Record ID: WREX-6511C4
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Denbighshire
Workflow stage: Awaiting validation
Cast copper alloy, shield-shaped, heraldic harness pendant of probable 14th-century date (c.1250 - 1450). The pendant is mostly complete apart from the suspension loop which is partially missing. An integral cast suspension loop located at the centre of the upper edge of the pendant is partially intact with traces of gilding. The loop is set at an angle of 90 degrees to the plane of the pendant. The pierced loop is incomplete. The front face of the pendant has a red field of enamel with a cross patoncé at the centre.There are traces of gilding which suggests the cross was origin…
Created on: Thursday 5th April 2018
Last updated: Saturday 13th November 2021
Spatial data recorded. This findspot is known as 'Llanbedr Dyffryn Clwyd', grid reference and parish protected.

Record ID: WAW-64EB7E
Object type: SCABBARD
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval to Post Medieval (15th to 16th century) scabbard chape: The front plate remains of a cast copper alloy composite chape. The plate is an elongated sub-triangle in plan and 'n' shaped in section. At the lower tip of the chape is a small knop. The upper edge has a sub-'W' shape. There is a single transverse ridge across the outer face, close to the upper edge. The reverse is undecorated and the lower portion of the chape has traces of a back plate. The chape has traces of a mottled dark green patina. The chape measures 50.52mm in length, 27.92mm width, and is 5.69mm thick. It w…
Created on: Thursday 5th April 2018
Last updated: Monday 30th April 2018
Spatial data recorded. This findspot is known as 'Near Studley', grid reference and parish protected.

Record ID: WAW-64CBEB
Object type: VESSEL
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval to Post Medieval (c. 1100 until c. 1850) cooking vessel fragment: The fragment is sub semi-circular in plan which is thickened and an integral sub-rectangular, narrowed block at the lower edge. The lower portion has fine horizontal striations on the exterior and a smooth concave interior. The breaks are not recent. In the centre of the upper portion there is an elongated drop-shaped hole in the centre. This hole is where the handle or chain would be suspended from and the upper edge is worn. Just below the perforation, on one face there is a horizontal ridge which is triangul…
Created on: Thursday 5th April 2018
Last updated: Monday 30th April 2018
Spatial data recorded. This findspot is known as 'Near Studley', grid reference and parish protected.

Record ID: WAW-64AC4A
Object type: RING
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
Iron Age to Medieval (150 BC to 15th century) ring: A copper alloy sub-oval copper alloy ring with a bi-convex section with rounded corners. A small portion of the exterior edge is slightly straight which may be part of the casting process. The surface of the ring has an incomplete light brown patina. It measures 29.54mm long, 28.74mm wide and 3.39mm thick. It weighs 5.97g. Similar rings are illustrated in Jackson (1990) Nos. 152-155 which are described as harness fittings. There are possibly other uses of such a type of suspension loop, but these are also seen in the Medieval p…
Created on: Thursday 5th April 2018
Last updated: Monday 30th April 2018
Spatial data recorded.

Record ID: WREX-644E69
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A medieval copper alloy suspension mount for a harness pendant dating 13th -14th century. The mount has a slightly domed circular face with two suspension loops projecting from the lower surface and a stud, slightly off centre, on the reverse. The suspension loops appear to have been cast as an integral part of the object, and would have had an axis pin from which the harness pendant suspends.There are possible traces of the axis pin in one of the loops. Length: 21.7mm; width: 16.0mm; thickness including the stud: 10.5mm; weight: 5.1g. See LON-792357 on the database for a simila…
Created on: Thursday 5th April 2018
Last updated: Tuesday 11th December 2018
Spatial data recorded. This findspot is known as 'Atcham', grid reference and parish protected.

Record ID: WREX-643C29
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A medieval copper alloy suspension mount for a harness pendant dating 13th -14th century. This mount has a slightly concaved rectangular face with two suspension loops projecting from the lower surface and two studs on the reverse. The suspension loops appear to have been cast as an integral part of the object, and would have had an axis pin from which the harness pendant suspends. There appears to be some traces of gilding on the right-hand loop.On the reverse are two sub-rectangular studs projected out for the head of the mount. Length: 18.3mm; width: 16.6mm; thickness including …
Created on: Thursday 5th April 2018
Last updated: Tuesday 11th December 2018
Spatial data recorded. This findspot is known as 'Atcham', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-63A70E
Object type: BELL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A virtually complete copper-alloy sheet-metal bell dating to the later Medieval or early Post-Medieval periods, c. 1400-1550. The bell itself is made of three constituent pieces and is spherical in form- the two halves of the body are hemispherical in plan and have been soldered together at a ridged seam running around its circumference. At the apex of the bell is a suspension loop made from a flat rectangular piece of copper alloy sheet, which has been inserted into a hole in the top of the bell and subsequently soldered on. The sound holes and connecting slit have been cut into the …
Created on: Thursday 5th April 2018
Last updated: Monday 23rd April 2018
Spatial data recorded. This findspot is known as 'Nayland-with-Wissington', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-637A84
Object type: KNIFE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete cast copper-alloy collar originating from a knife and dating to the later Medieval or early Post-Medieval periods, c 1400-1550. It is sub-rectangular in plan and 'D' shaped in section, with a large central rectangular aperture where the collar would have slipped onto the blade and a deep slot on one side. Preserved in good condition with an even green patina, it measures 9.86mm long, 15.12mm wide, and 7.87mm thick. It weighs 3.23g. A number of similar knife collars have been recorded on the PAS database, these include LEIC-5F5A53, LEIC-933794 and LEIC-932A96.
Created on: Thursday 5th April 2018
Last updated: Thursday 5th April 2018
Spatial data recorded. This findspot is known as 'Stoke-by-Nayland', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6317DD
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A very worn silver hammered penny struck for Edward I, dating c. 1307-1309. Class 10cf, probably 10cf3 but difficult to ascertain due to wear. Mint of Durham. C.f North 1042.
Created on: Thursday 5th April 2018
Last updated: Thursday 5th April 2018
Spatial data recorded. This findspot is known as 'Stoke-by-Nayland', grid reference and parish protected.

Record ID: NMS-629FE8
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Incomplete, worn and corroded copper alloy armorial horse harness pendant, shield-shaped, with point bent back onto the reverse, suspension-loop broken across perforation, much red emamel survives, surface treatment of metal missing. Width 25.5mm. Extant height (unbent) 42mm. Blazon: ?Or/?Argent a maunch Gules. Probably for Hastings (Or a maunch Gules) or de Tony (Argent a maunch Gules), see Corder (1965), column 403. Late 13th - 14th century.
Created on: Thursday 5th April 2018
Last updated: Saturday 13th November 2021
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-621C62
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Late Saxon to medieval crude, flattened plano-convex lead spindle whorl or weight with central perforation - diameter 24.5mm, height 9mm, hole diameter 7-8mm, weight 27.35g. 11th - 14th century.
Created on: Thursday 5th April 2018
Last updated: Friday 6th April 2018
Spatial data recorded.

Record ID: NMS-620032
Object type: BROOCH
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Medieval copper alloy openwork brooch. Lozengiform frame, rectangular-sectioned, face with a line of multiple pellets between bevelled inner and outer edges, the inner edge bordered by large drilled blind holes. Pin hole at one angle containing a copper alloy pin of flattened D-section. V-shaped groove around outside edge. Length 22.5mm. Width 22.5mm. 2mm thick. c.1300 -c. 1400.
Created on: Thursday 5th April 2018
Last updated: Wednesday 10th February 2021
Spatial data recorded.

Record ID: BUC-61DA62
Object type: FINGER RING
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A complete silver medieval finger ring, dating from 1100-1500 AD. The ring has a central rectangular bezel, which arches out slightly from the main hoop. The rectangular bezel is plain and undecorated. On each side of the bezel are two rectangular projections, projecting out on both sides of the hoop. These are decorated with vertical incised lines. The hoop is oval shaped, and D shaped in cross section. The hoop has been slightly distorted. The ring is a dark grey silver colour. It measures 19.2mm by 18.6mm, and has a maximum thickness of 3.3mm. It weighs 1.59g.
Created on: Thursday 5th April 2018
Last updated: Tuesday 1st May 2018
Spatial data recorded.

Record ID: SF-61DA0E
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A silver hammered halfpenny struck for Edward I, dating c. 1280-1281. Class 3e/Withers' type 1, mint of Newcastle. North 1045/2.
Created on: Thursday 5th April 2018
Last updated: Friday 27th July 2018
Spatial data recorded. This findspot is known as 'Stoke-by-Nayland', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-61C11E
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Incomplete medieval to post-medieval cast copper alloy cooking vessel leg, oval-sectioned with slightly expanded pad foot, damaged hollow upper end. Extant height 56mm. Weight 98.67g. 14th - 17th century.
Created on: Thursday 5th April 2018
Last updated: Friday 31st May 2019
Spatial data recorded.

Record ID: SF-616747
Object type: TOKEN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A worn cast lead-alloy Boy Bishop type token dating to the late Medieval or early Post-Medieval period, c. 1470-1539. This token probably best corresponds to Rigold's series XI, crude uninscribed Ely series (see Rigold 1978, pl. XI, fig. g). Obverse: crude mitre (?) pseudo-legend of strokes around. Reverse: long cross quartering token, three pellets in each angle within inner border, pseudo-legend of wavy lines around.
Created on: Thursday 5th April 2018
Last updated: Wednesday 1st August 2018
Spatial data recorded. This findspot is known as 'Nayland with Wissington', grid reference and parish protected.

Record ID: WREX-616154
Object type: COIN
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
Silver cut halfpenny of John class 5b2 or 5c minted by Pieres at Durham or Chichester and dating to 1205-10. Obverse has bust of the king facing with the legend hENRIC[VS R/EX]. The reverse has a voided short cross with the legend [PIE]RES ON [...]. Diameter: 17.4mm; weight: 0.7g
Created on: Thursday 5th April 2018
Last updated: Thursday 5th April 2018
Spatial data recorded. This findspot is known as 'Selattyn and Gobowen', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-614283
Object type: HARNESS MOUNT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete cast copper-alloy harness pendant suspension mount dating to the Medieval period, c. 1200-1400. It demonstrates a slightly domed sub-circular body (parts of the edges of which are broken away in old damage) with an attachment lug projecting from its rear face. At the base of the mount is a projecting tab with an internal rectangular slot to accomodate the suspension loop of the pendant itself, folded back on itself as a way of securing the accompanying axis bar. Traces of gilding are preserved on the upper surface of the mount. Preserved in fair condition with a rather c…
Created on: Thursday 5th April 2018
Last updated: Friday 20th May 2022
Spatial data recorded. This findspot is known as 'Nayland with Wissington', grid reference and parish protected.

Record ID: WREX-612F4A
Object type: COIN
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
Silver halfpenny of either Henry VI, Edward IV or Henry VII (c. 1422-1509). Obverse has bust of the king facing no visible marks by bust and legends has a letter E either as the first or second letter. Reverse has a long cross, with 3 pellets in each quarter, dividing a blundered legend. The mint is most likely London. Diameter: 12.8mm; weight: 0.3g
Created on: Thursday 5th April 2018
Last updated: Thursday 5th April 2018
Spatial data recorded. This findspot is known as 'Selattyn and Gobowen', grid reference and parish protected.

Record ID: SOM-610B35
Object type: JETTON
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A fragment of a Medieval copper-alloy French/Low Countries jetton of the Duchy of Burgundy dating from AD 1300-1384. The obverse depicts a quartered square topped shield quarterly of France-Burgundy, reverse a probable triple stranded cross fleuretty within a four-arched tressure with a rosette in each angle. cf. Mitchiner (1988: 253) no. 794.
Created on: Thursday 5th April 2018
Last updated: Friday 4th May 2018
Spatial data recorded.

Record ID: WREX-60C575
Object type: COIN
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
Silver penny of Edward III pre-treaty series E, single annulet stops and none on rev, un-barred N's, date is 1354-55/6.Obverse has bust of the king facing with the legend +EDWARDVS REX ANGLI.Reverse has long cross, with 3 pellets in each quarter, dividing the legend CIVI/TAS/LON/DON (no snick in letter V). Diameter: 17.5mm; weight: 1.1g
Created on: Thursday 5th April 2018
Last updated: Thursday 5th April 2018
Spatial data recorded. This findspot is known as 'Selattyn and Gobowen', grid reference and parish protected.

Record ID: WREX-60789C
Object type: COIN
Broad period: MEDIEVAL
County: Denbighshire
Workflow stage: Awaiting validation
A silver broken penny of Henry III class 7b1 or 7b3 minted at Canterbury by an unknown moneyer dating to c.1222-c.1234. Obverse has the head of the king facing with the legend [hENRIC]VS R/E[X]. The reverse has a short cross with the legend +[...] ON CANT. Diameter: 18.16mm; weight: 0.8g
Created on: Thursday 5th April 2018
Last updated: Thursday 5th April 2018
Spatial data recorded. This findspot is known as 'Llanfair Dyffryn Clwyd', grid reference and parish protected.

Record ID: SF-6068E3
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete cast copper-alloy harness pendant dating to the Medieval period, c. 1100-1250. The suspension loop and part of one side are broken in old damage, but otherwise the object is preserved intact. It consists a leaf-shaped plate with a suspension loop turned at a perpendicular plane to the main body of the object at its apex, the upper portion of which is missing. The rear of the pendant is slightly dished and plain, while the front face has been decorated through the means of incised motifs and subsequent gilding, much of which survives intact. The decoration consists of two…
Created on: Thursday 5th April 2018
Last updated: Friday 27th July 2018
Spatial data recorded. This findspot is known as 'Nayland-with-Wissington', grid reference and parish protected.

Record ID: WMID-6041CB
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A Medieval silver half groat of Edward III (AD 1327-1377). Pre-treaty, series C (AD 1351-1352) with reverse barred Roman N. Mint of London. Initial mark: Cross I. North (1991) No. 1148.
Created on: Thursday 5th April 2018
Last updated: Thursday 5th April 2018
Spatial data recorded.

• 

  Image not taken

Record ID: SF-601C3C
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete cast copper-alloy single looped buckle dating to the later Medieval or early Post-Medieval period, c. 1350-1550. The pin is missing, with only the frame surviving intact. It is trapezoidal in plan, with an offset strap bar covered in ferrous corrosion product (most likely the remains of the pin), plain except for grooved decoration visible at the corners of the frame as it turns to form its outer edge. Preserved in fair condition with an even green patina, it measures 11.98mm long, 20.78mm wide, 1.80mm thick at the midpoint of the frame and weighs 1.57g. Similar buckl…
Created on: Thursday 5th April 2018
Last updated: Monday 23rd April 2018
Spatial data recorded. This findspot is known as 'Nayland-with-Wissington', grid reference and parish protected.

Record ID: DENO-601BF1
Object type: PLAQUE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A fragment of a lead alloy plaque or tablet probably of medieval to post medieval date. The fragment is roughly rectangular, the edges are irregular from apparently old breaks. The object is slightly convex, probably from deformation rather than original form. One face has lettering, stamped or incised and infilled with a dark pigment. There appears to be two lines of lettering, both are truncated by the breaks. The lower row has three letters, the center seems to be a capital A in a Latin font. To the left is a circular impression which could be the top part of a B, P or R or poss…
Created on: Thursday 5th April 2018
Last updated: Monday 9th April 2018
Spatial data recorded.

• 

  Image not taken

Record ID: SF-5FD030
Object type: JETTON
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy French jetton of the 'arms of France modern' type dating to the Medieval period, c. 1380-1422. Obverse: three lis in shield. Reverse: triple-stranded cross fleury. Only around thirty percent of the original flan survives, the rest missing in an old break. C.f Mitchiner nos. 440-459.
Created on: Thursday 5th April 2018
Last updated: Tuesday 31st July 2018
Spatial data recorded. This findspot is known as 'Nayland with Wissington', grid reference and parish protected.

Record ID: SOM-5FA159
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Medieval cast copper alloy horse harness pendant with enamelled heraldic decoration. The pendant is in the shape of a square topped shield with a transverse suspension lug projecting from the centre of the top of the shield. The loop is has a sub-circular hole through it, possibly worn. The shield appears to be decorated with: gules three lions passant guardant or with a label of three points azure. A red back ground with three gold lions on it and at the top over one of the lions a blue bar with three short blue bars extending down from it. Only small parts of the enamel survive, mai…
Created on: Thursday 5th April 2018
Last updated: Friday 16th April 2021
Spatial data recorded. This findspot is known as 'Kingsbury Episcopi CP', grid reference and parish protected.

Record ID: NARC-5F71B8
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
A fragment of a copper alloy rotary Key of Medieval date (AD 1100-1500). The bow and handle are missing due to an old abraded break. The retained portion of stem above the bit is a flattened oval in cross section with a concave end. The bit is rectangular. It has rectangular section wards in both the leading and trailing edges creating an "S" shape and the lower section of the bit has six, shallow, vertical wards. The metal is a light green in colour with a slightly pitted patina. Length: 33.21mm, Width (bow): 8.49mm, Thickness (bit): 5.17mm, Weight: 25.2g.
Created on: Thursday 5th April 2018
Last updated: Wednesday 11th April 2018
Spatial data recorded.

Record ID: WMID-5F526F
Object type: VESSEL
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A complete copper-alloy right-angled drop handle from a vessel, of Medieval dating circa AD 1270 -1350. The handle is complete consisting of a hexagonal shaped shaft in cross section. Extending from either end of the shaft at a right angle are two vertical arms which terminate with animal, possible dog headed terminals. The arms are also hexagonal in cross section. There are acorn knops placed at the top corners of the shaft where they join the arms. At the centre of the horizontal shaft is a rounded swelling. This swelling is defined by a circumferential collar at each side. …
Created on: Thursday 5th April 2018
Last updated: Friday 6th April 2018
Spatial data recorded.

• 

  Image not taken

Record ID: SF-5F3AEB
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A very worn and clipped silver hammered penny struck for Edward IV's first reign under Archbishop George Neville, dating c. 1464-1470. G and key by bust. Light coinage, initial mark uncertain. C.f North 1594.
Created on: Thursday 5th April 2018
Last updated: Monday 23rd April 2018
Spatial data recorded. This findspot is known as 'Nayland-with-Wissington', grid reference and parish protected.

Record ID: NARC-5EFCEA
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
A complete copper alloy Casket Key of Medieval date (AD 1150-1450). The key comprises a circular loop, from which an oval cross-sectioned bow extends. A rectangular cross-sectioned bit projects at 90 degrees from the bow. This narrows to a neck, and then expands out again. The bow appears to be hollow at the terminal with the bit. The metal is a light-green in colour with a slightly pitted patina. A number of very similar rotary keys are shown in G. Egan's 'Medieval Households' pages 111-119, more specifically, number 298, pg 112. From the size of the key and the presence of…
Created on: Thursday 5th April 2018
Last updated: Wednesday 11th April 2018
Spatial data recorded.

Record ID: NARC-5EED4E
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A complete copper alloy Harness Pendant of Medieval date (AD 1100 - 1250). The object is circular in plane and concavo-convex in section. From the upper edge of the object an integral suspension loop projects at 90 degrees to the plate. The loop has a central circular perforation. The centre of the plate has an openwork design consisting of an elongated quatrefoil. From the central design is an incised linear pattern of radiating lines. The back of the object is undecorated. The metal is a dark brown in colour with areas of green corrosion. Height: 32.03mm, Width: 23.79mm, Thic…
Created on: Thursday 5th April 2018
Last updated: Wednesday 11th April 2018
Spatial data recorded.

• 

  Image not taken

Record ID: SF-5EE97E
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete silver hammered penny struck for Edward I, dating c. 1280-1281. Class 3c, mint of London. North 1018. A small section of the edge has broken away in old damage.
Created on: Thursday 5th April 2018
Last updated: Monday 23rd April 2018
Spatial data recorded. This findspot is known as 'Nayland-with-Wissington', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-5ECAED
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete and broken silver hammered halfgroat struck for Henry VII, dating c. 1501-1509. Archiepiscopal issue at the mint of York under Archbishop Savage, initial marks: ?/martlet, keys by bust. North 1715, c.f also IOW-EE7746 on the PAS database. The coin has broken into three fragments.
Created on: Thursday 5th April 2018
Last updated: Monday 23rd April 2018
Spatial data recorded. This findspot is known as 'Nayland-with-Wissington', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-5E9D6A
Object type: COIN
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A silver hammered cut halfpenny struck for Henry III, dating c. 1247-1248. Class 2, moneyer Nicole at the mint of London. Sub-class uncertain due to cutting of the coin.
Created on: Thursday 5th April 2018
Last updated: Monday 23rd April 2018
Spatial data recorded. This findspot is known as 'Nayland-with-Wissington', grid reference and parish protected.