Record ID: SOM-B81C47
Object type: BOOK FITTING
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A large quatrefoil cruciform mount with central boss cast in copper alloy of medieval date. The base of the mount consists of four trefoil arms, each with a rivet hole in the centre; parts of three rivets survive in situ. The edge of the base is bevelled. The arms are arranged at the cardinal points around a circular domed central boss with a stepped base and small flattened top. The surface of the boss has flattened strips and file marks suggesting that the object has been turned. The reverse of the boss is hollow. The object has a mid-green shiny patina. One of the sides of one of t…
Created on: Friday 2nd August 2013
Last updated: Wednesday 19th December 2018
Spatial data recorded. This findspot is known as 'Wincanton', grid reference and parish protected.

Record ID: SOM-0ADED8
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A bent hook-piece from a copper-alloy post-medieval book-clasp. It is sub-rectangular in shape, with a flared attachment end; the other end is squared off with a central rectangular curved hook. The main body of the clasp is 14.2mm in width, flaring to a maximum of 16.3mm at the attachment end. At the flared end is a single central rivet hole; the iron rivet is corroded in place. On the upper surface there is a zone of decoration below the hook, covering around a third of the clasp. A stamped sunburst or flower sits within an elaborate quatrefoil border in this zone. The whole is b…
Created on: Friday 28th February 2014
Last updated: Friday 28th February 2014
Spatial data recorded.

Record ID: SOM-0B27C7
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A damaged and incomplete hook-piece from a copper-alloy post-medieval book-clasp. It is sub-rectangular in shape, with a flared attachment end, now heavily abraded; the other end is squared off with a central rectangular curved hook. The main body of the clasp is 17.5mm in width, flaring to a maximum of 20.6mm at the attachment end. At the flared end is a single central rivet hole; the remnants of an iron rivet is corroded in place. The object is decorated on its upper surface in four main transverse registers separated by transverse ridges moulded in low relief. The register close…
Created on: Friday 28th February 2014
Last updated: Friday 28th February 2014
Spatial data recorded.

Record ID: SOM-339F83
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A bent hook-piece from a copper-alloy post-medieval book-clasp. It is sub-rectangular in shape, with a slightly flared attachment end; the other end is squared off with a central rectangular curved hook. At the flared end is a single central rivet hole; the head of a copper-alloy rivet is corroded in place. A second corroded rivet head is located around two thirds of the way along the clasp. On the upper surface possible curvilinear decoration can possibly be discerned below the hook. Anything beyond is obscured by corrosion product; there is a circular discolouration around the ri…
Created on: Friday 14th March 2014
Last updated: Friday 14th March 2014
Spatial data recorded. This findspot is known as 'Carhampton CP', grid reference and parish protected.

Record ID: SOM-F529E7
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A hook-piece from a copper-alloy post-medieval book-clasp. It is sub-rectangular in shape, with a slightly flared, cusped attachment end; the other end is squared off with a central rectangular curved hook, narrowed in relation to the end. At the flared end is a single central rivet hole; the head of an iron rivet is corroded in place. A second corroded rivet head is located around two thirds of the way along the clasp. On the upper surface is a stamped ring-and-dot design towards the centre formed of two rings. It would seem to be otherwise plain. This artefact has corroded to…
Created on: Friday 23rd May 2014
Last updated: Monday 2nd June 2014
Spatial data recorded. This findspot is known as 'Carhampton CP', grid reference and parish protected.

Record ID: SOM-7CD507
Object type: BRACELET
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A damaged silver-plated copper-alloy bracelet of late post-medieval date (c. 19th century AD). The bracelet is broadly C-shaped in plan, with a rectangular central portion flanked on each side by an expanded lobe. The front and sides are cast in one, the sides flat and the front convex. A separate plate follows the curved line of the sides and was attached to the edges of the front giving a hollow front. The sides each terminate in a domed mammiform boss with central pellet; these flank the outer surface of the front. Each of the bosses is decorated with narrow depressions around it, …
Created on: Wednesday 23rd October 2013
Last updated: Wednesday 23rd October 2013
Spatial data recorded. This findspot is known as 'Somerton CP', grid reference and parish protected.

Record ID: SOM-8AEBB3
Object type: BRACELET
Broad period: ROMAN
County: Somerset
Workflow stage: Published
A twisted fragment consisting of approximately a quarter of a cast copper-alloy bracelet or armlet of late Roman date (c. 4th century AD). The fragment consists of the bracelet's terminal, the hook end, with abraded hook extant. The bracelet is rectangular with rounded corners in cross-section. In profile it has been twisted to one side, then round on itself such that it abuts the side of the hooked end at right angles to it. The bracelet expands in width gradually from the hook end. It is decorated unifacially using multiple motifs. What survives on this example is a raised lozenge w…
Created on: Monday 10th February 2014
Last updated: Saturday 16th August 2014
Spatial data recorded.

Record ID: SOM-4AC795
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy Roman zoomorphic plate brooch in the shape of a rabbit shown in profile. The rabbit is depicted seated with compact, rounded body and proportionally small head. The fore and hind paws seem to be truncated, but would not have been that prominent to judge from comparanda. The eye is formed of a punch and a small ear extends behind the head. The body is corroded and pitted; it is pitting that seems visible rather than recesses for enamel found on similar brooches. The lower surface features a broken and abraded double pin lug at the centre of the rabbit's rear, and a a…
Created on: Friday 9th August 2013
Last updated: Wednesday 4th September 2013
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.

Record ID: SOM-8C84C7
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
A Roman copper-alloy lower part of the bow and catch-plate of a brooch. The upper part of the bow, the head of the brooch and pin are missing due to an old patinated break. In cross-section, the bow is rectangular with rounded corners; it generally has flat upper and lower surfaces. The bow is elongated trapezoidal and tapers gradually from the point of the break (W.: 5.9mm) to a width of 3.5mm at the foot. The foot is simply squared off and decorated with two transversely incised grooves; the leg above is plain. On the lower surface the solid catch-plate survives well. It is broa…
Created on: Monday 12th August 2013
Last updated: Monday 12th August 2013
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.

Record ID: SOM-9F9187
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Published
An incomplete large Roman cast copper-alloy developed T-shaped brooch dating to the late 1st to early 2nd century AD. The pin, lower part of the bow and the foot are missing following old damage. The head has two hollow cylindrical wings with flattened upper surfaces. They held the axis bar for the hinged pin. The axis bar survives in part, largely corroded, made of iron. Between the wings on the under side of the head is a slot in which the pin would have hinged. On the underside of the wings behind the slot is a thickened patch which may have helped retain the pin in use. R…
Created on: Tuesday 13th August 2013
Last updated: Friday 10th January 2014
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.