Record ID: CORN-B008ED
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
A cast copper alloy double-loop buckle with trapezoidal frame. The buckle is 35 mm long and 22 mm wide and 2.6 mm thick. The frame has trefoil outer edges and small worn knops at each end of the strap bar which is bevelled and 2.7 mm wide but flush with the frame. The inner edges of both ends of the frame are vertical and the faces are decorated with an incised transverse line. The outer edges of the frame have central pointed knops with transverse grooves as pin rests and ovoid knops at the corners. The pin is wrapped around the pin bar but missing sections of its outer layer and is …
Created on: Monday 20th August 2018
Last updated: Sunday 26th August 2018
Spatial data recorded.

Record ID: KENT-AD9A96
Object type: COIN
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A double-struck, worn and abraded silver Halfpenny of Henry VIII (1509-1547), Second coinage of 1526-1544 AD. Issued at Canterbury by Archbishop William Warham. North (1991) No. 1816. Reverse shows some ghosting from a double striking error. Measurements: 11.62mm in diameter, 0.75mm thick and weighs 0.4g.
Created on: Monday 20th August 2018
Last updated: Friday 24th August 2018
Spatial data recorded.

Record ID: SOM-AD812E
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
An incomplete Post-Medieval cast copper alloy plate of a double loop shoe or knee buckle, dating to AD 1660 to 1720. The chape is D-shape with the centre of the curve projecting into an elongated knop which would have a raised stud at the end, now missing. It measures 20.0 mm in length and 11.8 mm in width where holds a copper alloy strap bar in situ. The pin is now missing but it was probably made of iron, as suggest traces of iron corrosion around the bar, on both sides of the plate. The reverse is plain. The plate measures 20.0 mm in length, 11.8 mm in width, 1.6 mm in thickness…
Created on: Monday 20th August 2018
Last updated: Sunday 2nd September 2018
Spatial data recorded.

Record ID: IOW-AD5064
Object type: KEY (LOCKING)
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
An incomplete and misshapen post-Medieval copper-alloy rotary key, possibly for a casket (c. 1500-c. 1700). Most of the bow is missing and the bit is misaligned from the stem. The handle/bow would probably have been kidney-shaped when intact. All that survive of the bow are two internal projections adjacent to the stem and a tiny portion of the bow. The stem is circular in cross-section. Between the bow and solid stem there are four parallel moulded collars all about the same size. The clefts and wards on the rectangular bit form an 'S' shape. The metal is finely pitted an…
Created on: Monday 20th August 2018
Last updated: Tuesday 21st August 2018
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: KENT-AD3C5C
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
A complete cast lead and iron mount probably of post-Medieval date. Description: The mount is circular in plan with moulded relief decoration in the form of a lion's head surrounded by its mane. The reverse is uneven with the remnants of two u-shaped iron pins or studs overlapping and embedded in it. The function of this object is unknown. The metal is a light grey colour and is worn. Measurements: 31.5mm in diameter, 13.55mm thick and 50.81g in weight. Discussion: A number of similar objects are known fromt he PAS e.g: LIN-66994E, LVPL-F93881 and YORYM-0E94A7. Many of these …
Created on: Monday 20th August 2018
Last updated: Friday 24th August 2018
Spatial data recorded.

Record ID: DENO-ACB0CE
Object type: JETTON
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A copper alloy Nuremburg rose/orb jetton of Hans Krauwinkle II, dating to 1586-1635. Mitchner 1553-1573.
Created on: Monday 20th August 2018
Last updated: Friday 18th January 2019
Spatial data recorded.

Record ID: SWYOR-AC5002
Object type: JETTON
Broad period: POST MEDIEVAL
County: Rotherham
Workflow stage: Awaiting validation
A Post Medieval copper alloy Jetton of the Rose/orb type issued by Hans Krauwinckel II dating from AD 1586 - 1635. It is an example of Mitchiner (1988) no. 1504 with master's name around orb, small size. The jetton is very worn, and much of the legend is illegible. The jetton has a diameter of 19.4mm diameter, is 0.5mm thick and weighs 0.7g. Mitchiner, M., (1988) Jetons, Medalets & Tokens, the Medieval Period & Nuremberg London , B A Seaby Ltd.
Created on: Monday 20th August 2018
Last updated: Thursday 23rd August 2018
Spatial data recorded.

Record ID: DOR-AC40A8
Object type: BELL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
An incomplete copper alloy crotal bell. The bell comprises two hemispherical domes divided horizontally by a circumferential ridge. The upper hemisphere has two circular sound holes. An angular integrally cast suspension loop with off-centre drilled hole projects from the apex of the upper dome. The lower hemisphere has a long, thin sound slit with circular holes at the ends and has a broken hole at one side. The inner iron ball or clapper is in situ. Both hemispheres are decorated. The upper hemisphere has a series of incised flaring ovals set vertically. The lower hemisphere retains…
Created on: Monday 20th August 2018
Last updated: Tuesday 21st August 2018
Spatial data recorded.

Record ID: SWYOR-AC0512
Object type: COIN
Broad period: POST MEDIEVAL
County: Rotherham
Workflow stage: Awaiting validation
A post-Medieval silver coin: a Scottish twenty pence piece of Charles I (AD 1625 - 1649), third coinage (AD 1637 - 1642). See Spink number 5587 or 5588 on page 84. The coin is 15.9mm in diameter, 0.5mm thick and weighs 0.7grams.
Created on: Monday 20th August 2018
Last updated: Thursday 23rd August 2018
Spatial data recorded.

Record ID: DOR-ABE993
Object type: DAGGER
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A copper alloy dagger pommel with lead infill. A domed circular pommel with a rectangular slot at the top to accomodate the tang of the missing blade. The underside is open with the sides tapered in and slightly waisted. In the hollow are remnants of lead infill to weight the pommel to balance the missing blade. The domed top is decorated with a series of incised lines radiating towards the edge.The sides below are decorated with two rows of short incised diagonal lines. Date: Late Medieval to Post Medieval - c. 1480 - 1550 (Ed Wood, pers. comm.) Dimensions: 30.79 mm x 18.39 mm, Wall…
Created on: Monday 20th August 2018
Last updated: Tuesday 21st August 2018
Spatial data recorded.

Record ID: SWYOR-ABD915
Object type: COIN
Broad period: POST MEDIEVAL
County: Rotherham
Workflow stage: Awaiting validation
A Post-medieval silver coin: a half groat of Charles I (AD 1625 - 49), probably fourth bust, group D, probable star initial mark dating from AD 1640 - 41. It is 16.4mm diameter, 0.7mm thick and 1g. Reference: North, volume 2, page 162, number 2258.
Created on: Monday 20th August 2018
Last updated: Thursday 23rd August 2018
Spatial data recorded.

Record ID: SWYOR-ABCB31
Object type: COIN
Broad period: POST MEDIEVAL
County: Rotherham
Workflow stage: Awaiting validation
A post-Medieval silver coin: a Scottish twenty pence piece of Charles I (AD 1625 - 1649), third coinage (AD 1637 - 1642). See Spink number 5588 on page 84. The coin has a diameter of 16mm, is 0.6mm thick and weighs 0.7grams.
Created on: Monday 20th August 2018
Last updated: Thursday 23rd August 2018
Spatial data recorded.

Record ID: DOR-ABBFE5
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
An incomplete copper alloy button. The button is circular with a convex front and concave back. The front of the button is decorated with design of incised lines, punched annulets and crescents. The design comprises an incised equal-armed cross with a central ring and dot and infill in the angles of small stamped annulets towards the centre and groups of stamped crescents (a line of three along the edge with two more forming an arch over the central crescent). A broken central integral rectangular shank projects from the reverse, with a circular drilled perforation. Date: Post Medieval…
Created on: Monday 20th August 2018
Last updated: Friday 24th February 2023
Spatial data recorded.

Record ID: SWYOR-AB975D
Object type: COIN
Broad period: POST MEDIEVAL
County: Rotherham
Workflow stage: Awaiting validation
A post-medieval coin; a silver half groat of Elizabeth I (AD 1558-1603), Third issue (AD 1583 - 1603), Initial mark hand dating from AD 1589 - 1592. Mint of London. North (Volume II, 1991, page 137) number 2016. It is 17mm diameter, 0.7mm thick and 1.1g.
Created on: Monday 20th August 2018
Last updated: Thursday 23rd August 2018
Spatial data recorded.

Record ID: DOR-AB9601
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
An incomplete copper alloy buckle frame. One D-shaped loop and the centre bar only remaining. The frame is D-shaped in cross section. The front face is decorated with a moulded rosetted at the point in the outer edge (a central pellet with seven set around it in a cricle. There is a rounded knop on each side of the loop. The bar is narrowed fron the frame with a D-shaped cross section. At either end of the bar is an acorn-shaped knop. Date: Post Medieval - c. 1550 - 1650 Dimensions: 32.40 mm x 36.66 mm x 2.80 mm Weight: 7.46 g A similar buckle is recorded in Whitehead, R, 1996, Buck…
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.

Record ID: SWYOR-AB75B0
Object type: COIN
Broad period: POST MEDIEVAL
County: Rotherham
Workflow stage: Awaiting validation
A Post Medieval incomplete silver coin; probably a threepence of Elizabeth I (AD 1558 - 1603), second issue (AD 1561 - 1582), dating from the 1570s. See North (1991) Volume 2, number 1998.The coin is incomplete and very worn, but the rose behind the bust is visible. The coin is 17.7mm long, 15mm wide and 0.8mm thick. 0.8g. About a third of the coin is missing.
Created on: Monday 20th August 2018
Last updated: Wednesday 22nd August 2018
Spatial data recorded.

Record ID: DOR-AA9F7C
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A silver threepence of Elizabeth I (1558 - 1603) dating to 1582. Mint of London. Reference: North Vol 2, 1998 Date: Post Medieval Diameter: 18.83 mm Weight: 1.00 g Die axis: 7
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.

Record ID: DOR-AA7578
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A silver sixpence of Elizabeth I (1558 - 1603) dating to 1580. Mint of London.Initial mark: Plain cross. Reference: North Vol 2, No. 1997 Diameter: 25.06 mm Weight: 2.08 g Die axis: 1
Created on: Monday 20th August 2018
Last updated: Thursday 6th June 2019
Spatial data recorded.

Record ID: DOR-AA5AE1
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A silver threepence of Elizabeth I (1558 - 1603) dating to 1572. Mint of London. Mint marks: ermine/ermine Reference: North Vol 2, 1998 Date: Post Medieval Diameter: 20.33 mm Weight: 1.27 g Die axis: 4
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.

Record ID: IOW-AA52A1
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
An incomplete and corroded post-Medieval copper-alloy dress hook (c. 1500-c. 1700). Read Class E, Type 3. The tip pf the hook is missing. This dress hook has an attachment loop, a main body and part of the hook element. The trapezoidal attachment loop is bevelled internally and externally at the front. The body is convex at the front and hollow on the reverse. The front has moulded relief decoration in the form of a stylised flower head. It has a central pellet with six radiating arms and a single pellet in each segment, all within a linear circular border. The hook is 'D'-shape…
Created on: Monday 20th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.