Record ID: SUR-6A7DDA
Object type: BLADE
Broad period: BRONZE AGE
County: Surrey
Workflow stage: Awaiting validation
A cast copper alloy fragment, 34.7mm in length and narrowing from 16.1mm to 11.9mm. The wide end is square and faceted; the remainder of the fragment has an asymmetric trapezoidal profile, with a prominent ridge up to 4.6mm thick down one side of the front. The rear is flat and the object demonstrates a slight curve. The flat back and asymmetrical profile suggest this to possibly represent a fragment of a Bronze Age tool such as a sickle or knife blade.
Created on: Wednesday 29th August 2018
Last updated: Friday 3rd November 2023
Spatial data recorded.

Record ID: SUR-6A5078
Object type: POWDER MEASURE
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
Lead alloy powder measure, 22.8mm in diameter and 17.8mm high. The measure has two small loops at the base, now folded flat against the sides. There is a moulded seam down one side and around the base. The object is crushed and distorted and the rim is damaged.
Created on: Wednesday 29th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.

Record ID: SUR-6A06B6
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
Lead alloy cloth or bag seal. One side is stamped with a crest or design featuring two cockerals facing each other over a flower or a thistle with a pair of leaves radiating underneath to either side. There is lettering over this design which appears to read "p b g", however it is highly stylised. The reverse is stamped with a capital B.
Created on: Wednesday 29th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.

Record ID: SUR-69EF15
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
Conical weight 28.1mm in length and 27.5mm wide with a central hole in the flat end surrounded by a recessed lip around 2mm wide. This hole contains a copper alloy pin running down its centre, suggesting a fixing to some sort of shaft or handle.
Created on: Wednesday 29th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.

Record ID: SUR-69D0CA
Object type: STUD
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
Post Medieval copper alloy hexagonal stud with triangular profile, flat back and single large fixing lug. The face is 15.2mm wide and is capped with a small boss 3.9mm wide, surmounting six facets, each decoraterd with a curl of chased decoration, so the overall effect is that of a flower with six petals. There is an undecorated border 1,9mm in width around the edge. Circa 17th century.
Created on: Wednesday 29th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.

Record ID: SUR-69A7A1
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
Lozenge shaped cast copper alloy button with integral drilled shank. The button is 9.8mm wide with a pyramid shaped front and flat back; the shank is 8.8mm in length, with a rectangular section and oval shaped loop. The front is quarted with a saltire with each face carrying trefoils on traces of a black paint or niello field. As Read (2005), p30 number 96. Late 15th-16th century.
Created on: Wednesday 29th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.

Record ID: SUR-6983E9
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
Fragment of a large copper alloy double loop oval buckle frame, 42.5mm in length, with a pointed diamond shaped knop on the outer edge. The buckle is convex in profile with a concave rear. Circa 16th-17th century.
Created on: Wednesday 29th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.

Record ID: SUR-695104
Object type: BELL
Broad period: MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
Medieval copper alloy rumbler bell, 17.3mm in diameter. The bell is composed of two semispherical halves joined at the midsection by a raised seam; there is a suspension loop of folded sheet metal, 4.9mm wide, inserted into the top. The bell is decorated with incised concentric circles running parallel to the seam. Much of the lower portion of the bell, which once had a sounding slit with a circular hole at each end, has been lost.
Created on: Wednesday 29th August 2018
Last updated: Wednesday 29th August 2018
Spatial data recorded.

Record ID: SUR-690412
Object type: THIMBLE
Broad period: MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
Copper alloy dome thimble, 13.7mm in length, with round indentations which run in a spiral around the sides. There is an undecorated tonsure 7.3mm wide, which has a small pierced hole in the centre. There is a simple moulded linear border around the open end. The thimble is crushed and distorted.
Created on: Wednesday 29th August 2018
Last updated: Thursday 20th December 2018
Spatial data recorded.

Record ID: SUR-68EF8F
Object type: THIMBLE
Broad period: MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
Late Medieval or Post Medieval copper alloy dome thimble, 23.9mm in length, with triangular or wedge shaped indentations which are arranged concentrically. There is a moulded collar around the open end composed of two linear borders encompassing a plain band decorated with four 2mm wide six petalled flowers, spaced 90 degrees apart. Circa 15th-16th century.
Created on: Wednesday 29th August 2018
Last updated: Wednesday 29th August 2018
Spatial data recorded.

Record ID: SUR-6617F7
Object type: LITHIC IMPLEMENT
Broad period: NEOLITHIC
County: Surrey
Workflow stage: Awaiting validation
Plano convex struck flint flake, 41.9mm in length. One side demonstrates working, the other is flat, with a single bulb of percussion. There is evidence for a striking platform demonstrating removal from a core at the thick end. There is no evidence of subsequent retouch, suggesting use as a simple cutting flake. The tip has broken off.
Created on: Wednesday 29th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.

Record ID: SUR-65F92A
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
Post Medieval cast copper alloy single loop sub rectangular buckle, 36.4mm in length, with narrowed strap bar. The frame has concave sides and a pointed notched pin rest. There are tear shaped mouldings on the corners of the frame. A rusted remnant of an iron pin remains curled around the bar, however the majority has been lost. Circa 16th century.
Created on: Wednesday 29th August 2018
Last updated: Thursday 30th August 2018
Spatial data recorded.