Back to simple search | Back to advanced search

    You searched for:

    • Created: Thursday 5th April 2018
    • Sort: objectType

  • Thumbnail image of WAW-64CBEB

Record ID: WAW-64CBEB
Object type: VESSEL
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval to Post Medieval (c. 1100 until c. 1850) cooking vessel fragment: The fragment is sub semi-circular in plan which is thickened and an integral sub-rectangular, narrowed block at the lower edge. The lower portion has fine horizontal striations on the exterior and a smooth concave interior. The breaks are not recent. In the centre of the upper portion there is an elongated drop-shaped hole in the centre. This hole is where the handle or chain would be suspended from and the upper edge is worn. Just below the perforation, on one face there is a horizontal ridge which is triangula…
Created on: Thursday 5th April 2018
Last updated: Monday 30th April 2018
Spatial data recorded. This findspot is known as 'Near Studley', grid reference and parish protected.


  • Image not taken

Record ID: NMS-61C11E
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval to post-medieval cast copper alloy cooking vessel leg, oval-sectioned with slightly expanded pad foot, damaged hollow upper end. Extant height 56mm. Weight 98.67g. 14th - 17th century.
Created on: Thursday 5th April 2018
Last updated: Thursday 5th April 2018
Spatial data recorded.


  • Thumbnail image of WMID-5F526F

Record ID: WMID-5F526F
Object type: VESSEL
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy right-angled drop handle from a vessel, of Medieval dating circa AD 1270 -1350. The handle is complete consisting of a hexagonal shaped shaft in cross section. Extending from either end of the shaft at a right angle are two vertical arms which terminate with animal, possible dog headed terminals. The arms are also hexagonal in cross section. There are acorn knops placed at the top corners of the shaft where they join the arms. At the centre of the horizontal shaft is a rounded swelling. This swelling is defined by a circumferential collar at each side. At th…
Created on: Thursday 5th April 2018
Last updated: Friday 6th April 2018
Spatial data recorded.


  • Thumbnail image of BH-62EE73

Record ID: BH-62EE73
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy object, possibly part of a tankard handle dating to the Roman period. The object comprises a plate which is tongue-shaped in plan and slightly convex in section. Two openwork extensions originally extended from each of the long sides of the plate, of which only a small portion of one remains. The upper surface of the plate is decorated with two marginal ribs, each flanked by two grooves. There are corrosion products and possible lead solder adhering to the underside of the plate. The object measures 45mm in length, 34mm in width and 2mm in thickness.
Created on: Thursday 5th April 2018
Last updated: Tuesday 12th June 2018
No spatial data available.


  • Thumbnail image of WREX-63C941

Record ID: WREX-63C941
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy trade token dating c.1663.Obverse appears to have the cordwainers arms at the centre with the legend CONSTAN[TINE OVERTON].The reverse has the lettering HIS HALF PENY at the centre with IN SALOP [1663] around the edge. (Williamson 1891, 963 No. 84). Diameter: 17.4mm; weight: 1.6g
Created on: Thursday 5th April 2018
Last updated: Thursday 12th April 2018
Spatial data recorded. This findspot is known as 'Atcham', grid reference and parish protected.


  • Thumbnail image of NARC-5FE8EA

Record ID: NARC-5FE8EA
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper-alloy zoomorphic Strap End of Early Medieval date (AD 750-1066). The object is the terminating end of a tongue-shaped strap end. The retained portion tapers to form a rounded terminal in the form of a moulded animal head. There is a sub-rectangular cell at the upper end of the fragment. The lower portion has an incised decoration composed of two transverse lines, between which are two rows of two crescents. Below which the object is faceted with two opposing, upper and lower, sections to form the eyes and snout of the beast. The underside of the strap end is plai…
Created on: Thursday 5th April 2018
Last updated: Wednesday 11th April 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-633EB7
Object type: STEELYARD WEIGHT
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Roman lead steelyard weight, sub pear-shaped, stumps of missing iron loop visible in the narrowed upper end. Height 43mm. Diameter 41mm. Weight 270g. Mid 1st - 4th century.
Created on: Thursday 5th April 2018
Last updated: Thursday 5th April 2018
Spatial data recorded.


  • Image not taken

Record ID: NMS-621C62
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Late Saxon to medieval crude, flattened plano-convex lead spindle whorl or weight with central perforation - diameter 24.5mm, height 9mm, hole diameter 7-8mm, weight 27.35g. 11th - 14th century.
Created on: Thursday 5th April 2018
Last updated: Friday 6th April 2018
Spatial data recorded.


  • Thumbnail image of WREX-650616

Record ID: WREX-650616
Object type: SEAL BOX
Broad period: ROMAN
County: Shropshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Roman Seal box lid with inlaid enamel and miliflori panels, dating from 1st to mid 3rd century AD. The lid is square in plan with two small rounded projections, one on each of the long sides. The upper surface has been divided into three rows of four square shaped cells.Each of the four corner cells contains a black and which chequer-board pattern of miliflori.The other cells are empty but may originally have contained coloured enamel. The underside of the lid is The lid has a green/brown patina. Length: 14.04mm; width: 16.86mm; thickness (including projection): 6.76mm;…
Created on: Thursday 5th April 2018
Last updated: Thursday 10th May 2018
Spatial data recorded. This findspot is known as 'Oswestry', grid reference and parish protected.


  • Thumbnail image of WAW-64EB7E

Record ID: WAW-64EB7E
Object type: SCABBARD
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval to Post Medieval (15th to 16th century) scabbard chape: The front plate remains of a cast copper alloy composite chape. The plate is an elongated sub-triangle in plan and 'n' shaped in section. At the lower tip of the chape is a small knop. The upper edge has a sub-'W' shape. There is a single transverse ridge across the outer face, close to the upper edge. The reverse is undecorated and the lower portion of the chape has traces of a back plate. The chape has traces of a mottled dark green patina. The chape measures 50.52mm in length, 27.92mm width, and is 5.69mm thick. It we…
Created on: Thursday 5th April 2018
Last updated: Monday 30th April 2018
Spatial data recorded. This findspot is known as 'Near Studley', grid reference and parish protected.


  • Thumbnail image of SOM-5E8D89

Record ID: SOM-5E8D89
Object type: RIVET
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A Post-Medieval copper alloy pot mend, consisting of a staple rivet, probably dating to c. AD 1475-1600. The mend is of a lozenge shaped sheet of copper alloy folded in on itself, to create a sub-rectangular plate which would have had two sub-triangular prongs projecting from the reverse; both prongs are lost to a patinated break. Dimensions: length 38.3mm, width 20.8mm tapering to 15.4mm, thickness 1.8mm, 3.6mm along the site of the prong breaks; weight: 5.52g. Egan (2005: 101, nos. 460-463) notes that such pot repairs were in use from the Early Medieval period, but were at their mo…
Created on: Thursday 5th April 2018
Last updated: Tuesday 8th May 2018
Spatial data recorded. This findspot is known as 'Shepton Beauchamp CP', grid reference and parish protected.


  • Thumbnail image of WAW-64AC4A

Record ID: WAW-64AC4A
Object type: RING
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Iron Age to Medieval (150 BC to 15th century) ring: A copper alloy sub-oval copper alloy ring with a bi-convex section with rounded corners. A small portion of the exterior edge is slightly straight which may be part of the casting process. The surface of the ring has an incomplete light brown patina. It measures 29.54mm long, 28.74mm wide and 3.39mm thick. It weighs 5.97g. Similar rings are illustrated in Jackson (1990) Nos. 152-155 which are described as harness fittings. There are possibly other uses of such a type of suspension loop, but these are also seen in the Medieval period…
Created on: Thursday 5th April 2018
Last updated: Monday 30th April 2018
Spatial data recorded.


  • Thumbnail image of DENO-601BF1

Record ID: DENO-601BF1
Object type: PLAQUE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a lead alloy plaque or tablet probably of medieval to post medieval date. The fragment is roughly rectangular, the edges are irregular from apparently old breaks. The object is slightly convex, probably from deformation rather than original form. One face has lettering, stamped or incised and infilled with a dark pigment. There appears to be two lines of lettering, both are truncated by the breaks. The lower row has three letters, the center seems to be a capital A in a Latin font. To the left is a circular impression which could be the top part of a B, P or R or possibl…
Created on: Thursday 5th April 2018
Last updated: Monday 9th April 2018
Spatial data recorded.


  • Thumbnail image of NARC-60149F

Record ID: NARC-60149F
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a Pin of Early-Medieval date (AD 700-850). The retained fragment in head of the pin. The head is polyhedral, taking the form of a cuboid with truncated corners. A single ring-and-dot punchmark decorate each of the four vertical faces, with a single such mark on every remaining face. There is no clear collar, a minor amount of the circular-cross-sectioned shaft is retained. The metal is a dark green in colour with areas of light green corrosion. Length: 11.99mm, Width: 7.06mm, Thickness: 5.52mm, Weight: 2.1g.
Created on: Thursday 5th April 2018
Last updated: Wednesday 11th April 2018
Spatial data recorded.


  • Thumbnail image of WMID-6279E4

Record ID: WMID-6279E4
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy lower blade fragment from a palstave dating to the Middle Bronze Age, circa 1500-1300 BC. The shape of the fragment is sub-triangular in plan and triangular in profile; the cross section at the break is sub-rectangular in form. The blade is broken below the stop ridge, due to this it is uncertain whether this fragment is from a looped - or unlooped palstave variant. The sides of the palstave gently taper from the break to the blade where the tips of the blade protrude markedly. The cutting edge is crescentic and relatively well defined, however it is very worn and the …
Created on: Thursday 5th April 2018
Last updated: Thursday 5th April 2018
Spatial data recorded.


  • Thumbnail image of NARC-5EC5AD

Record ID: NARC-5EC5AD
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy Mount of Post-Medieval date (AD 1600-1700). The object is an openwork figurative strap fitting or mount and is flat in section, circular in plan. The mount takes the form of a crescent moon with a face in profile, and a six point star protruding from the lower portion. There is an integral semi-circular suspension loop. Within the upper portion of the inside of the mount is an irregular plate with an unclear motif. The mount has two attachment spikes on the back. Similar examples can be seen on the Portable Antiquities Scheme database: BERK-789C78, NMS-829E17, …
Created on: Thursday 5th April 2018
Last updated: Wednesday 11th April 2018
Spatial data recorded.


  • Thumbnail image of NARC-5FC70C

Record ID: NARC-5FC70C
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Mount of Early Medieval date (AD 410-1066). The object is a sub-cruciform, sheet of copper alloy, with a single circular perforation and an incised decorative pattern on one face. The perforation is situated at the lower edge of the lower lobe. Others may have been present however all other lobes are broken with the outer edges missing due to old and abraded breaks. The decorative pattern is composed of a central cross within a rhomboid boarder which extends to the retained lobes to form a chevron at each corner of the border/within each lobe. The back of the…
Created on: Thursday 5th April 2018
Last updated: Wednesday 11th April 2018
Spatial data recorded.


  • Thumbnail image of NMS-613BBC

Record ID: NMS-613BBC
Object type: LOCK
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy lock pin dating to the period c. AD 43 - 409. The circular head is 'spindle-shaped' and tapers into a tapering circular-sectioned shank. Cf. Crummy 1983, 124, nos. 4142-3. These are often identified as local pins from a locking mechanism, but may have had other functions such as decorative fittings or furniture handles.
Created on: Thursday 5th April 2018
Last updated: Tuesday 29th May 2018
Spatial data recorded.


  • Thumbnail image of NARC-5E113B

Record ID: NARC-5E113B
Object type: KNIFE
Broad period: PALAEOLITHIC
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A complete flint Handaxe/knife of Upper Palaeolithic to Neolithic date (150,000-3450 BC). The lithic is sub-triangular plan and plano-convex in section. The dorsal surface has long scaled flaking and retains cortex along the proximal left hand edge. There is evidence of hinged flake removal along the mesal section. The distal, right and left hand edges have rough semi-abrupt retouch. The ventral surface has covering scaled flaking with a minor amount of retained cortex along the proximal right hand edge. The majority of both the ventral and distal surfaces are covered with recortificat…
Created on: Thursday 5th April 2018
Last updated: Wednesday 11th April 2018
Spatial data recorded.


  • Image not taken

Record ID: SF-637A84
Object type: KNIFE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy collar originating from a knife and dating to the later Medieval or early Post-Medieval periods, c 1400-1550. It is sub-rectangular in plan and 'D' shaped in section, with a large central rectangular aperture where the collar would have slipped onto the blade and a deep slot on one side. Preserved in good condition with an even green patina, it measures 9.86mm long, 15.12mm wide, and 7.87mm thick. It weighs 3.23g. A number of similar knife collars have been recorded on the PAS database, these include LEIC-5F5A53, LEIC-933794 and LEIC-932A96.
Created on: Thursday 5th April 2018
Last updated: Thursday 5th April 2018
Spatial data recorded. This findspot is known as 'Stoke-by-Nayland', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 81
Search server index: objects

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 83
  • Mean quantity: 1.025
  • Maximum: 2

Filter your search

1 - 20 of 81 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.