• 

  Image not taken

Record ID: SOM-AE3647
Object type: COIN
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
An extremely corroded post-medieval copper-alloy farthing of Charles II (AD 1660-1685), dating between AD 1672-1679, London mint, Spink 3394
Created on: Monday 6th January 2014
Last updated: Monday 6th January 2014
Spatial data recorded.

Record ID: SOM-30BFC7
Object type: COIN
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval copper-alloy coin (uncertain maravedis denomination possibly) possibly struck by uncertain 17th-century Spanish ruler, uncertain mint. This coin is highly corroded and appears to have been cut around the edges, giving the flan a very broad hexgonal form. It may also have been counterstamped (resellado).
Created on: Friday 14th March 2014
Last updated: Friday 9th September 2022
Spatial data recorded. This findspot is known as 'Carhampton CP', grid reference and parish protected.

Record ID: SOM-B4DC14
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A square double-sided copper-alloy coin weight of post-medieval date. The weight is for a unite (20 shillings/laurel) of Charles I (1625-1632; Withers and Withers 1995, 12-13; ref. XXs e). The top left corner of the upper surface is counter stamped with a crowned 'C'. The stamp is typical of square coin weights of Charles I (Withers and Withers 1995, 67). Biggs (1992, 30) notes that square coin weights were succeeded by round ones in 1632. The upper surface of the weight has slightly smaller dimensions than the lower. At 8.58 g/132.4 grains this object is now just over 5% under sta…
Created on: Wednesday 12th February 2014
Last updated: Wednesday 12th February 2014
Spatial data recorded. This findspot is known as 'Wellington CP', grid reference and parish protected.

Record ID: SOM-89BBF6
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval copper-alloy coin weight for a rose ryal of James I. The obverse depicts the shield of British arms on a rose struck at an angle to the flan, and the reverse is a crown above XXXIII // S within a circular border. There is a crowned I countermark in the top right corner of the reverse. The coin weight is 19.4mm square by 4.3mm thick and weighs 149.8 grains (9.7g). The coin weight is 24% light compared to its official (lighter) weight of 196.5 grains (Withers and Withers 1995, 68). The coin was issued between AD 1604 and 1619; this weight with XXXIII s was issue…
Created on: Thursday 5th September 2013
Last updated: Thursday 5th September 2013
Spatial data recorded. This findspot is known as 'Bishop's Hull CP', grid reference and parish protected.

Record ID: SOM-1A32D5
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy square coin weight for a spur ryal of James I, tariffed at XVIs VId indicating it related to coins of the revalued 2nd coinage, 1612-1619. These weights were replaced by round ones with similar designs post 1632 (Withers and Withers 1995, 38). The coin bears the common countermark of a stamped crowned I in the top left corner of the reverse. The obverse design has been struck off centre. The coin weight measures 16mm by 16mm, 3-4mm thick and weighs 5.64 grams (87.0 grains); it is 11-12% light.
Created on: Friday 6th June 2014
Last updated: Friday 6th June 2014
Spatial data recorded. This findspot is known as 'Near Wells', grid reference and parish protected.

Record ID: SOM-2FC516
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval copper-alloy square biface coin weight possibly for a Lion, possibly made in Antwerp. The weight is flat and on one face is an unclear raised design possibly of a lion seated left, tail curled up over haunches. This design is usually flanked by pillars with three arches above and floor below all within a beaded circular border. On the reverse there may be a hand, possibly flanked by initials, also within a beaded circular border. It is 15.3mm by 14.8mm and 3.2mm thick; it weighs 4.61g/71.0 grains The Lion was issued from AD 1454-1460 in Burgundy by Philip the Good (…
Created on: Friday 14th March 2014
Last updated: Friday 14th March 2014
Spatial data recorded. This findspot is known as 'Carhampton CP', grid reference and parish protected.

Record ID: SOM-E406A5
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy seemingly unifacial coin weight for a half guinea of late post-medieval date. The coin weight is square in plan with a thin rectangular cross-section. One side is stamped with the letters P G, above the numerals 2 (doublestruck) and 16; the back is plain. Between the letters, and with its top slightly above is a stamped rectangle with engrailed sides, probably a local maker's mark. The initials and numbers refer to the weight of the object in pennyweights (P 2) and grains (G 16) and refer to the weight of the gold half guinea. Weights with this design and value were iss…
Created on: Monday 28th April 2014
Last updated: Monday 28th April 2014
Spatial data recorded. This findspot is known as 'Milverton CP', grid reference and parish protected.

Record ID: SOM-E64731
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A complete copper-alloy bifacial coin weight, for the Portuguese 'joe' gold coins, issued between AD 1760 and AD 1773. The value of 18 shillings indicated was equivalent to the 'half joe'/2 escudos coin (Withers & Withers 1995, 55). Both faces are marked with a small S above a large 18 above a small 4 . 14 1/2, all within a laurel wreath. This indicates a weight equivalent to that of 18 shillings. The 4 . 14 1/2 stood for the official weight of the coin (4 pennyweights and 14.5 grains). It has a diameter of 19.6mm and is 3.4mm thick. It weighs 6.85g/105.8 grains. As such it is n…
Created on: Monday 28th April 2014
Last updated: Monday 28th April 2014
Spatial data recorded. This findspot is known as 'Milverton CP', grid reference and parish protected.

Record ID: SOM-67D422
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Loop/eye part of a two part cast copper alloy dress fastener of Post-Medieval, 17th century date (AD 1600-1700). The fastener is flat and largely pointed oval in plan with an integral rectangular loop at one end of the main plate and a grooved ornamental knop at the other, reminiscent of a scallop shell. Flanking the beginnings of the ornamental knop is an integral perforated knop to each side. Two further attachment knops protrude from the widest part of the plate, giving a total of four such loops. The front of the plate is decorated with a moulded human facing bust with clusters of…
Created on: Thursday 11th April 2013
Last updated: Thursday 2nd November 2017
Spatial data recorded.

Record ID: SOM-88986D
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval cast copper-alloy dress fastener eye-piece (16-17th century AD). It has an oval plate with three loops for attachment: two at the base, protruding to each side, and one at the other end with small lateral pellets at its base giving the effect of a debased trefoil. There is a debased bifurcated knop midway along the long sides; both are now abraded. An integral rectangular loop emerges from the pair of attachment loops at the base. It has been bent upwards at an angle of around forty degrees. The upper surface of the panel is decorated with a moulded human en-face mask …
Created on: Friday 30th May 2014
Last updated: Wednesday 5th October 2016
Spatial data recorded. This findspot is known as 'Wellington CP', grid reference and parish protected.

Record ID: SOM-1F5DBB
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A slightly damaged post-medieval cast copper-alloy dress fastener hook-piece (16-17th century AD). It has an oval plate with three loops for attachment: two at the base, at its junction with the hook, protruding to each side, and one at the other end with small lateral pellets at its base giving the effect of a debased trefoil. There is a debased bifurcated knop midway along the long sides; both are now abraded. An integral flat rectangular hook emerges from the pair of attachment loops at the base. It curves upwards before an old break which has removed the tip. The upper surface of …
Created on: Wednesday 6th August 2014
Last updated: Tuesday 4th April 2017
Spatial data recorded. This findspot is known as 'Near Wincanton', grid reference and parish protected.

Record ID: PAS-B9606C
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
An incomplete cast copper-alloy dress fastener of post-medieval date (c. 17th century). It has broken at the attachment end such that it cannot be established whether this is a loop or hook part of the two-part fastener. In addition to the break the object has been bent slightly at that end. The object is flat and largely sub-oval, with three integral knops; one at the centre of each side, and one at the centre of the narrower end of the plate. The latter is broken through while the others survive intact; they are perforated and have a small knop on their outer edge. The front of the…
Created on: Friday 13th March 2020
Last updated: Friday 27th March 2020
Spatial data recorded. This findspot is known as 'Cheddar CP', grid reference and parish protected.

Record ID: SOM-BFAD38
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A corroded and slightly abraded copper-alloy post-medieval dress fastener in the form of a scallop. This is the eye section of such fasteners, with its rectangular loop intact. The plate is shallowly convex with incised radiating grooves. The reverse is plain and recessed. At the top of the shell is a circular attachment loop. A further pair are located one either side at the base, one of these had abraded through. A parallel can be found illustrated in Read (2008, 174; ref. 659), slightly more elongated; for a hook-piece of similar proportions see ibid. (2008, 174; ref. 657), there c…
Created on: Tuesday 7th January 2014
Last updated: Saturday 5th January 2019
Spatial data recorded. This findspot is known as 'Ashwick CP', grid reference and parish protected.

Record ID: SOM-7BA565
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval copper-alloy dress fastener, sub lozengiform. This is the eye section of such fasteners, with its rectangular loop intact. The central area of the plate has a raised foliate design with a central quartered berry and four leaves in cross formation with four small circular berries in the angles. This design is within a broadly lozengiform line border formed of four lines with scrolled ends, at the middle corners forming a pair of projecting rounded knops at either side. There are two pierced lobes flanking the hook, one either side. At the opposite end to the hook is a t…
Created on: Friday 11th April 2014
Last updated: Friday 4th January 2019
Spatial data recorded. This findspot is known as 'Milverton CP', grid reference and parish protected.

Record ID: SOM-D4F332
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A damaged and incomplete copper-alloy dress hook dating to the post-medieval period. The object has been cast in one piece with an openwork, moulded upper surface; the lower surface is flat. The attachment loop is all but missing following old damage. The plate features a pair of transverse bars with central rounded bosses. The aperture between the upper bar and the former top would have formed the loop. The aperture between the two bars is dumb bell shaped. The lower bar abuts the base of the plate; there is a small sub-triangular perforation below. At the ends of the bars the sides …
Created on: Monday 22nd July 2013
Last updated: Sunday 23rd February 2014
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.

Record ID: SOM-A17FE0
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A damaged and incomplete copper-alloy dress hook dating to the post-medieval period, missing its hook. The object has been cast in one piece with an openwork, moulded upper surface; the lower surface is flat. The hook has been lost in its entirety following old damage. The plate is sub-circular, with a rectangular bar attached to it at two large circular pellets. The aperture between the bar and the top of the plate would have formed the loop. The plate has a central pellets from which cross arms emerge, the lateral pair protruding beyond the plate's edges. In each quarter created by…
Created on: Wednesday 7th May 2014
Last updated: Wednesday 7th May 2014
Spatial data recorded. This findspot is known as 'Near Wincanton', grid reference and parish protected.

Record ID: SOM-6898F8
Object type: JETTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval copper alloy jetton, Lion of St Mark / imperial orb in tressure type, Nuremberg stock type by anonymous issuer, c. AD 1490-1550, cf. Mitchiner 1998, 360-361
Created on: Thursday 11th April 2013
Last updated: Thursday 11th April 2013
Spatial data recorded.

Record ID: SOM-8FAE87
Object type: JETTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval Nuremberg copper-alloy jetton of the 'Rose / orb' type struck by Hans Krauwinckel II (AD 1586-1635), 'GOTES SEGEN' legend, Mitchiner 1557ff.
Created on: Monday 12th August 2013
Last updated: Friday 1st October 2021
Spatial data recorded.

Record ID: SOM-319AC5
Object type: JETTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
An abraded, incomplete post-medieval Nuremberg copper-alloy jetton of uncertain master of the 'Rose / orb' type, c. AD 1580-1640. Only the part within the inner circle has effectively survived, with ragged breaks all around.
Created on: Friday 14th March 2014
Last updated: Friday 14th March 2014
Spatial data recorded. This findspot is known as 'Carhampton CP', grid reference and parish protected.

Record ID: SOM-321356
Object type: JETTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A corroded and abraded bent late 15th/16th-century copper-alloy Nuremberg post-medieval jetton of the 'ship-penny' type, anonymous issue (c. AD 1490-1550; cf. Mitchiner 1166ff.)
Created on: Friday 14th March 2014
Last updated: Monday 17th March 2014
Spatial data recorded. This findspot is known as 'Carhampton CP', grid reference and parish protected.