Back to simple search | Back to advanced search

    You searched for:

    • Created: Friday 22nd June 2018
    • Sort: updated
    • Show this many records per page: 100

  • Thumbnail image of NCL-CB39DC

Record ID: NCL-CB39DC
Object type: BUCKLE
Broad period: MEDIEVAL
County: Stockton-on-Tees
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy medieval buckle that conforms well to a Meols type 10 c.AD 1350 - 1400. The pin is missing, leaving just the frame. The buckle is a single looped, oval with a narrowed and offset bar and ornate outer edges. Two prominent knops flank two grooves on the outer edge of the loop which act as rests for the pin. The buckle weighs 4.15g; is 20.27mm deep and 26.09mm wide.
Created on: Friday 22nd June 2018
Last updated: Thursday 14th February 2019
Spatial data recorded.


  • Thumbnail image of PUBLIC-D033C8

Record ID: PUBLIC-D033C8
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Published Find published
A late post-medieval copper-alloy hinged book clasp. One part of the hinge is flat, measuring 30mm long, 17mm wide and 1mm thick. At the non-hinged end there is a central hole 3mm in diameter. The long sides have an undulating curved pattern. The reverse has no decoration, whereas the front has some lettering scratched in it, probably a monogram consisting of the letters WN in an 18th- or 19th-century curving script. The other part has been bent, but was originally flat. It is 20mm long, 17mm wide and 1mm thick. It has two decorative tear- or comma-shaped holes near the hinge end, an…
Created on: Friday 22nd June 2018
Last updated: Monday 21st January 2019
Spatial data recorded. This findspot is known as 'Near Freiston', grid reference and parish protected.


  • Thumbnail image of PUBLIC-D0CF1F

Record ID: PUBLIC-D0CF1F
Object type: BOOK FITTING
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Published Find published
An incomplete copper-alloy book clasp of Howsam type A.1.1, and of medieval date (c. 1350-1450). The object is part of a two-piece book clasp with hinged plate and loop. The plate has been lost, though the hinge loop remains. The main plate is sub-D-shaped with moulded linear decoration stamped with irregularly spaced annulets to the upper surface. A central circular perforation is also present. A moulded stylised zoomorphic terminal extends from the rounded edge of the main plate, at right angles to the plate itself. The forward-facing terminal has a prominent mouth, nose, brow and e…
Created on: Friday 22nd June 2018
Last updated: Monday 17th December 2018
Spatial data recorded. This findspot is known as 'Freiston Area', grid reference and parish protected.


  • Thumbnail image of LON-CBC53E

Record ID: LON-CBC53E
Object type: COIN
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation Find awaiting validation
A complete medieval silver Venetian soldino issued by Doge Leonardo Loredan (1436-1521), dating to AD 1501-1521. Obverse description: Doge, as standard bearer of Venice, kneeling left, receiving the banner of St. Mark from the patron saint. Obverse inscription: LE·[LAV·DVX]·SMV Reverse description: Standing figure of Christ with halo, holding a cross right. Reverse inscription: LAVS·TIBI·SOLI (You alone be praised) Dimensions: diameter: 12.00mm; weight: 0.22g Daubney A. 2010. The Circulation and Prohibition of Venetian Soldini in Late Medieval England. The British Numismatic…
Created on: Friday 22nd June 2018
Last updated: Thursday 15th November 2018
Spatial data recorded.


  • Thumbnail image of GLO-CFE316

Record ID: GLO-CFE316
Object type: HOARD
Broad period: POST MEDIEVAL
County: South Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Three coins of Charles I Silver halfcrown of Charles I Oxford mint dated to 1642 Obverse: King wearing armour, holding a sword, on horseback facing left. Plume (oxford type) behind. Obverse inscription: [CA]ROLUS D G MAG FRI ET HIB REX Reverse: RELIG PROT LEG ANG LIBER PAR between two straight lines, with three, thick plumes (oxford type) above and date 1642 below. Reverse inscription: EXVRGAT DEVS DISSIPENTVR [INI]MICI Diameter: 35mm, weight:14.77g, die axes 5 o'clock N2411 Silver halfcrown of Charles I dated to 1638-1639 Tower mint Obverse: King wearing armour, holding a swor…
Created on: Friday 22nd June 2018
Last updated: Thursday 8th November 2018
Spatial data recorded.


  • Thumbnail image of GLO-D08B5D

Record ID: GLO-D08B5D
Object type: HOARD
Broad period: POST MEDIEVAL
County: South Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
Two coins of Elizabeth I 1) Silver shilling of Elizabeth I Dated to 1602 Obverse: crowned bust left. Obverse inscription: ELIZAB: D G ANG FR ET HIB REGI Reverse: shield on long cross fourchée Reverse inscription: POSVI DEV ADIVTOREM MEV Mint mark: 2 Diameter 30mm, weight 5.43g, die axes 4 o'clock 2) Silver shilling of Elizabeth I Dated to 1558-1603 Obverse: crowned bust left. Obverse inscription: ELI[ZAB: D G ANG FR ET] HIB REGI Reverse: shield on long cross fourchée Reverse inscription: POSVI DE[V ADIVTOREM MEV] Mint mark: unreadable Diameter 25mm, weight 4.06g, die ax…
Created on: Friday 22nd June 2018
Last updated: Thursday 8th November 2018
Spatial data recorded.


  • Thumbnail image of HESH-D25585

Record ID: HESH-D25585
Object type: TOKEN
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
A very small lead alloy unifaced token. It is circular in plan and rectangular in profile.The upper face is decorated with a two indistinct initials D N or V N positioned centrally. The reverse is plain and undecorated - two small projections are present. The token has a cream coloured surface patina. Diameter: 8.5mm, thickness: 1.6mm, weight: 0.28 grams
Created on: Friday 22nd June 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded. This findspot is known as 'Wellington', grid reference and parish protected.


  • Thumbnail image of HESH-D2EC34

Record ID: HESH-D2EC34
Object type: WEIGHT
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
A lead alloy lead weight of probable later medieval or post medieval date (1400-1800). The weight is circular in plan and rectangular in profile.The upper face is stamped with a C with distinct serrifs; it is positioned below the mid-point. Apart from this mark - it is undecorated. The weight has a mid-grey -cream coloured surface patina. The mass of teh weight is very close to the 2 oz - therefore it is likely to represent a 1/8th of a lb Diameter: 33.9mm, thickness: 7.1mm, weight: 58.6 grams (2 ozs)
Created on: Friday 22nd June 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded. This findspot is known as 'Stoulton', grid reference and parish protected.


  • Thumbnail image of HESH-D1FC7A

Record ID: HESH-D1FC7A
Object type: COIN
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
A voided long cross penny of Henry III of Class Vb (AD 1250-1256) struck by the moneyer Ricard at the London Mint North: 992
Created on: Friday 22nd June 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded. This findspot is known as 'Little Birch', grid reference and parish protected.


  • Thumbnail image of HESH-CF73EE

Record ID: HESH-CF73EE
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy nummus of Constantine struck at the mint of Lugdunum during Reece Period: 15 Reverse type - SOLI INVICTO COMITI
Created on: Friday 22nd June 2018
Last updated: Tuesday 30th October 2018
No spatial data available.


  • Thumbnail image of HESH-CF9D15

Record ID: HESH-CF9D15
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy nummus of the House of Constantine - reverese type two standards between two soldiers (AD 330-335) Reece Period: 17
Created on: Friday 22nd June 2018
Last updated: Tuesday 30th October 2018
No spatial data available.


  • Thumbnail image of HESH-D108DD

Record ID: HESH-D108DD
Object type: COIN
Broad period: POST MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
A worn bent and cracked silver Venitian Soldino of Daubney Type 3 (1486-1538 ) Doge Leonardo Loredan (1501 - 1521). Obverse : Doge, as standard bearer of Venice, kneeling left, receiving the banner of St. Mark from the patron-saint standing right. [LEO] LAV [D.V.X.] S.M.V. Reverse : Standing figure of Christ with halo, holding a cross right. [LAVS.TI]BI.SOLI
Created on: Friday 22nd June 2018
Last updated: Tuesday 30th October 2018
Spatial data recorded. This findspot is known as 'Little Birch', grid reference and parish protected.


  • Thumbnail image of HESH-D0375D

Record ID: HESH-D0375D
Object type: BELL
Broad period: POST MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
Cast copper alloy crotal or rumbler bell of probable late medieval or post medieval date (1400-1800). The bell is sub-circular in plan and profile with an integral cast sub-rectangular suspension loop attached to the top. The upper hemisphere of the bell is decorated with a star burst pattern around the suspension loop; it has two cast circular holes (diameter 6.5mm) positioned either side of the suspension loop. The lower hemisphere is decorated with radial lines eminating fom the central split - this is formed from two circular perforations joined by a linear slot. The initial B is s…
Created on: Friday 22nd June 2018
Last updated: Friday 19th October 2018
Spatial data recorded.


  • Thumbnail image of HESH-D0536C

Record ID: HESH-D0536C
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
Cast lead or lead alloy bi-convex decorated spindle whorl of Roman to Post Medieval date (1 - 1650 AD); most probably medieval date (AD 1300-1550). The spindle whorl is broadly circular in plan and a globular bi-convex shape in profile. Both faces have a cast rim around the edge and also a similar rim around the circumference of the inner hole - this central rim is very high compared to most examples recorded to date. The central hole is broadly circular and has been cast / set slightly off centre; it has an internal diameter of 7.8mm. The upper and lower faces are decorated with the s…
Created on: Friday 22nd June 2018
Last updated: Friday 19th October 2018
Spatial data recorded.


  • Thumbnail image of HESH-D1784E

Record ID: HESH-D1784E
Object type: BROOCH
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
A near complete cast copper alloy Roman Trumpet brooch dating from AD 75 - 175. The bow of the brooch has an angular profile and an angular D shaped cross section. The bow tapers from a flared head to a tapered foot knop. The head of the brooch is complete, it is very robust being oval in plan, and tapers into the bow. The reverse of the head is concave and has a cast D shaped projecting bar which extends from the upper to lower edges of the reverse. This projection has a small circular hole (2.3mm) through it; this would originally have held a wound wire spring / pin - which is now lo…
Created on: Friday 22nd June 2018
Last updated: Friday 19th October 2018
Spatial data recorded. This findspot is known as 'Little Birch', grid reference and parish protected.


  • Thumbnail image of HESH-D30C32

Record ID: HESH-D30C32
Object type: VESSEL
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Two conjoining fragments of a cast copper alloy turned vessel of probable late medieval to post medieval date (1400 - 1650). The fragment consists of part of the rim and small section of the sidewall. The internal and external surfaces have a brushed / turned surface. The vessel fragments are a mid green grey colour with a coroded surface patina. The fragments when joined measures 55.8mm length, 41.2mm width, is 4.1mm thick at rim and 2.2mm thick body; it weighs 21.25 grams. When conjoined the external diameter of the plate can be projected - suggesting it was originally at least 40cm…
Created on: Friday 22nd June 2018
Last updated: Friday 19th October 2018
Spatial data recorded. This findspot is known as 'Stoulton', grid reference and parish protected.


  • Thumbnail image of HESH-D24239

Record ID: HESH-D24239
Object type: TOKEN
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
A lead alloy unifaced token. It is circular in plan and rectangular in profile.The upper face is decorated with a daisy wheel flower formed of six lentoid raised hoops or loops positioned evenly around a central pellet / boss. A circular raised ring passes through the daisy wheel. The reverse is plain and undecorated. The token has a grey coloured surface patina. Diameter: 17.5mm, thickness: 2.0mm, weight: 2.50 grams
Created on: Friday 22nd June 2018
Last updated: Monday 15th October 2018
Spatial data recorded. This findspot is known as 'Wellington', grid reference and parish protected.


  • Thumbnail image of HESH-D2242A

Record ID: HESH-D2242A
Object type: COIN
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
A voided long cross cut half penny of Henry III of Class Va-d (AD 1250-1256) struck by the moneyer Nicole at the Canterbury Mint North: 991-3
Created on: Friday 22nd June 2018
Last updated: Monday 15th October 2018
Spatial data recorded. This findspot is known as 'Wellington', grid reference and parish protected.


  • Thumbnail image of HESH-CE476E

Record ID: HESH-CE476E
Object type: BROOCH
Broad period: ROMAN
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy Colchester derivative Polden Hill type brooch of Roman date (80-120 AD). The wings are near complete with flat and pierced end cap. The axis bar, spring and pin are lost. The spring was probably formed of copper alloy wire which was held in place by an external cord which is fixed to a rearward facing hook positioned at the midpoint on the upper edge of the reverse. The head of the brooch bow is hump like - being comma shaped in profile. The bow is D shaped in cross section. It extends to a broken edge on the lower bow. The catch-plate is formed from a r…
Created on: Friday 22nd June 2018
Last updated: Monday 15th October 2018
Spatial data recorded. This findspot is known as 'Bodenham', grid reference and parish protected.


  • Thumbnail image of HESH-CFBA43

Record ID: HESH-CFBA43
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
Cast copper alloy harness fitting of Medieval date (1250-1400). The fitting is incomplete and represents only one broken element of a larger composite piece. The extant fragment is broadly rectangular in both plan and cross section. In design it is probably best described as a slotted bar which would originally have held a pivoting central spindle upon which enamelled and gilded harness pendants would have been displayed. Only one arm of this bar survives being broken across a pierced oval tab positioned at one edge. From this broken edge the bar tapers in both thickness and width term…
Created on: Friday 22nd June 2018
Last updated: Tuesday 18th September 2018
Spatial data recorded.


  • Thumbnail image of HESH-D19A4D

Record ID: HESH-D19A4D
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy 'Winchester style' strap end of later Early Medieval (10th - 11th century) date. The strap end is incomplete and the upper and lower faces are lost. The damage appears to be old as the breaks are either corroded or patinated. Originally the strap end would have been rectangular (tongue shaped) with a rounded base and riveted attachment plate. The stepped attachment plate is lost and broken across the rivet holes whilst the rounded terminal has lost its projecting point. A thickened transverse rib separates the rivets from the body of the strapend. The body of the st…
Created on: Friday 22nd June 2018
Last updated: Tuesday 18th September 2018
Spatial data recorded. This findspot is known as 'Little Birch', grid reference and parish protected.


  • Thumbnail image of PUBLIC-D047F2

Record ID: PUBLIC-D047F2
Object type: PADLOCK
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy Medieval barrel padlock dating from the 12th-16th century. The case is rectangular in section with flat ends and bulges around middle. One end of the case has a rectangular slot for the key and at the other end the rectangular aperture is divided into two by an internal bar. This would have taken the spring mechanism, a detachable portion that would have had an integrally cast, flat projection, terminating in the loop to hold the point of the padlock pin. Above the key slot on thr top face is an integrally cast projection or tab that has the stub of the…
Created on: Friday 22nd June 2018
Last updated: Friday 17th August 2018
Spatial data recorded. This findspot is known as 'Freiston area', grid reference and parish protected.


  • Thumbnail image of PUBLIC-D02459

Record ID: PUBLIC-D02459
Object type: TWEEZERS
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A pair of copper-alloy tweezers of probable early medieval or medieval date, and which were probably used to hold pages of a book. The tweezers comprise two slender arms, arced at the top, and with slightly flared and inturned nibs at the terminals. The loop end has a very slight shoulder making it 1mm wider than the arms at that end. Approximately one third from the end is a metal bar which is bent around the arms which would have been used to secure them when not in use. The arms are not decorated. They measure 64.56mm in length, 9.73mm in width, 5.67mm in thickness and weighs 8.63g.…
Created on: Friday 22nd June 2018
Last updated: Friday 17th August 2018
Spatial data recorded. This findspot is known as 'Frieston area', grid reference and parish protected.


  • Thumbnail image of PUBLIC-D0F53D

Record ID: PUBLIC-D0F53D
Object type: SCABBARD
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A possible copper-alloy post-medieval dagger scabbard chape with pressed decoration. The chape has been squashed and is now 15mm in diameter at one end and 11mm at the other and is cone shaped being circular in cross section. The chape is decorated. At the wide end is a band of sloping lines between two horizontal lines. There is a vertical diamond pattern above the band. The chape is 25mm in length.It weighs 4.25 grams. The cone is split vertically through the diamond pattern. Directly opposite in a vertiacal line are a series of four circular perforations. The last one at the wide en…
Created on: Friday 22nd June 2018
Last updated: Friday 17th August 2018
Spatial data recorded.


  • Thumbnail image of PUBLIC-D0C69E

Record ID: PUBLIC-D0C69E
Object type: SEAL MATRIX
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy post-medieval seal matrix. The seal is oval12.9mm by 13.5mm, with a carved circle near the circumference. Inside this are the letters EB or JB (with the J carved as an I with three horizontal bars), also with two 6-armed stars one each above and below the intials. The matrix base curves inwards towards the flattened handle to 4.6mm wide then curves outwards. At the top end of the handle are three horizontal holes, 3.4mm diameter, in a line above which the handle has two small projections. These are probably the remains of the top loop which has snapped off. Overall heigh…
Created on: Friday 22nd June 2018
Last updated: Friday 17th August 2018
Spatial data recorded. This findspot is known as 'Near Freiston', grid reference and parish protected.


  • Thumbnail image of WMID-CC7526

Record ID: WMID-CC7526
Object type: FLAT AXEHEAD
Broad period: BRONZE AGE
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
A very worn and incomplete cast copper alloy (bronze) flat axe of Early Bronze Age date (c. 2200 - 2000 BC). The flat axe is broadly sub triangular in plan with a splayed crescent shaped blade. In profile it is broadly lentoid, with slightly tapering edges. In cross section the axe is rectangular. One long edge is curved and the opposite is relatively flat. The tips of the crescent shaped blade have been damaged through either abrasion or wear, as has the blade edge itself. A distinct blade facet is not present; it has been lost through abrasion. There is no evidence of any form of …
Created on: Friday 22nd June 2018
Last updated: Friday 3rd August 2018
Spatial data recorded.


  • Image not taken

Record ID: SOM-D02FC4
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy nummus of Theodora dating to AD 337 to 341 (Reece period 17). PIETAS ROMANA reverse type depicting Pietas facing left holding infant. Mint unclear.
Created on: Friday 22nd June 2018
Last updated: Thursday 2nd August 2018
Spatial data recorded.


  • Image not taken

Record ID: SOM-D05C68
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy nummus of the House of Constantine dating to AD 335 to 341 (Reece period 17). GLORIA EXERCITVS reverse type depicting two soldiers flanking one standard. Mint unclear.
Created on: Friday 22nd June 2018
Last updated: Thursday 2nd August 2018
Spatial data recorded.


  • Image not taken

Record ID: SOM-D0E832
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy nummus of Valens dating to AD 364 to 378 (Reece period 19). SECVRITAS REI PVBLICAE reverse type depicting Victory walking left with a wreath and a palm. Mint unclear.
Created on: Friday 22nd June 2018
Last updated: Thursday 2nd August 2018
Spatial data recorded.


  • Thumbnail image of SOM-D17A1C

Record ID: SOM-D17A1C
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy nummus of Valens dating to AD 364 to 378 (Reece period 19). SECVRITAS REI PVBLICAE reverse type depicting Victory walking left with a wreath and a palm. Mint of Aquileia. LRBC pt.II no. 1036.
Created on: Friday 22nd June 2018
Last updated: Thursday 2nd August 2018
Spatial data recorded.


  • Image not taken

Record ID: SF-D09126
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Roman nummus of Constantine I (AD 306-337), dating to the period c. AD 316 (Reece Period 15). SOLI INVICTO COMITI reverse type depicting Sol standing right and looking left, chlamys across left shoulder, globe in left hand and raising right hand. Reverse legend reads: SOLI INVIC-TO CO[]. Obverse depicts a laureate bust, draped and cuirassed right. Obverse legend reads: [IMP] CONSTANTINVS P F AVG. Mint: Arles. Mark: T F/* -//[P]AR[] As RIC Vol VII, page 241, no. 84.
Created on: Friday 22nd June 2018
Last updated: Tuesday 24th July 2018
Spatial data recorded. This findspot is known as 'Lidgate', grid reference and parish protected.


  • Thumbnail image of PUBLIC-D5DA0D

Record ID: PUBLIC-D5DA0D
Object type: COIN
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Published Find published
A copper-alloy Roman nummus of Constantius II (AD 323-361), dating to the period AD 335-340 (Reece period 17). GLOR-IA EXERC-[ITVS] reverse type depicting Two soldiers standing either side of one standard. Mint of Trier. Cf. RIC VIII, p. 143, no. 71.
Created on: Friday 22nd June 2018
Last updated: Monday 23rd July 2018
Spatial data recorded. This findspot is known as 'AG001B', grid reference and parish protected.


  • Image not taken

Record ID: SF-D12DCE
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A incomplete copper-alloy Roman nummus of Constantine I (AD 306-337), dating to the period c. AD 312-313 (Reece Period 15). SOLI INVICTO COMITI reverse type depicting Sol standing left, chlamys across left shoulder, globe in left hand and raising right hand. Reverse legend reads: [] []N-VIC-TO COMITI. Obverse depicts a laureate bust, draped and cuirassed right. Obverse legend reads: IMP []ANTINVS P AVG. Mint: London. Mark: [*] -//PLN. RIC Vol VI, page 140, no. 282
Created on: Friday 22nd June 2018
Last updated: Thursday 19th July 2018
Spatial data recorded. This findspot is known as 'Lidgate', grid reference and parish protected.


  • Thumbnail image of WMID-CDBC92

Record ID: WMID-CDBC92
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete struck / hammered copper alloy dupondius or as, of uncertain emperor, but probably of 1st to 3rd century AD dating. Reverse type uncertain, depicts a possible figure standing left, holding a spear or sceptre on left. Mint uncertain. Diameter: 28.0 mm Thickness: 3.6 mm Weight: 12.8 g
Created on: Friday 22nd June 2018
Last updated: Wednesday 18th July 2018
Spatial data recorded.


  • Thumbnail image of WMID-CCF931

Record ID: WMID-CCF931
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy, incomplete, contemporary copy of a radiate or nummus of probably the House of Constantine (AD 307 - AD 361), dating from probably AD 307 - AD 318 (Reece Period: 15). Reverse type possibly GENIO POPVLI ROMANI, depicting Genius standing facing with corn measure on his head holding cornucopiae or GENIO POP ROM, depicting Genius standing facing with corn measure, cornucopiae. Mint: Unclear. Cf. Reece and James (2000), page 32 - 3, No 65 and 68. Diameter: 20.2 mm Thickness: 2.8 mm Weight: 3.9 g Coin is heavily worn and the depictions on obverse and reverse are crude. Re…
Created on: Friday 22nd June 2018
Last updated: Wednesday 18th July 2018
Spatial data recorded.


  • Thumbnail image of WMID-CC105C

Record ID: WMID-CC105C
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete, copper alloy, possible token of possibly the Post Medieval period, dating from c. AD 1500 - AD 1800. The token has been broken around the edge, and would have been circular in plan. The obvers depicts a bust left, with pellets around the top of the head, maybe depicting a stylised crown or headdress. There is a rectangular rim around the edge and there does not appear to be any legend around the token. The reverse of the object appears to depict three robed figures standing side by side, the central figure appears to be holding a shield or similar at their feet. The fig…
Created on: Friday 22nd June 2018
Last updated: Wednesday 18th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-CE556E

Record ID: SOM-CE556E
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval copper alloy double looped buckle frame dating to AD 1350 to 1650. The buckle has two oval loops divided by a narrowed and recessed axis bar. The bar has slight knops at each end. The front is convex and the back is flat. The buckle is deformed in such a way that each loop curves giving a concave profile. The surface is covered by a brown-green patina. No decoration. The frame measures 37.3 mm in length, 25.8 mm in width, 2.5 mm in thickness and weighs 4.03 g. This style of buckle is quite common and numerous examples are documentedon this database. Compare similar exam…
Created on: Friday 22nd June 2018
Last updated: Thursday 12th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-CFF414

Record ID: SOM-CFF414
Object type: VESSEL
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Medieval or Post Medieval copper alloy foot from a cooking vessel probably dating to AD 1200 to 1650. The foot is trapezoidal in section and with three narrow ribs on the outer surface. The piece measures 60.7 mm in length, 35.2 mmin width, 26.7 mm in thickness and weighs 147.03 g. Cast copper alloy vessels were widely used from AD 1200 to 1700. Legs and feet are the most commonly recorded find and Butler et alii (2009, 4) suggest there were four main types of leg used. This is an example of Type A which seems to have been in widespread use in te medieval period with some examples con…
Created on: Friday 22nd June 2018
Last updated: Thursday 12th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-CC6AFD

Record ID: SOM-CC6AFD
Object type: JETTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post-Medieval copper alloy Nuremberg Jetton issued by an unclear Master, dating to AD 1500-1585. Rose/Orb type depicting three crowns,probably flanked by annulets and alternating with three fleur de lis around a central rose on the obverse and the imperial orb surmounted by a cross within a three arched tressure on the reverse. Mitchiner (1988) pp.377-81.
Created on: Friday 22nd June 2018
Last updated: Wednesday 11th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-CD065C

Record ID: SOM-CD065C
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper alloy nummus of the House of Constantine dating to AD 330-335 (Reece period 17). GLORIA EXERCITVS reverse type depicting two soldiers and two standards. Mint of Trier.
Created on: Friday 22nd June 2018
Last updated: Wednesday 11th July 2018
Spatial data recorded.


  • Thumbnail image of SOM-CE1C63

Record ID: SOM-CE1C63
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval copper alloy double looped buckle frame dating to AC 1550 to 1650. The buckle has two oval loops with moulded rosette decoration on the outer edge of each loop and lobed knops at either end of the central strap bar. The pin is missing. The front is convex and the back is flat and undecorated. The buckle is deformed in such a way that one loop curves in a convex profile. It surface has a green patina with traces of iron corrosion on the upper surface of the right rosette. The frame measures 42.3 mm in length, 30.8 mm in width, 2.6 mm in thickness and weighs 6.41 g. Simil…
Created on: Friday 22nd June 2018
Last updated: Wednesday 11th July 2018
Spatial data recorded.


  • Thumbnail image of GLO-CC7D41

Record ID: GLO-CC7D41
Object type: PURSE
Broad period: MEDIEVAL
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy purse bar that consists of the suspension loop and central section of the frame. The block hub is rectangular shaped with a hole that passed through the middle that mounts the spindle for the suspension loop. The loop has a small cylindrical neck and a large oval loop at the top, on the base of the loop and passing through the hub is a narrowed bar that has a hemispherical knop at the base. Both sides of the hub appear to be undecorated. Thin circular rod project to either sides of the hub but both are at their base. Date 1400-1600
Created on: Friday 22nd June 2018
Last updated: Wednesday 4th July 2018
No spatial data available.


  • Thumbnail image of GLO-CC4905

Record ID: GLO-CC4905
Object type: PURSE
Broad period: MEDIEVAL
County: North Somerset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy purse bar that consists of the suspension loop and central section of the frame. The block hub is shield shaped with a rounded base and square top, this has a hole that passed through the middle that mounts the spindle for the suspension loop. The loop has a small cylindrical neck and a large circular loop at the top , on the base of the loop and passing through the hub is a narrowed bar that has a flat circular knop at the base. Both sides of the hub appear to be decorated, but this decoration is obscured by corrosion. Arms projects from either side of the …
Created on: Friday 22nd June 2018
Last updated: Wednesday 4th July 2018
Spatial data recorded.


  • Thumbnail image of NARC-CEEE24

Record ID: NARC-CEEE24
Object type: COIN
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Published Find published
A copper-alloy Roman radiate of Gallienus (AD 253-268), sole reign, dating to the period AD 260-268 (Reece period 13). DIANAE CONS [AVG] reverse type depicting an antelope standing left. Mint of Rome. As Cunetio no. 1344. Diameter: 17.75mm, Thickness: 1.67mm, Weight: 1.8g.
Created on: Friday 22nd June 2018
Last updated: Wednesday 27th June 2018
Spatial data recorded.


  • Thumbnail image of LANCUM-CD2F8E

Record ID: LANCUM-CD2F8E
Object type: COIN
Broad period: ROMAN
County: Cumbria
Workflow stage: Awaiting validation Find awaiting validation
Silver Roman denarius of Antoninus Pius, dating to 161 AD. Reece Period 7. CONSECRATIO reverse type, depicting crematorium with four storeys. Obverse of bare-headed bust right, DI[V]VS ANTONINVS. The coin is 17.15mm in diameter and 2.39mm in thickness. Sear no. 5190; RIC no. 435.
Created on: Friday 22nd June 2018
Last updated: Wednesday 27th June 2018
Spatial data recorded.


  • Thumbnail image of LANCUM-CC7CEC

Record ID: LANCUM-CC7CEC
Object type: TOKEN
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
Small uniface lead token of post-medieval date (c. 1500 - 1700 AD). The object is a round disc with a design on one side. Unfortunately, the surface is very worn and much of the design is now obscured. What can be seen looks to be a Tudor shield in the bottom right corner of a larger design, perhaps a coat of arms. The object is light brown in colour. It is 11.62mm in diameter, 1.34mm in thickness and weighs 0.8g. A parallel example on the database may be KENT-2A8BBD.
Created on: Friday 22nd June 2018
Last updated: Wednesday 27th June 2018
Spatial data recorded.


  • Thumbnail image of LANCUM-CC2B0F

Record ID: LANCUM-CC2B0F
Object type: COIN
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
Silver post-medieval penny of Henry VIII, dating to 1514 - 1526 AD. First coinage. Star initial mark, mint of Durham. Soverign type obverse of king seated on throne, [H] D G ROSA SINE SPINA. Reverse of square shield on long cross fourchee with TD beside shield, CIVI / TAS / [DU]R / HAM. The coin is 14.26mm in diameter, 0.70mm in thickness and weighs 0.7g. Spink (2005) no. 2332.
Created on: Friday 22nd June 2018
Last updated: Wednesday 27th June 2018
Spatial data recorded.


  • Thumbnail image of LANCUM-CBC783

Record ID: LANCUM-CBC783
Object type: COIN
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
Silver post-medieval threehalfpence of Elizabeth I, dating to 1560 - 1561 AD. Second issue, cross-crosslet initial mark. Mint of London. Obverse of left-facing bust, E . D . G . ROSA SINE SPINA. Reverse of square shield on long cross fourchee, CIVI / TAS / LON / DON. The coin is 14.16mm in diameter, 0.44mm in thickness and weighs 0.1g.
Created on: Friday 22nd June 2018
Last updated: Wednesday 27th June 2018
Spatial data recorded.


  • Thumbnail image of LON-CD3B93

Record ID: LON-CD3B93
Object type: PILGRIM BADGE
Broad period: MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation Find awaiting validation
A Medieval cast lead alloy openwork monogram of Maria pilgrim badge dating to the 14th-15th century. The badge is in the shape of a Lombardic M with crown above. Similar badges are illustrated in Spencer (1998:156 fig.166-167b. The badge would probably have been circular on plan with a thin pelleted outer ring linked by larger pellets to a wider inner ring with pelleted inner and outer edge and the Lombardic M within. Spencer (1998:155) writes "One of the most popular badges of Our Lady was the Lombardic M with a crown above it, standing for Maria, Queen of Heaven. The M was the most …
Created on: Friday 22nd June 2018
Last updated: Sunday 24th June 2018
Spatial data recorded.


  • Thumbnail image of WAW-CFF3B8

Record ID: WAW-CFF3B8
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
Roman (c. 80-200) trumpet brooch: The copper alloy brooch head is oval with traces of two vertical perforated lugs on each side edge of the reverse. The axis bar, spring and pin is missing. On the upper edge of the bow head there is a trace of a head loop. The bow protrudes from the centre of the bow head and tapers on the upper portion. The bow head is decorated with a circular cell filled with blue enamel. The upper bow is decorated with a triple stranded ridges. The mid portion of the bow has a prominent semi-circular panel. This panel, on the outer face is decorated with a central …
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of SOM-D14AD9

Record ID: SOM-D14AD9
Object type: SCRAPER (TOOL)
Broad period: BRONZE AGE
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Four Late Neolithic to Early Bronze Age flint scrapers, probably dating to c. 3,300-1,600BC. 1. A thumbnail scraper worked from a reused primary or secondary flake of grey-brown flint; cortex covers those areas of the dorsal face which do not exhibit retouch, c. 60%. The flake has no clear point or bulb of percussion, with one facet of the dorsal face at the proximal end and the ventral face much more heavily patinated, suggesting the reuse of an older tool. The dorsal face exhibits long, scalar retouch, abrupt along the left edge, becoming semi-abrupt at the distal end and right edg…
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of NARC-D08EAE

Record ID: NARC-D08EAE
Object type: COIN
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver Sixpence of Elizabeth I (AD 1558-1603). Milled issue. Long cross fourcée reverse over squared shield. London mint. AD 1561-1571. Diameter: 19.76mm, Thickness: 0.93mm, Weight: 1.9g. North Vol II, P 138, No 2024-2031
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of NARC-D0452E

Record ID: NARC-D0452E
Object type: COIN
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver Halfpenny of Henry VII (AD 1485-1509). North standard type G. Withers type 3c. Long cross fourcée reverse with three pellets in each quadrant. London mint. Diameter: 12.74mm, Thickness: 0.68mm, Weight: 0.4g. North Vol II, P 103, No 1735.
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of NARC-D0143C

Record ID: NARC-D0143C
Object type: COIN
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver Halfgroat of Henry VIII (AD 1509-1547). Second bust, Second coinage. Long cross fourceé over squared shield reverse. York Mint. AD 1526-1544. Diameter: 18.80mm, Thickness: 0.89mm, Weight: 1.1g. The coin has been bent into an 'S' shape North Vol II, P 112, No 1812.
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of NARC-CFE0DB

Record ID: NARC-CFE0DB
Object type: COIN
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper alloy Nummus of Magnentius (350-353 AD). Reece Period 18. Uncertain reverse type. Uncertain mint. Length: 28.27mm, Width: 15.15mm, Thickness: 2.42mm, Weight: 4.8g. The retained portion of the coin represents approximately 45% of the coin.
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of WAW-CD6558

Record ID: WAW-CD6558
Object type: COIN
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval coin: silver penny of Alexander III of Scotland (1249-1286) minted in Berwick by Willem. . First Coinage (Long Cross and Stars 1250-c. 1280). Seaby No.5043, Type III.
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of NARC-CFC0F3

Record ID: NARC-CFC0F3
Object type: JETTON
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy Jetton of Hans Krauwinckel II (AD 1586-1635). Rose orb reverse type. Minted Nuremburg. Diameter: 26.41mm, Thickness: 0.79mm, Weight: 1.5g. The coin is missing a portion of its outer flan and there is a 45 degree bend between 12-4 O'clock. Mitchiner, Vol I, P 437, No 1509.
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of NARC-CFA176

Record ID: NARC-CFA176
Object type: COIN
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy Farthing of Charles II (AD 1645-1685). Crowned harp reverse. Uncertain mint. Diameter: 16.69mm, Thickness: 0.57mm, Weight: 0.4g.
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of NARC-CF1BD9

Record ID: NARC-CF1BD9
Object type: COIN
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A reduced silver Roman Siliqua of Julian (AD 355-363), dating to the period AD 360-363. (Reece period 18). Reverse type VOTIS/V/MVLTIS/X within a wreath. Mint of Lugdunum. Cf. RIC VIII, P 195, No 230 Diameter: 15.85mm, Thickness: 1.67mm, Weight: 2.1g.
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of SOM-CEDE8F

Record ID: SOM-CEDE8F
Object type: COIN
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A Medieval silver penny of Henry V (AD 1413-1422). Class C, D, or F. Minted in York. North (1991: 71) no. 1400-1401, 1403.
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of NARC-CED556

Record ID: NARC-CED556
Object type: COIN
Broad period: ROMAN
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Nummus of Uncertain Emperor (AD 296-402). Uncertain reverse type. Uncertain mint. Diameter: 16.74mm, Thickness: 2.14mm, Weight: 1.3g. The coin is missing portions of its outer flan and reverse surface.
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of SOM-CE76A1

Record ID: SOM-CE76A1
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy Colchester derivative initial T-shaped brooch, probably dating to c. AD 50-100. The brooch survives largely complete, missing only its pin and with the catchplate incomplete due to abrasion. At the head of the brooch the wings survive to a width of 24.6mm, these are cylindrical; retaining a copper alloy axis bar in situ, and with a sub-rectangular slot cut into the reverse to accomodate a hinged pin. The wings are c. 4.1mm in diameter, with the reverse of the left wing partially lost. The bow projects from the head with a width of 6.7mm, and is broadly plano-conv…
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


  • Thumbnail image of LON-CB139E

Record ID: LON-CB139E
Object type: ARROWHEAD
Broad period: MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Medieval iron barbed and socketed arrowhead, dating 13th-14th century. The arrow head has a triangular blade and a circular socket. The blade section tapers very gradually from the socket to the point, with barbs at the socket end which extend over the socketed section. The central spine is subtle and not well pronounced. One of the barbs is damaged and missing a small section from the blade edge. Similar examples on the database are GLO-BF0875, SF-5A266B and LON-ECF872. Dimensions: length: 52.55mm; width: 14.99mm; thickness: 4.74mm; weight: 9.03g.
Created on: Friday 22nd June 2018
Last updated: Friday 22nd June 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 63
Search server index: valhalla

You are viewing records: 1 - 63.

Search statistics

  • Total quantity: 81
  • Mean quantity: 1.286
  • Maximum: 12

Filter your search

1 - 63 of 63 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.