Record ID: HESH-F7DEDC
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A complete lead alloy unifaced token or possibly gaming counter / token. It is circular in plan with a raised central boss giving it a D shaped section. The upper face is decorated with a poorly aligned vertical cross which divides the flan unevenly - within each quarter is a single boss like pellet. The reverse is plain and undecorated. The weight has a grey coloured surface patina. Diameter: 20.5mm, thickness: 5.6mm, weight: 11.41 grams
Created on: Friday 6th July 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded. This findspot is known as 'Much Wenlock', grid reference and parish protected.

Record ID: HESH-F8FAA9
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A complete lead alloy bifaced token of post medieval date. It is circular in plan wand rectangular in cross section. The upper face is decorated with a complex mark - possibly a 17th century privy seal comprissing a vertically aligned letter T with two wedge shapes joining the vertical shaft - possibly forming the letter A - in the voids created by these limbs are round pellets. The reverse shows an Axe over a vetical cross. The token has a grey coloured surface patina. Diameter: 19.2mm, thickness: 2.7mm, weight: 6.40 grams
Created on: Friday 6th July 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded. This findspot is known as 'Much Wenlock', grid reference and parish protected.

Record ID: HESH-F9AE6B
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation
A Roman nummus of the House of Constantine Reverse type: Two standards between two soldiers (330-340) Reece Period: 17
Created on: Friday 6th July 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded. This findspot is known as 'Leighton', grid reference and parish protected.

Record ID: HESH-F94D1E
Object type: TOKEN
Broad period: MODERN
County: Shropshire
Workflow stage: Awaiting validation
A heavily worn, corroded and reused later 18th or 19th century half penny. The upper face of the coin is stamped / cut with the initial W and is augmented with drilled hollows at the angles / serrifs
Created on: Friday 6th July 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded. This findspot is known as 'Much Wenlock', grid reference and parish protected.

Record ID: HESH-F97A7C
Object type: COIN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A very heavily worn silver halfgroat of Elizabeth I (1558-1603) the obverse and reverse are heavily polished - under raking light and magnification the remains of a long cross fourchee over a royal shield can be seen.
Created on: Friday 6th July 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded. This findspot is known as 'Leighton', grid reference and parish protected.

Record ID: HESH-F926A0
Object type: TOKEN
Broad period: MODERN
County: Shropshire
Workflow stage: Awaiting validation
A heavily worn, corroded and reused 19th century penny - possibly of George IV. The coin is stamped / cut with the initials T R on both sides - one face is further augmented with drilled hollows forming a ring around the initials.
Created on: Friday 6th July 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded. This findspot is known as 'Much Wenlock', grid reference and parish protected.

Record ID: HESH-F955A6
Object type: TOKEN
Broad period: MODERN
County: Shropshire
Workflow stage: Awaiting validation
A heavily worn, corroded and reused later 18th century farthing. The upper face of the coin is stamped / cut with the initials V W (cut as V V V)
Created on: Friday 6th July 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded. This findspot is known as 'Much Wenlock', grid reference and parish protected.

Record ID: KENT-F6F12B
Object type: COIN
Broad period: IRON AGE
County: Kent
Workflow stage: Awaiting validation
A cast copper-alloy Iron Age unit of the Cantiaci. Obver: Outline Apollo bust left. Reverse: Bull butting right . Flat Linear (FL) type, Holman (2016) variety B4/2-1b. The coin retains substantial casting sprue. Concordance with Allen 104-1. No Concordance with Allen or ABC. Measurements: 19.59mm diameter (including casting sprue), 16.30mm (Intended diameter) and 2.41g in weight.
Created on: Friday 6th July 2018
Last updated: Tuesday 2nd October 2018
Spatial data recorded.

Record ID: WMID-F467E3
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A Medieval silver penny of Edward I (AD 1272-1307). Long cross Class 10cf (North 1042/2) dating to AD 1301-10. Minted at Canterbury. North (1991: 32). The coin has been clipped at 6 to 7 o'clock on the obverse. Dimensions: 19.09mm in diameter and 1.16g in weight.
Created on: Friday 6th July 2018
Last updated: Friday 21st September 2018
Spatial data recorded.

Record ID: WMID-F4D727
Object type: COIN
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
A copper alloy Roman nummus of the House of Constantine, dating to the period AD 330-335 (Reece period 17). [CONSTAN]TIN[OPOLIS] reverse type depicting Victory left on a prow holding shield and sceptre. Mint illegile. Coin has been clipped. Overall dimensions: 14.41mm in diameter and 1.31g in weight.
Created on: Friday 6th July 2018
Last updated: Friday 21st September 2018
Spatial data recorded.

Record ID: WMID-F58873
Object type: BROOCH
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation
An incomplete copper alloy Polden Hill type brooch dating to the Roman period (c. AD 75-175). The brooch consists of the head and wings and the upper part of the bow. The axis bar, spring, pin, foot and catch plate are all missing. The wings are semi- cylindrical in plan with the right hand wing/end caps showing some damage. At the reverse of the head is a concave rectangular slot that would have housed the spring. The bow is broad at the head but quickly tapers to a damaged terminal. On the head of the brooch are the remains of two ribs in light relief that extend just above the join…
Created on: Friday 6th July 2018
Last updated: Friday 21st September 2018
Spatial data recorded.

Record ID: WMID-F71F3C
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper alloy toggle clasp (eye-section) dating to the early Post Medieval period (c. AD 1500-1600). The object is one part of a two-section sword belt fitting of Type 1 classification (Read 2008: 208-9; see nos 753-755). The eye is a rectangular open slot with a circular attachment loop on one side. The short ends of the slot are stepped forward, the terminal end of which is curved to accommodate the bar from the toggle of the second section now missing. The opposite end expands into what would have been an openwork plate, though now terminates in worn breaks. There are…
Created on: Friday 6th July 2018
Last updated: Friday 21st September 2018
Spatial data recorded.

Record ID: WMID-F5F723
Object type: SPUR
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper alloy spur dating to the Post Medieval period (c. AD 1650-1750). The short arms of the spur, which are roughly D-shaped in section, terminate in forked and rounded attachment ends with the remains of rivets in situ. The neck and rowel box are formed from a separate piece of copper alloy and attached onto the spur arms. The neck is oval in section and quite short, drooping slightly downward as it extends towards the rowel box. In plan the neck is waisted and widens to a straight rowel box with rounded expanded terminals. The rowel is missing but there are traces of…
Created on: Friday 6th July 2018
Last updated: Friday 21st September 2018
Spatial data recorded.

Record ID: WMID-F6F5B5
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A Medieval cast copper alloy buckle complete with plate, dating to circa AD 1250 - 1500. The buckle has a 'D' shaped cross section. The buckle is single looped D-shape with expanded outer corners. The buckle has a slightly narrowed strap bar. the frame is convex on the upper face and flat on the reverse. Attached to the narrowed strap bar is a rectangular plate. The plate tapers slightly to a broken edge. The plate is formed from a flat piece of copper alloy that is curved around the frame. The plate has a cut out space in the centre where the remains of the pin are present. The fold …
Created on: Friday 6th July 2018
Last updated: Saturday 1st September 2018
Spatial data recorded.

Record ID: WMID-F990D3
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
A possible copper alloy Roman brooch fragment dating to circa AD 43-200. The fragment consists of part of the bow and head. The wings, spring mechanism, pin, foot and catchplate are all missing. The object is broadly an inverted triangle in form. It is broad at the top and narrows to broken lower edge. There is iron staining on the head which could indicate the object once had an iron pin. The object has a mid-green coloured abraded patina. The fragment measures 22.5 mm in length, 11.8 mm in width, 8.7 mm in thickness and it weighs 4 grams.
Created on: Friday 6th July 2018
Last updated: Friday 24th August 2018
Spatial data recorded.

Record ID: WMID-F5AB94
Object type: COIN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A damaged and worn silver Post Medieval groat of Elizabeth I (AD 1558-1603) First Issue (AD 1558-1561. Uncertain initial mark, either Lis, cross, crosslet or martlet. London mint. North (1991) VOL 2. No 1986.
Created on: Friday 6th July 2018
Last updated: Friday 24th August 2018
Spatial data recorded.

Record ID: WMID-F60046
Object type: COIN
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation
An incomplete contemporary copy of a Roman silver denarius copying Vespasian (AD 69 to AD 79) with a copper alloy core, (Reece Period 4). Reverse: seated figure, possibly Concordia or Salus reverse.
Created on: Friday 6th July 2018
Last updated: Friday 24th August 2018
Spatial data recorded.

Record ID: WMID-F9256A
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
A possible copper alloy Roman brooch fragment dating to circa AD 43-200. The fragment consists of part of the bow. The wings, spring mechanism, pin, foot and catchplate are all missing. The bow is convex on the front and flat on the reverse. The object has some moulding detail at the upper edge.Just below are two horizontal ribs in light relief. These are visible at the front only and do not extend to the reverse. The object has a mid-green coloured abraded patina. The fragment measures 20.4 mm in length, 9.1 mm in width, 3.7 mm in thickness and it weighs 2.8 grams.
Created on: Friday 6th July 2018
Last updated: Friday 24th August 2018
Spatial data recorded.

Record ID: WMID-F829B9
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Awaiting validation
An incomplete copper alloy Trumpet style brooch, of the Roman period, dating from c. AD 75 - c. AD 175. The head and upper part of the bow are intact. The pin, spring, foot and catchplate are missing. The fragment is an inverted 'L' shape in profile. The head of the brooch is oval in plan, and tapers into the bow. The reverse of the head is bulbous. The bow of the brooch is D shaped in cross section with a convex front and flat reverse. Halfway down the length of the bow there is decoration in the form of a horizontal rib in light relief. The central rib is flanked by a horiz…
Created on: Friday 6th July 2018
Last updated: Friday 24th August 2018
Spatial data recorded.

Record ID: WMID-F738AD
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy brooch of Colchester derivative Polden Hill type, of Roman date (AD 80-120). The brooch consists of the head and wings and the upper part of the bow. The axis bar, spring, pin, foot and catch plate are missing. The wings are semi- cylindrical in plan with intact end caps which are pierced to hold the axis bar which is now missing. At the reverse of the head is a rectangular slot that would have housed the spring. At the head of the brooch in the centre is a pierced crest which has the partial remains of the spring. The bow is broad where it meets the …
Created on: Friday 6th July 2018
Last updated: Friday 24th August 2018
Spatial data recorded.