Back to simple search | Back to advanced search

    You searched for:

    • Created: Tuesday 16th October 2018
    • Show this many records per page: 40

  • Thumbnail image of PUBLIC-64BC92

Record ID: PUBLIC-64BC92
Object type: WHETSTONE
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete whetstone of probable early-medieval date (c. AD 800 - 1100). Description: The whetstone is formed from a very fine-grained, sedimentary, mica-rich stone. It is sub-trapezoidal in plan with tapering sides and is trapezoidal in cross section although there is significant post-depositional damage that has changed its profile. Both ends are broken, probably in antiquity. Two sides are flat and smooth. The other sides are damaged. Measurements: Length 86.72mm: Width 25.09mm: Thickness 16.29mm: Weight 63.33g Discussion: Dating of whetstones is difficult as they were used fr…
Created on: Tuesday 16th October 2018
Last updated: Monday 22nd October 2018
Spatial data recorded.


  • Thumbnail image of PUBLIC-647D74

Record ID: PUBLIC-647D74
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy thimble of early post-medieval date. Description: The thimble has a tapered body, pointed crown and manually-punched, rectangular pits. The pits on both the body and the crown of the thimble are in a right-hand spiral pattern. The pits on the body begin about one quarter of the way up from the base. Between the pits and the base there is a circumferential groove above a decorated band. The decoration on the band is a pattern of repeated, facing half-annulets. Measurements: Height 18.16mm: Diameter 15.94mm: Weight 2.24g. Discussion: This style of thimble is dated to …
Created on: Tuesday 16th October 2018
Last updated: Monday 22nd October 2018
Spatial data recorded.


  • Thumbnail image of PUBLIC-64689C

Record ID: PUBLIC-64689C
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy double looped buckle c.1350-1650. With just over half of the buckle remaining (29.2mm length and 27.5mm wide) the frame is shallow D-shaped in cross section being rounded on the top and flat on the reverse and waisted adjacent to the narrowed strap bar that has rust traces, indicating an iron pin. The remaining loop is also D-shaped and has a pin notch on the front edge probably more due to wear than design. Thickness 2.3mm and weight 4.2g.
Created on: Tuesday 16th October 2018
Last updated: Sunday 18th November 2018
Spatial data recorded. This findspot is known as 'Worth', grid reference and parish protected.


  • Image not taken

Record ID: NMS-635581
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Medieval sub-rectangular single loop buckle frame. Lateral grooves on expanded outside loop, Extended and narrowed strap bar. Missing pin. Similar to Whitehead, R. Buckles 1250-1800. No.135. Circa AD1350-1400 Length; 17mm, width; 16mm. thickness; 3.9mm. Weight: 2.34g.
Created on: Tuesday 16th October 2018
Last updated: Thursday 15th November 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-62C104
Object type: COIN
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Copper Post Medieval Royal farthing token of James I of England. Lennox type 3. Annulet initial mark. The coin is very thin on one half of the flan and only part of the pressed image survives. It may be an irregular copy. Circa AD1616-1623 Length; 15mm, width; 13.0mm. thickness; 0.4mm. Weight: 0.36g.
Created on: Tuesday 16th October 2018
Last updated: Thursday 15th November 2018
Spatial data recorded.


  • Thumbnail image of SOM-60F39B

Record ID: SOM-60F39B
Object type: KNIFE
Broad period: MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A domed, gilded, cast copper alloy object, possibly a dagger or knife pommel of probable medieval or early post-medieval date, about AD1300 - 1700. The piece is circular in outline and highly domed with angled sides and rounded top. The sides have extensive remains of gilding. The concave back is entirely filled with iron corrosion apart from a small rectangular slot that runs through the corrosion and appears to hold remains of a grained iron substance, either wrought iron or organic material filled with iron corrosion. The copper alloy dome is 19.1mm in diameter, 11.0mm tall and 2.…
Created on: Tuesday 16th October 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded.


  • Thumbnail image of DOR-60BAE9

Record ID: DOR-60BAE9
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A probable copper alloy Royal farthing token of Charles I (1625-1649) dating to c.1636-1649. Crown with sceptres and saltire obverse. Oval flan. Very little detail surviving. Date: Post Medieval. Diameter: 16.05mm. Thickness: 1.85mm. Weight: 1.53g. Die axis:
Created on: Tuesday 16th October 2018
Last updated: Tuesday 23rd October 2018
Spatial data recorded.


  • Image not taken

Record ID: WILT-60ABC7
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A near complete Roman copper alloy hinged Hod Hill brooch, missing only its pin, probably dating to c. AD 43-75. The head of the brooch consists of a sub-rectangular plate rolled over itself to form the wings with a central rectangular slot cut to accommodate a hinged pin; both the pin and axis bar are now lost. The bow of the brooch tapers towards the foot, and is decorated with a longitudinal corded ridge on either edge, flanking a central channel. The foot is offset from the rest of the bow, and is plain. It terminates in a simple knop. An unperforated sub-triangular catchplate proj…
Created on: Tuesday 16th October 2018
Last updated: Thursday 18th October 2018
Spatial data recorded.


  • Thumbnail image of PAS-608E5B

Record ID: PAS-608E5B
Object type: HARNESS FITTING
Broad period: EARLY MEDIEVAL
County: Dorset
Workflow stage: Published Find published
An incomplete late early-medieval cast copper-alloy harness link (c. 11th century AD). The object would have consisted of a central circular plate with boss from which four arms would have emerged, one at each cardinal point; one arm has been lost completely, while another arm now only has a vestigial loop. Integral with the central circle is a high domed boss which is hollow backed. The arms are semicircular in cross-section, with a flat reverse. The surviving loops are oval and bevelled externally. They feature three rounded knops, one at each cardinal point. The object is a red-b…
Created on: Tuesday 16th October 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded. This findspot is known as 'Gussage All Saints CP', grid reference and parish protected.


  • Thumbnail image of DENO-608719

Record ID: DENO-608719
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy sestertius of Commodus (AD 175-192), dating to AD 190 (Reece Period 9). LIB AVG P M TR P XV IMP VIII COS VI S C reverse type depicting Libertas standing left, holding pileus and rod. Mint of Rome. RIC III, p. 430, no. 562.
Created on: Tuesday 16th October 2018
Last updated: Tuesday 13th November 2018
Spatial data recorded.


  • Thumbnail image of YORYM-607909

Record ID: YORYM-607909
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy buckle of Post-Medieval date, circa AD 1550 - 1650. The buckle is a double looped oval with moulded decoration. Just over half of the buckle has been lost to worn breaks. Trilobed, trefoil mouldings are present to the surviving loop and bar terminal. The reverse is flat and undecorated and the pin no longer remains. The metal has a dark green patina and is worn. The buckle is 30.9mm long, 24.5mm wide, 3.3mm thick and weighs 5.3g. A similar example is illustrated in Whitehead, p.65, no.397 and is dated to circa AD 1550 - 1650. Ref: Whitehead, R. (1996). Buc…
Created on: Tuesday 16th October 2018
Last updated: Monday 26th November 2018
Spatial data recorded.


  • Image not taken

Record ID: WILT-606C66
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a Roman copper alloy brooch, probably a Colchester derivative type, dating to c. AD 50-125. The surviving portion comprises of the foot of the brooch, which tapers to an unelaborated point, with an unperforated, sub-triangular catchplate projecting from the reverse. The pin rest curves right. The bow is lost to an old break, it is sub-oval in cross section. Dimensions: 25.6mm; 3.8510.1 2.16g. It is difficult to assign such a small fragment to a specific type, however the form and lack of elaboration of the foot would probably suggest an earlier Colchester derivative, …
Created on: Tuesday 16th October 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded.


  • Thumbnail image of YORYM-605B2F

Record ID: YORYM-605B2F
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: York
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy sword belt hanger buckle of Post-Medieval date, c.AD 1500 -1630. The buckle is a double loop rectangle, though one end has been lost to worn breaks. An integral semi-circular suspension loop projects from one side, above the bar. The sides of the frame are angled and no decoration is present. The metal has a mid-green patina and is worn. The buckle is 38.3mm long, 34.7mm wide, 3.7mm thick and weighs 7.2g. A similar example is illustrated in Whitehead p.76, no.472 and is dated to circa AD 1500 - 1630. The suspension loop on the published example is at right …
Created on: Tuesday 16th October 2018
Last updated: Monday 26th November 2018
Spatial data recorded.


  • Image not taken

Record ID: SOM-6046D0
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval copper alloy 17th-century trade token farthing issued by John Price at Yarmouth on the Isle of Wight, Williamson Hampshire 236, dating to AD 1648 to 1672. Ref: Williamson (1889, 274).
Created on: Tuesday 16th October 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded. This findspot is known as 'Alvediston CP', grid reference and parish protected.


  • Thumbnail image of YORYM-6038EE

Record ID: YORYM-6038EE
Object type: STYLUS
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead-alloy possible stylus of medieval to post-medieval date, c.AD 1200 -1800. The object is square in section tapering to a blunted point at one end and is flat at the other. It is undecorated. The metal has a mid-white patina and is worn. The object is 71.5mm long, 9.6mm wide, 8.9mm thick and weighs 47.8g. Styli of lead are known to have been in use from the Medieval to post-medieval periods and are thought to have been used as often for on-site tasks demanding functional literacy as for more formal writing tasks. Iron and copper alloy styli are more likely to date to th…
Created on: Tuesday 16th October 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded.


  • Image not taken

Record ID: WILT-6030E3
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper alloy Colchester derivative Polden hill type brooch, probably dating to c. AD 80-120. The surviving section comprises of the upper bow and partial head, the rest lost to old breaks. At the head of the brooch only the left wing survives, this is C-shaped in cross-section, with an open reverse and with an incomplete perforated wing cap at its terminal; a separate axis bar and sprung pin are lost. The front of the wing is decorated with alternating parallel, longitudinal ridges and grooves. The brooch is decorated with a central ridge, now abraded, but probabl…
Created on: Tuesday 16th October 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded.


  • Thumbnail image of YORYM-602906

Record ID: YORYM-602906
Object type: SEAL
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead-alloy bag seal of Post-Medieval date, c.AD 1804 - 1968. The seal is circular in plan with a rectangular cross section and is comprised of a single disc of metal which is perforated by a hole running across its diameter. The hole would have been for wire or textile ligatures which were used to secure a bag. The front has a stamped design featuring a circumferential border of raised pellets within which is the text "Carter" in flowing italics. The reverse bears a second circumferential border of raised pellets with the text "LONDON" around the edge. The seal was issued b…
Created on: Tuesday 16th October 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded.


  • Thumbnail image of PAS-602147

Record ID: PAS-602147
Object type: HARNESS FITTING
Broad period: EARLY MEDIEVAL
County: Dorset
Workflow stage: Published Find published
An incomplete late early-medieval cast copper-alloy harness link (c. 11th century AD). The object consists of a central plate with boss; part of one of the terminal loops have been lost. The arms are semicircular in cross-section, with a flat reverse. At what would have been the centre of the complete link there is a low moulded boss with a small knop extending either side of the plate. The boss is solid. The plate terminated at each end in a loop; as noted, one is now vestigial. The other is circular and features three rounded knops, one at each cardinal point. The object is a red-bro…
Created on: Tuesday 16th October 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded. This findspot is known as 'Wimborne St. Giles CP', grid reference and parish protected.


  • Thumbnail image of DOR-601B54

Record ID: DOR-601B54
Object type: JETTON
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy French Jetton issued under Charles VII (1422-1461) of France dating to 1418-1450. Paschal lamb type of Bourges (Berry), obverse GETES SANS FALIR, Paschal lamb, reverse AmES DIEV ET LO, Cross pattee, lis in angles. Minted at Bourges.Reference: Obverse - Mitchiner 1998, pg.199, no.558. Date: Medieval. Diameter: 23.5mm. Thickness: 1.25mm. Weight: 2.39g. Die axis:
Created on: Tuesday 16th October 2018
Last updated: Tuesday 23rd October 2018
Spatial data recorded.


  • Image not taken

Record ID: SOM-60109B
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy radiate of Victorinus or Tetricus I dating to AD 268 to 274 (Reece period 13). Unclear reverse type depicting a standing female figure. Mint unclear.
Created on: Tuesday 16th October 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded. This findspot is known as 'Alvediston CP', grid reference and parish protected.


  • Thumbnail image of HESH-600FE2

Record ID: HESH-600FE2
Object type: VESSEL
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
Eardisland History and Heritage Group Eardisland Excavation 2000-2010 Site Summary: Finds were made during the excavation of a mound in the grounds adjacent to the dwelling: Burton Court Eardisland. The trench in which the majority of artefacts were found measured 5 metres by 3 metres. The stratified assemblage of pottery is of regional importance being especially well preserved and evidence for a domestic non-castle medieval site dating from the twelfth to early thirteenth centuries (1100-1250) Site number:BC 01 Sector: D Context number:107 One body sherd of local Herefordshire …
Created on: Tuesday 16th October 2018
Last updated: Friday 19th October 2018
Spatial data recorded.


  • Thumbnail image of SOM-600101

Record ID: SOM-600101
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy irregular (barbarous) radiate coping a coin of the deified Claudius II Gothicus (268-270) dating to AD 275-285 (Reece period 14). CONSCRATIO reverse type depicting an eagle standing left, head turned to right, mint unclear, cf Cunetio no.2877.
Created on: Tuesday 16th October 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded. This findspot is known as 'Alvediston CP', grid reference and parish protected.


  • Thumbnail image of HESH-5FFBD3

Record ID: HESH-5FFBD3
Object type: VESSEL
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
Eardisland History and Heritage Group Eardisland Excavation 2000-2010 Site Summary: Finds were made during the excavation of a mound in the grounds adjacent to the dwelling: Burton Court Eardisland. The trench in which the majority of artefacts were found measured 5 metres by 3 metres. The stratified assemblage of pottery is of regional importance being especially well preserved and evidence for a domestic non-castle medieval site dating from the twelfth to early thirteenth centuries (1100-1250) Site number: BC 01 Sector: D Context number: 105 An abraded flat base sherds which co…
Created on: Tuesday 16th October 2018
Last updated: Friday 19th October 2018
Spatial data recorded.


  • Thumbnail image of YORYM-5FF6F1

Record ID: YORYM-5FF6F1
Object type: WEIGHT
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead-alloy weight of uncertain date. The object is circular with a flat top and base and a central perforation running through it. All surfaces appear undecorated and are worn. The metal has a mid-yellow/grey patina. The object is 32.1mm in diameter, 11.3mm thick and weighs 69g. The perforation is 9.5mm in diameter. The term 'weight' is used here in its broadest sense to include uses that do not involve weighing (e.g. holding-down, tensioning, etc.). They were commonly used from the Iron Age through to the post-medieval period and are difficult to date with any certainty w…
Created on: Tuesday 16th October 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded.


  • Thumbnail image of NARC-5FF54F

Record ID: NARC-5FF54F
Object type: FURNITURE FITTING
Broad period: UNKNOWN
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy Mount (furniture) of Post-Medieval date (AD 1700-1900). The object is composed of a four lobed flat plate with a central perforation, through which a tapering shaft component passes. The shaft expands to either side of the plate with the back portion being formed of an expanded lobed with a small circular central spur. The opposing end expands to a circular lobe beyond which is an integral loop through which is a ring. The plate retains traces of rivets on each of the four lobes. The metal had a pitted brown patina. Plate: Length: 44.14mm, Width: 20.79mm, Thic…
Created on: Tuesday 16th October 2018
Last updated: Wednesday 14th November 2018
Spatial data recorded.


  • Image not taken

Record ID: SOM-5FEF0A
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy radiate, of unclear emperor dating to AD 260-285 (Reece period 13 or 14). Unclear reverse type. Unclear mint.
Created on: Tuesday 16th October 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded. This findspot is known as 'Alvediston CP', grid reference and parish protected.


  • Thumbnail image of HESH-5FED3C

Record ID: HESH-5FED3C
Object type: VESSEL
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
Eardisland History and Heritage Group Eardisland Excavation 2000-2010 Site Summary: Finds were made during the excavation of a mound in the grounds adjacent to the dwelling: Burton Court Eardisland. The trench in which the majority of artefacts were found measured 5 metres by 3 metres. The stratified assemblage of pottery is of regional importance being especially well preserved and evidence for a domestic non-castle medieval site dating from the twelfth to early thirteenth centuries (1100-1250) Site number: BC 01 Sector: D Context number: 105 12 abraded body sherds of Worcester …
Created on: Tuesday 16th October 2018
Last updated: Friday 19th October 2018
Spatial data recorded.


  • Thumbnail image of YORYM-5FDCC2

Record ID: YORYM-5FDCC2
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy strap fitting of medieval date, circa AD 1150 - 1450. The fitting comprises an ovate frame with a large single collared knop extending to the outer curved edge. The opposite edge is flattened, narrowed and recessed to form a bar. The metal has a dark green patina and is worn. The fitting is 19.8mm long, 13.3mm wide, 5.3mm thick and weighs 1.9g. A similar fitting is illustrated in Egan and Pritchard, p.221, fig.138, no.1192 and is described as a pendant loop which would have been suspended from a bar mount.
Created on: Tuesday 16th October 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded.


  • Thumbnail image of NARC-5FDAFF

Record ID: NARC-5FDAFF
Object type: SLAG
Broad period: UNKNOWN
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A piece of Slag, Clinker or other similar industrial by-product of uncertain date (800 BC - AD 1800). The object is rough and irregular, with bubbles and cavities, and it has low density. The object is a grey green colour with obvious metallic particles. Length: 24.73mm, Width: 17.58mm, Thickness: 6.79mm, Weight: 9.1g.
Created on: Tuesday 16th October 2018
Last updated: Wednesday 14th November 2018
Spatial data recorded.


  • Thumbnail image of HESH-5FCAB2

Record ID: HESH-5FCAB2
Object type: VESSEL
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
Eardisland History and Heritage Group Eardisland Excavation 2000-2010 Site Summary:Finds were made during the excavation of a mound in the grounds adjacent to the dwelling: Burton Court Eardisland. The trench in which the majority of artefacts were found measured 5 metres by 3 metres. The stratified assemblage of pottery is of regional importance being especially well preserved and evidence for a domestic non-castle medieval site dating from the twelfth to early thirteenth centuries (1100-1250) Site number: BC 01 Sector: C Context number: 105 One unabraded rim sherds of Worcester…
Created on: Tuesday 16th October 2018
Last updated: Friday 19th October 2018
Spatial data recorded.


  • Image not taken

Record ID: SOM-5FC123
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy coin, possibly a radiate, of unclear emperor dating to AS 260-285 (Reece period 13 or 14). Unclear type. Unclear mint.
Created on: Tuesday 16th October 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded. This findspot is known as 'Alvediston CP', grid reference and parish protected.


  • Thumbnail image of NARC-5FAA9B

Record ID: NARC-5FAA9B
Object type: COIN
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Nummus of the House of Constantine dating to the period AD 330-335. Reece Period 17. Reverse type depicting Victory left on prow with spear in right hand and shield in right. Uncertain mint. Diameter: 17.42mm, Thickness: 1.47mm, Weight: 1.5g. The coin is missing portions of its outer flan.
Created on: Tuesday 16th October 2018
Last updated: Wednesday 14th November 2018
Spatial data recorded.


  • Thumbnail image of SOM-5FAA45

Record ID: SOM-5FAA45
Object type: STRAP END
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Published Find published
An almost complete, but damaged, medieval copper-alloy strap-end dating to c. 1275 to 1400. The strap-end consists of two pieces of copper-alloy sheet forming front and back plates. The sheets are long and trapezoidal; they end in a rounded lobe and then a trefoil- or cross-like shape. These last two terminal elements are separated from each other and from the main body of the strap end by a narrowed waist. The two sheets are fixed together with a copper-alloy rivet in situ, at the lobed terminal. There is another rivet hole through each plate at the opposite (attachment) end, but the…
Created on: Tuesday 16th October 2018
Last updated: Friday 2nd November 2018
Spatial data recorded.


  • Thumbnail image of NARC-5F9DF6

Record ID: NARC-5F9DF6
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy Furniture Mount of Post Medieval date (1600-1800 AD). The mount is most likely the back plate for a drawer or cupboard handle. The object is a flat circular disk with an integral raised decorative pattern. The object has a single central sub-ovate aperture which is worn. The upper face of the mount is decorated with eight short decorative ridges radiate from the aperture, and there are 4 evenly spaced pellets between every other pair of ridges, alternating with what may be small relief fleurs-de-lis. Eight evenly spaced pellets around the circumference are align…
Created on: Tuesday 16th October 2018
Last updated: Wednesday 14th November 2018
Spatial data recorded.


  • Image not taken

Record ID: SOM-5F9BF4
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy nummus of Theodora dating to AD 337 to 341 (Reece period 17). PIETAS ROMANA reverse type depicting Pietas standing cradling one child. Unclear mint.
Created on: Tuesday 16th October 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded. This findspot is known as 'Alvediston CP', grid reference and parish protected.


  • Thumbnail image of HESH-5F9BDE

Record ID: HESH-5F9BDE
Object type: VESSEL
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
Eardisland History and Heritage Group Eardisland Excavation 2000-2010 Site Summary: Finds were made during the excavation of a mound in the grounds adjacent to the dwelling: Burton Court Eardisland. The trench in which the majority of artefacts were found measured 5 metres by 3 metres. The stratified assemblage of pottery is of regional importance being especially well preserved and evidence for a domestic non-castle medieval site dating from the twelfth to early thirteenth centuries (1100-1250) Site number: BC 01 Sector: D Context number: 105 One body sherd of Malvern Chaseware …
Created on: Tuesday 16th October 2018
Last updated: Friday 19th October 2018
Spatial data recorded.


  • Thumbnail image of YORYM-5F90E8

Record ID: YORYM-5F90E8
Object type: COIN
Broad period: POST MEDIEVAL
County: Redcar and Cleveland
Workflow stage: Awaiting validation Find awaiting validation
A silver washed copper-alloy contemporary copy of a sixpence of Charles I dating to the period AD 1625 - 1649. Square shield over cross reverse. Uncertain initial mark. Mint uncertain. The coin has been pierced at 3 o'clock on the obverse.
Created on: Tuesday 16th October 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded.


  • Thumbnail image of NARC-5F8FF5

Record ID: NARC-5F8FF5
Object type: SHOT
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead or lead alloy Shot of Post-Medieval date (AD 1640-1750). The object is spherical with a shallow circumferential casting seam and a small casting spru. The ball displays possible minor signs of impact damage. The metal is cream in colour with a pitted and corroded patina The weight of the ball suggests that it was meant to be fired from a pistol Diameter: 13.74mm, Weight: 10.7g. DF Harding, 2012, Lead Shot of the English Civil War: A Radical study Foresight Publications, London
Created on: Tuesday 16th October 2018
Last updated: Wednesday 14th November 2018
Spatial data recorded.


  • Thumbnail image of DENO-5F8BE9

Record ID: DENO-5F8BE9
Object type: COIN
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy Roman quadrans of Trajan (AD 98-117), dating to the period AD 98-117 (Reece Period 5). S C reverse type depicting club. Mint of Rome. RIC II, p. 293, no. 699.
Created on: Tuesday 16th October 2018
Last updated: Monday 10th December 2018
Spatial data recorded.


  • Thumbnail image of SOM-5F882F

Record ID: SOM-5F882F
Object type: COIN
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy contemporary copy of a nummus of the House of Constantine, dating to AD 330 to 335 (Reece period 17). VRBS ROMA type with reverse depicting a wolf suckling twins with two stars above.
Created on: Tuesday 16th October 2018
Last updated: Tuesday 16th October 2018
Spatial data recorded. This findspot is known as 'Alvediston CP', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 195
Search server index: valhalla

You are viewing records: 1 - 40.

Search statistics

  • Total quantity: 301
  • Mean quantity: 1.544
  • Maximum: 61

Filter your search

1 - 40 of 195 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.