomplete copper-alloy post-medieval buckle plate. The plate was formed of one copper-alloy sheet, cut and bent over on itself. It is broken in half, at the point where it would have looped round the buckle frame. From the broken point it continues with plain rectangular tabs on either side before narrowing to a waist of 7.7mm. The squared off terminal is flared out at 11.9mm wide. In addition to this hole at the terminal there is another hole central with the widest point; neither rivet survives. No decoration is visible on either surface. The metal is a general…
Created on: Friday 24th May 2013
Last updated: Tuesday 25th June 2013
Spatial data recorded.
Records per page: 10 20 40 100
Sort your search by:
Which direction?
Total results available: 412
Search server index: valhalla
You are viewing records: 31 - 40.