Back to simple search | Back to advanced search

    You searched for:

    • Created: Thursday 10th May 2018

  • Thumbnail image of IOW-4C0D0D

Record ID: IOW-4C0D0D
Object type: COIN
Broad period: ROMAN
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
A complete and worn Roman copper-alloy sestertius (AD 41-260). Obverse: Illegible; Bust right. Reverse: Illegible; Unclear standing figure. Diameter: 32.6mm. Weight: 16.88g. DA=12:9.
Created on: Thursday 10th May 2018
Last updated: Friday 11th May 2018
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of IOW-4BBA14

Record ID: IOW-4BBA14
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An incomplete post-Medieval copper-alloy trapezoidal buckle (c. 1550-c. 1700). One loop and the pin are missing. The surviving loop has raised 'pyramidal' knops at the front and is largely hollow at the rear. The narrow bar is oval in cross-section. This buckle is corroded. Length: 21.0mm; width: 29.8mm; thickness: 3.9mm. Weight: 5.53g.
Created on: Thursday 10th May 2018
Last updated: Friday 11th May 2018
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of IOW-4B4061

Record ID: IOW-4B4061
Object type: BUCKLE
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Medieval copper-alloy single-loop buckle (c. 1270-c. 1350). Meols type 12. The pin and plate are missing. The frame is oval in plan with an off-set narrowed bar. The outer edge is expanded and recessed to accommodate a copper-alloy sheet roller on which the pin-tip would have rested. The sheet copper-alloy roller is plain and an abutting join can be seen at the rear. A portion of the roller at the rear is shallow grooved but the grooves are not apparent at the front. The bar is circular in cross-section and the pin loop has caused wear at the centre of the bar. The fra…
Created on: Thursday 10th May 2018
Last updated: Thursday 9th August 2018
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of PUBLIC-48150F

Record ID: PUBLIC-48150F
Object type: COIN
Broad period: ROMAN
County: Hampshire
Workflow stage: Published Find published
A worn copper-alloy Roman copper-alloy nummus, probably of the House of Valentinian, dating to the period AD 364-378 (Reece period 19). [SECVRITAS REI PVBLICAE] reverse type depicting Victory advancing left holding wreath and palm. Uncertain mint. The coin has a circular piercing at 2 o'clock when viewed from the obverse.
Created on: Thursday 10th May 2018
Last updated: Friday 18th May 2018
Spatial data recorded.


  • Thumbnail image of LVPL-471A01

Record ID: LVPL-471A01
Object type: COIN
Broad period: ROMAN
County: Cheshire West and Chester
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver Roman Republican denarius, possibly of the moneyer C. Vibius Pansa, dating to the period c.90 BC (Reece period 1). Reverse type depicting Minerva(?) in a quadriga right, unclear legend in exergue. Mint of Rome. Cf. RRC pp. 346-347, nos. 342/5a-b.
Created on: Thursday 10th May 2018
Last updated: Thursday 21st June 2018
Spatial data recorded. This findspot is known as 'Bickley Hall Farm', grid reference and parish protected.


  • Thumbnail image of CORN-470024

Record ID: CORN-470024
Object type: COIN
Broad period: MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
A sliver groat of Edward III (1327-1377), Fourth Coinage (1351-1377), Pre-Treaty period (1351-61), mint mark Cross I (1351-52), Series C with letters C and E closed, Lombardic M and R with a wedge-shaped tail and annulet stops in the legends, Spink 1565.
Created on: Thursday 10th May 2018
Last updated: Sunday 3rd June 2018
Spatial data recorded.


  • Thumbnail image of CORN-46FD70

Record ID: CORN-46FD70
Object type: COIN
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
An incomplete sixpence of Elizabeth I (1558-1603) Third and Fourth Issues (1561-1577), mint mark indistinct, probably lion (1566-1567) but dated to 1567 on the reverse, Spink 2562.
Created on: Thursday 10th May 2018
Last updated: Sunday 3rd June 2018
Spatial data recorded.


  • Thumbnail image of CORN-46F41C

Record ID: CORN-46F41C
Object type: COIN
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
A silver shilling of Charles I (1625-1649), Tower mint under the King, Group D, Fourth bust, Type 3a, mint mark tun (1636-1638) Spink 2791.
Created on: Thursday 10th May 2018
Last updated: Sunday 3rd June 2018
Spatial data recorded.


  • Thumbnail image of CORN-46E86D

Record ID: CORN-46E86D
Object type: VESSEL
Broad period: MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
A fragment of the rim of a cast copper-alloy cooking vessel. The fragment is roughly triangular, 43.5 mm long, 32 mm wide, 2 mm in thickness at the rim and weighs 15.5 g. The fragment is bent in plan, so that the curvature is unknown. The exterior surface is slightly pitted, but almost entirely coated in burnt black organic matter from when the vessel was near the fire. The interior surface has a smooth coating of copper corrosion and patches of black organic material around the transverse groove below the rim, which is 5 mm in depth. The rim is flush with the exterior of the vessel bu…
Created on: Thursday 10th May 2018
Last updated: Monday 14th May 2018
Spatial data recorded.


  • Thumbnail image of LVPL-46E33E

Record ID: LVPL-46E33E
Object type: COIN
Broad period: POST MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Awaiting validation Find awaiting validation
A silver sixpence of Elizabeth I, (1558-1603). Reverse: POSVI DEV ADIVTOREM MEV; long cross over square shield, 1602 above shield. IM: 2 (1602-1603). North no. 2015.
Created on: Thursday 10th May 2018
Last updated: Thursday 21st June 2018
Spatial data recorded. This findspot is known as 'Bickley', grid reference and parish protected.


  • Thumbnail image of HAMP-46E21E

Record ID: HAMP-46E21E
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Published Find published
A medieval silver penny of Edward I (1272-1307), class 9b1/10ab3 (early) mule, mint of Newcastle Upon Tyne, dating to 1302-1303. Reference: North 1037/1 (obverse) and 1038/2 (reverse); cf. North 1989: nos.478-9. Carl Savage comments, 'Newcastle dies of 10ab3 are only known as reverse dies and so are muled with other issues'.
Created on: Thursday 10th May 2018
Last updated: Tuesday 7th August 2018
Spatial data recorded. This findspot is known as 'Winchester', grid reference and parish protected.


  • Thumbnail image of CORN-46DD93

Record ID: CORN-46DD93
Object type: CAULDRON
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
The foot of a cast copper-alloy cauldron leg, with a short remnant of the cauldron leg attached, 43.5 mm long, 37 mm wide; the thickness of the leg is 11.5 mm and the maximum thickness of the tapered foot 17.5 mm and its weight is 178.9 gm. The short remnant of the leg is parallel-sided with a flat back, and the front face is decorated with four moulded parallel ribs. The out-turned foot is flat-bottomed and its angle with the back face of the leg is about 110 degrees. The front of the foot is decorated with three parallel ribs, the ends of which taper and extend as points beyond the f…
Created on: Thursday 10th May 2018
Last updated: Monday 14th May 2018
Spatial data recorded.


  • Thumbnail image of CORN-46D378

Record ID: CORN-46D378
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Incomplete cast copper alloy double-loop vesica-shaped buckle frame, with strap bar but the pin is missing. The central strap bar is flush with the frame and narrows from 6 mm to 2 mm in the centre where it has been worn thinner by the pin. The loops are slightly asymmetrical and oval in plan. The frame is angled, becoming wider at the outer edges of the two loops, coming to a point mid-way along the outer edge. The frame is flat on the back with a slightly convex upper face. The upper and lower edges of the frame are pitted and corroded but there is slight evidence suggestive of a sma…
Created on: Thursday 10th May 2018
Last updated: Monday 14th May 2018
Spatial data recorded.


  • Thumbnail image of CORN-46CBD6

Record ID: CORN-46CBD6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Incomplete cast copper-alloy double-looped plain annular buckle. The frame is circular in plan, 18 mm in diameter, 2 mm thick and 2.5 mm in height, and B-shaped in profile with straight inner edge and bevelled outer edge. The central strap bar is flush with both faces of the frame; it is 0.75 mm wide at the edges but is slightly distorted and narrower at the centre, through wear by the pin, which is missing. The surface of the buckle is slightly corroded and pitted in places but there is no evidence of surface decoration. Whitehead (1996) illustrates a similar annular buckles on page …
Created on: Thursday 10th May 2018
Last updated: Monday 14th May 2018
Spatial data recorded.


  • Thumbnail image of LVPL-46BC3F

Record ID: LVPL-46BC3F
Object type: BROOCH
Broad period: ROMAN
County: Cheshire West and Chester
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy trumpet brooch dating to the Roman period. The brooch has atypical oval or 'trumpet' shaped head. The bow tapers in width down the bow where it terminates with an ancient break above the foot. In the centre of the bow is an oval waist moulding consisting of a raised central ridge, bordered by a ridge on each side and another ridge both above and below. The remains of linear grooves can be seen on the lower ridge however the others are worn. At the rear of the head is a central pierced lug to which the spring would have been secured. The lug is surrounded by …
Created on: Thursday 10th May 2018
Last updated: Thursday 21st June 2018
Spatial data recorded. This findspot is known as 'Peckforton', grid reference and parish protected.


  • Thumbnail image of HAMP-46B565

Record ID: HAMP-46B565
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval penny of Edward II, class 11b1, mint of London, dating to 1312-14.Reference: North 1061/1
Created on: Thursday 10th May 2018
Last updated: Wednesday 23rd May 2018
Spatial data recorded. This findspot is known as 'Winchester', grid reference and parish protected.


  • Thumbnail image of OXON-46B2E8

Record ID: OXON-46B2E8
Object type: SEAL
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Two complete but worn and damaged lead alloy seals dating from the later 18th or 19th century AD. The seals have a large crown on one side and the words CUSTOMS AND EXCISE over three lines on the reverse. These are British customs seals probably used on bags of flax seeds imported from the Netherlands, showing that they had been checked and approved (and taxed) by British customs.
Created on: Thursday 10th May 2018
Last updated: Friday 11th May 2018
No spatial data available.


  • Thumbnail image of SWYOR-46A7FC

Record ID: SWYOR-46A7FC
Object type: BUTTON AND LOOP FASTENER
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy double bossed or headed button and loop fastener dating from the early Roman period. It is of a type not classified by Wild, but with some stylistic similarities to Wild Class II: ring headed, which dates from the mid first to second century (AD 43 - 200). The fastener is incomplete with all of the "button" element missing, meaning it cannot be assigned to a Wild Class. The backward projecting shaft and ninety degree bend are also missing.The breaks are very worn and patinated. The upper part of the shaft survives, where it divides to form a triangular loop.…
Created on: Thursday 10th May 2018
Last updated: Thursday 17th May 2018
Spatial data recorded.


  • Thumbnail image of LVPL-468667

Record ID: LVPL-468667
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy S-shaped 'snake belt' fastener, dating to the Post-Medieval period, (c. AD 1575 -c.1800). This fastener is in the form of a curved snake forming two hooks. The fastener is decorated on one face with an animal head terminal at one end and with worn moulded scale-like decoration. The snake has raised and rounded pellets representing the eyes. The object expands in width from the head before narrowing as it curves into the tail where it terminates. Within the curve of the 'neck' is a large lump of corroded metal which was probably once an attachment loop/ring. T…
Created on: Thursday 10th May 2018
Last updated: Thursday 21st June 2018
Spatial data recorded. This findspot is known as 'Woore', grid reference and parish protected.


  • Thumbnail image of IOW-467A75

Record ID: IOW-467A75
Object type: COIN
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
A complete but worn and crumpled Medieval silver halfgroat of Henry VI (1422-1461), minted at Calais. Annulet issue, 1422-1427. Initial mark: cross V. (North 1991: 74, ref: 1429). Obverse: +hENRIC DI GRA REX ANGL Z FR (saltire stops); Crowned bust facing within a tressure of nine arches (annulets by neck). Reverse: POSVI (annulet) /DEVm (double saltire stops) /ADIVT/[ ] (I have made God my Helper); [ VIL]/LA (double saltire stops) /CAL/I[S); Long cross dividing the inscriptions with three pellets in each quadrant. An annulet in VIL and CAL quadrants. Diameter: 21.5mm. Weight: 1.61g.…
Created on: Thursday 10th May 2018
Last updated: Sunday 20th May 2018
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 186
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 187
  • Mean quantity: 1.005
  • Maximum: 2

Filter your search

1 - 20 of 186 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.