Back to simple search | Back to advanced search

    You searched for:

    • Created: Thursday 1st March 2018

  • Thumbnail image of LEIC-85C516

Record ID: LEIC-85C516
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy coin, probably a radiate or nummus of an uncertain ruler. Thecoin is in poor,corroded condition, is 17mm in diameter and weighs 2.44g.
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of LEIC-85A8F1

Record ID: LEIC-85A8F1
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy nummus of the House of Constantine, GLORIA EXERCITVS issue, two soldiers with two standards reverse. The coin is in poor condition, is 17mm in diameter and weighs 1.52g.
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of BERK-84C7D3

Record ID: BERK-84C7D3
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A worn copper-alloy nummus from the House of Constantine, probably of Constantius II, dating to the period AD 325 - 326 (Reece Period 16). PROVIDENTIAE CAESS reverse type, depicting camp or town gateway with two towers. The coin has been pierced twice.
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of DEV-84A87C

Record ID: DEV-84A87C
Object type: BROOCH
Broad period: ROMAN
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
An abraded and fragmentary Roman copper alloy hinged colchester derivative developed T-shaped brooch, probably dating to c. AD 75-150. The fragment comprises of the upper bow and incomplete wings only, the lower bow, pin, right wing and partial left wing being lost. At the head of the brooch the wings survive to a width of 20.1mm; the right wing is lost, the left missing its tip. The wings are cylindrical, c. 5.7mm in diameter, and with a large slot cut into the reverse to accomodate a hinged pin; now lost. The remains of an iron axis bar remain in situ. The bow expands from the head …
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of SUSS-84A35D

Record ID: SUSS-84A35D
Object type: MOUNT
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy, Post Medieval, mount, possibly for use on furniture, AD.1600-1850. The mount is formed of two sub-triangular lobes that taper away from each other and are join by a central transverse bar. There is a slight hook on the terminals of the triangular lobes possibly where it is a part of a larger mount. The whole object has a dark green patina. The exact function of the piece is unknown The mount measures 68.8mm long, 15.1mm wide, 3.4mm thick and weighs 14.89 grams.
Created on: Thursday 1st March 2018
Last updated: Tuesday 10th April 2018
Spatial data recorded.


  • Thumbnail image of BERK-84A26C

Record ID: BERK-84A26C
Object type: PIN
Broad period: UNKNOWN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy pin fragment of uncertain date. The pin has a plain globular or spherical head with indentation between the head and the shank, but not a collar as is usually seen. The shank of the pin is short and terminates in a point; it may have been repointed after a break as pin shanks are usually longer. It is hard to confidently date this object; if Middle Saxon it would be similar to Flixborough type 110, or if Roman (which is probably more likely), it would fit in to Cool's Group 2A. Suggested date: Unknown; Early Roman to Early Medieval, AD 75-850.
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of BERK-844011

Record ID: BERK-844011
Object type: COIN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A broken or possibly intentionally cut copper alloy rose farthing of Charles I (AD 1625 - 1649), dating to the period AD 1636 - 1644. Unclear initial mark.
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of SUSS-843133

Record ID: SUSS-843133
Object type: VESSEL
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
An incomplete, spout from a ewer or barrel tap, AD.1400-1800. The object has a large pipe style bowl with damage around the upper rim suggesting it has broken away from something. The bowl curves round into a tapering stem that is hollow. Beneath the bowl is a square foot rest to support it, the base of which has the letter V engraved on it. The exact function of this object is unknown, suggestions for similar objects include BERK-32983C a type of pipe tamper, though the size of this object possible precludes this choice. The pipe measures 65.2mm long, 19.6 mm diameter on the bowl, 12…
Created on: Thursday 1st March 2018
Last updated: Tuesday 10th April 2018
Spatial data recorded.


  • Image not taken

Record ID: BERK-843009
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A very worn and incomplete copper alloy Roman radiate or nummus, dating from c. AD 260-409. The coin is too worn for further identification.
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Image not taken

Record ID: BERK-842291
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A very worn and incomplete copper alloy Roman nummus, probably from the House of Constantine (AD 306-361). The coin is too worn for further identification.
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of BERK-83FA60

Record ID: BERK-83FA60
Object type: COIN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete silver post-medieval sixpence of Elizabeth I (AD 1558-1603) dated (AD) 1565. Rose initial mark, mint of London. North N1997.
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of BERK-83ABC0

Record ID: BERK-83ABC0
Object type: BRACELET
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a decorative copper alloy strip, probably a bracelet fragment of later Roman date. The fragment has two rows of poorly cast crescents down the length of the upper side while the underside is flat, plain and undecorated. No terminals are evident so this may be a central section of a bracelet. A wide variety of decorated thin-cuff bracelets are known from the third and fourth centuries AD.
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of SUSS-83923E

Record ID: SUSS-83923E
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Post Medieval strap fitting or belt mount, dating to AD 1600-1700. The mount is sub triangular shaped with rounded edges. The surface is coroded but there is a small trace of gilding. On the reverse there are two integral lugs, one is worn and broken They bend inwards towards each other. On the surface above the lug at the smaller end is collar decorattion. Above the other lug the surface is rounded. The mount has a brownish green patina. It measures 58.9mm long, 15.4mm wide tapering to 6.3mm. It is 3.4mm thick and it weighs 19.2 grams. Similar fittings c…
Created on: Thursday 1st March 2018
Last updated: Tuesday 10th April 2018
Spatial data recorded.


  • Thumbnail image of BERK-8365CB

Record ID: BERK-8365CB
Object type: CLAY PIPE (SMOKING)
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete moulded clay pipe of late post-medieval (late 18th-19th century) date. The pipe has a rounded bowl which has suffered some damage, and a short length of the pipe stem remaining. The pipe bowl is decorated with projecting stipples of clay and a rouletting around the rim - there is no maker's mark or other decoration. This pipe may have been of they type which has a very long, and therefore brittle stem, popular in the 19th century.
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of BERK-834E0F

Record ID: BERK-834E0F
Object type: BELL
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy post-Medieval spherical animal 'crotal' bell (AD 1600-1800). The bell as a sub-rectangular suspension loop at the top and an integral waist band running circumferentially around the centre of the bell. There is considerable damage to the lower half of the bell. There is no decoration on either hemisphere.
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of BUC-834051

Record ID: BUC-834051
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Central Bedfordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete medieval lead alloy seal matrix dating from c. AD 1200-1400. The seal is circular, with a rounded loop on the reverse at 12 oclock. The loop is very worn, and no longer has the hole pierced through. The central motif of the seal is a fleur de lis design, with a circular border. This is surrounded by the legend '[S'] WALTER I I A COP'. The seal is a brown grey colour. The seal matrix measures 28.6mm in length, 26.9mm in width, 11.1mm in thickness, and weighs 18.28g.
Created on: Thursday 1st March 2018
Last updated: Wednesday 7th March 2018
Spatial data recorded.


  • Thumbnail image of BERK-8310E1

Record ID: BERK-8310E1
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A large and incomplete cast copper alloy shoe buckle of post-medieval date. The buckle frame is 50% complete, with a frame decorated with moulded ring-and-dot motifs in the centre of each remaing arm between linear ribs. One section of the frame is slightly swollen and a small hole through the edge of the frame indicates where the separate spindle whould have been located. The underside of the frame is undecorated. This buckle dates from c. AD 1600-1820.
Created on: Thursday 1st March 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of PUBLIC-830FC8

Record ID: PUBLIC-830FC8
Object type: KEY (LOCKING)
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation Find awaiting validation
An incomplete post Medieval cast iron rotary key dating to the 17th - 18th century. The key has a kidney shaped flat cross section bow with a central triangular projection from the shank and another projection from the top which may originally have joined together across the bow. The shank is circular in cross section. There is a series of collars or throating below the bow and the shank is hollow and tapering for 55.43mm to its end where there is a piece missing from the back of the hollow shaft. It has been bent to about 1/3 of its total length at the bit end. The simple bit is flat …
Created on: Thursday 1st March 2018
Last updated: Monday 9th April 2018
Spatial data recorded.


  • Thumbnail image of SF-830C95

Record ID: SF-830C95
Object type: BROOCH
Broad period: IRON AGE
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy Late Iron Age to Early Roman brooch of the Rosette Type, dating to AD 20-60. The spring-case has an oval cross-section and a sub-rectangular shape in plan. It is damaged on its back face showing the coil spring still in situ; the pin is missing. The sub-oval integral cast disc plate joins the lower part of the front face of the spring case. The disc has a circular hole in the centre and several concentric shallow grooves along its circumference. The sides and the lower edge of the disc have breaks, now worn; the foot and catch plate are missing. The brooch i…
Created on: Thursday 1st March 2018
Last updated: Tuesday 6th March 2018
Spatial data recorded. This findspot is known as 'Eyke', grid reference and parish protected.


  • Image not taken

Record ID: GLO-82F924
Object type: COIN
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation Find awaiting validation
~~Nummus of Constantine I dated to AD 321-324 (Reece 16), Obverse: laureate bust right CONSTAN-TINVS AVG Reverse: globe on altar BEATA TRANQVILLITAS in ex [.]LON
Created on: Thursday 1st March 2018
Last updated: Tuesday 20th March 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 133
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 137
  • Mean quantity: 1.030
  • Maximum: 3

Filter your search

1 - 20 of 133 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.