Back to simple search | Back to advanced search

    You searched for:

    • Created: Friday 28th September 2018

  • Image not taken

Record ID: NMS-E3BECE
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Fragment of Medieval rectangular double-looped buckle frame, edge decorated with baluster mouldings and parts of sides and narrowed central bar with flat-sectioned copper alloy pin. Extant length 23mm. Width 37mm. A very similar example from London has been dated to the middle of the 13th century. (Fingerlin 1971, Abb. 44 Kat. Nr. 292). Perhaps a 15th-century date is more likely. Cf. also Whitehead 2003 no. 477, dated c.1450 - 1600.
Created on: Friday 28th September 2018
Last updated: Friday 28th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-E37C28

Record ID: NLM-E37C28
Object type: JETTON
Broad period: POST MEDIEVAL
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy jetton. Milled Nuremburg jetton of Hans Krauwinckel II (1585-1635). Obverse description: Central rosette surrounded by three crowns alternating with three lis. Obverse inscription: *HANNS KRAVWINCKEL IN NVR Reverse description: Reichsapfel. Reverse inscription: *GO[--]ALLEIN.DIE.BERES Diameter: 21.0mm, Weight: 0.66gms, die axis: 12
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
No spatial data available.


  • Thumbnail image of NLM-E37508

Record ID: NLM-E37508
Object type: LITHIC IMPLEMENT
Broad period: NEOLITHIC
Workflow stage: Awaiting validation Find awaiting validation
Grey flint with cortex spot, lithic implement. An irregular star-shaped flake with broad flakes struck from its dorsal side, and with an almost flat ventral surface. This initial working was followed by the development of a misty patina suggesting a period of exposure to a calcareous environment. The flake was reused, as evidenced by the trimming of patinated surfaces by short abrupt retouch executed from the dorsal aspect following the edges of the object, and by more limited angled scalar retouch of the initially ventral surface executed from the ventral aspect. Light crushing occurs…
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
No spatial data available.


  • Thumbnail image of NLM-E36AF0

Record ID: NLM-E36AF0
Object type: CORE
Broad period: MESOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Grey flint core, as kindly identified by the finder. A pyramidal or columnar core with long narrow parallel flakes removed almost all around by unidirectional working from a flat striking platform. A limited patch of patina may suggest the nodule had previously been exposed for a period to a calcareous environment. Suggested date: Late Mesolithic, 7000-4000 BC. Height: 31.6mm, Width: 23.4mm, Thickness: 17.3mm, Weight: 13.92gms
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.


  • Thumbnail image of NLM-E35ED9

Record ID: NLM-E35ED9
Object type: SCRAPER (TOOL)
Broad period: BRONZE AGE
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Grey flint with cortex patches, scraper. A thick chunk with large broad parallel flakes struck from its dorsal side by hard hammer, and with its opposite side [not here characterised as ventral as cortex remains on both the sides] stripped by multangular hard hammer working similarly removing large parallel flakes. The appearance of finer retouch probably arises from edge-on impacts and localised crushing of edges may arise from use of the tool. Suggested date: Early Bronze Age, 2350-1600 BC. Length: 51mm, Width: 48.9mm, Thickness: 19.8mm, Weight: 59.72gms
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.


  • Thumbnail image of NLM-E354CD

Record ID: NLM-E354CD
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy dress hook or hooked tag, of Read Class E Type 2, as kindly identified by the finder. A straight-sided tag with a rectangular loop incorporated in the design of an openwork plate, which features two transverse bars with a pair of devices resembling heraldic ermine tails between them. A collar flanked by knops divides the plate from a short backward-pointing hook whose tip is lost. Suggested date: Post-Medieval, 1500-1600. Length: 27.9mm, Width: 15.1mm, Thickness (at collar): 1.9mm, Weight: 1.87gms
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-E348B2

Record ID: NLM-E348B2
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy dress hook or hooked tag fragment of Read early post-medieval Class E type 3, as kindly identified by the finder. A cast concavo-convex plate with a trapezoid loop above; the hook is lost. The plate bears a moulded floral design resembling a Tudor rose. Suggested date: Post-Medieval, 1500-1600. Length: 21.5mm, Width: 15.3mm, Thickness: 1.4mm, Weight: 2.06gms
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-E33D12

Record ID: NLM-E33D12
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy unidentified object. The finder kindly suggests this to be an umbonate plate brooch. However, there is neither fastening gear nor traces of its loss, while the form is smaller than, and also differs in other detail from, plate brooches of this appearance featured in Mackreth's 2011 corpus. The object is a cast circular concavo-convex plate with seven hemispherical knops equidistantly spaced around its edge, the display face retaining white metal plating overall. The possible stub of a fixing appears centrally in the hollow back. Possibly burnt, with damage more apparent on…
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-E322FE

Record ID: NLM-E322FE
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch. Cast Colchester derivative brooch, Mackreth type CD RH 4.k. Plain semi-circular wings, open behind and with solder traces at one end woithin, are clasped by a plain bow of rounded section which is surmounted by a rearward facing hook. The bow tapers to a plain foot with a folded catch plate pierced by a small [diameter 1.5mm] hole. The rearhook fastening is associated with the Iceni tribe, and this type may pre-date the Boudiccan revolt of AD61, which was followed by severe reprisals and probably a diaspora of the survivors. Suggested date: Early Roman, 50-60 Leng…
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-E31634

Record ID: NLM-E31634
Object type: BELL
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy bell. A sub-spherical one-piece rumbler bell formed from copper alloy sheet with four triangular leaves crimped together to enclosed a separate clapper, possibly of iron (though testing with a magnet was unproductive, so possibly lost to corrosion), at the end of a long stalk made by rolling the sheet and hammering it flat; a suspension hole of diameter 2.4mm is set at the end of the stalk. Extensive traces of gilding remain overall. The finder kindly cites NLM-F22938 as a parallel. Suggested date: Medieval, 1300-1400. Length: 23.2mm, Diameter (bell): 13.3mm, Thickness (a…
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.


  • Thumbnail image of NLM-E30D04

Record ID: NLM-E30D04
Object type: RING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy ring. A small round section ring. Suggested date: Post-Medieval, 1800-1900. Diameter: 18.8mm, Band Thickness: 1.4mm, Weight: 0.71gms
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-E30425

Record ID: NLM-E30425
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Lead metal working debris. Two small fragments of lead melt: one has congealed on a flat and possibly sanded surface; the other has been dribbled onto a sanded surface and has set around a small protruding object. The former is unpatinated, the latter heavily patinated, so discrete episodes are represented. Suggested date: Unknown, 43-1800 Combined Weight: 40.27gms
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-E2FC40

Record ID: NLM-E2FC40
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy furniture fitting. A possible lock fitting or escutcheon from an item of furniture, with an open die-stamped trefoil frame on a short stalk below a triangular plate with a small round loop at the top. Crisp stamped decoration of billeting and scrolls appears on the frame. Bent. Suggested date: Post-Medieval, 1800-1900. Length (as found): 28mm, Width: 17.6mm, Thickness:1.6mm, Weight: 2.47gms
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-E2F368

Record ID: NLM-E2F368
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy vessel repair patch. A straight-sided strip of sheet metal of thickness 0.5mm, sharply folded thrice to form a repair clip for a wooden vessel. Traces of black paint, lacquer or oil appear on the folded side of the object, and are a characteristic feature of early post-medieval metalwork, which was often treated with linseed oil. Abraded. Suggested date: Post-Medieval, 1500-1650. Length: 19.4mm, Width: 12.9mm, Thickness (overall): 2.1mm, Weight: 1.58gms
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-E2E95C

Record ID: NLM-E2E95C
Object type: MOUNT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy mount fragment. Cast fragment from a trefoil mount with a central aperture of diameter 5.3mm-4.2mm, wider where it is countersunk ?behind, and with two similar partial apertures to either side. Probably part of a fleur de lis or an arched pendent form; the holes are probably part of an openwork design rather than fixing points. Suggested date: Late Medieval, 1350-1400. Length: 19.1mm, Height: 12.1mm, Thickness: 2.6mm, Weight: 1.20gms
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-E2DF42

Record ID: NLM-E2DF42
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy buckle. Cast single looped buckle frame with three knops on short stalks attached at the angles of the outer edge of a frame with a narrowed and offset strap bar. The knops take the form of mushroom-shaped plano-convex bosses [diameter 5mm] on straight stalks [of overall length5.5mm], and the bases of the stalks are burred by hammering at the back of the frame (cf. Whitehead 1996 no. 110, though that example has the knops integrally cast rather than attached). Twisted, with the loss of one knop leaving a torn hole. Suggested date: Medieval, 1250-1400. Length: 25.9mm, Heig…
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Image not taken

Record ID: SF-E2D6A4
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy nummus of Crispus (AD 317-26), dating to c. AD 317 (Reece Period 15). Reverse: SOLI INVICTO COMITI, Sol standing left with globe, raising right hand. Mint of London. C.f RIC VII, p. 104, no. 115.
Created on: Friday 28th September 2018
Last updated: Friday 28th September 2018
Spatial data recorded. This findspot is known as 'West Stow', grid reference and parish protected.


  • Thumbnail image of NLM-E2D6AB

Record ID: NLM-E2D6AB
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy probable buckle plate fragment. Rectangular sheet metal strip, sharply constricted at one end, presumably where it would clasp a buckle frame [lost]. One side is thickly coated with black paint, lacquer or oil; a little of the black material has intruded onto the reverse. Suggested date: Medieval, 1250-1400. Length: 24.6mm, Height: 13mm, Thickness: 0.8mm, Weight: 1.33gms
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-E2CBE6

Record ID: NLM-E2CBE6
Object type: MOUNT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy mount. Rectangular billet of sheet metal of thickness 0.4mm with a rivet of diameter 1.7mm and length 2.7mm passing through either end, lightly burred on the display face of the sheet. Suggested date: Medieval, 1250-1400. Length: 24.8mm, Width: 9.8mm,Thickness: 0.4mm, Weight: 0.95gms
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-E2C329

Record ID: NLM-E2C329
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Lead bale or cloth seal. A flat cast disc linked to a slightly larger disc at a common edge with a central hole of diameter 9mm punched through its middle. The larger disc bears stamped characters at its edge on one side, possibly NA/F. The smaller disc bears the letters L / VIF. Patinated. Suggested date: Post-Medieval, 1750-1850 Length: 34.9mm, Width: 19.2mm, Thickness: 1.4mm, Weight: 5.95gms
Created on: Friday 28th September 2018
Last updated: Monday 1st October 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


1 - 20 of 44 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.