Back to simple search | Back to advanced search

    You searched for:

    • Created: Friday 23rd February 2018

  • Thumbnail image of SWYOR-04FF1B

Record ID: SWYOR-04FF1B
Object type: MICROLITH
Broad period: MESOLITHIC
County: Calderdale
Workflow stage: Awaiting validation Find awaiting validation
A flint microlith of Mesolithic date, about 10000 - 4000 BC. It is formed on light grey flint and is sub rectangular in plan, with a pointed proximal end, and is D shaped in cross-section. There is short, sub-parallel, abrupt retouch along the right edge. It is 34mm long, 9.4mm wide and 3mm thick. 1.06g.
Created on: Friday 23rd February 2018
Last updated: Wednesday 7th March 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-04E873

Record ID: SWYOR-04E873
Object type: DEBITAGE
Broad period: MESOLITHIC
County: Calderdale
Workflow stage: Awaiting validation Find awaiting validation
Three pieces of flint debitage of Mesolithic or Neolithic date, about 10,000 - 2200 BC. Two blades and one flake. 1. A flint secondary flake formed on tan flint. Cortex on the proximal end and previous removal scars on the dorsal face. 2. A chert tertiary blade. 3 A flint secondary blade formed on tan flint with some cortex on the dorsal face.
Created on: Friday 23rd February 2018
Last updated: Wednesday 7th March 2018
Spatial data recorded.


  • Thumbnail image of KENT-04D1E3

Record ID: KENT-04D1E3
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A biface cast copper-alloy token likely of 18th or 19th century date. Description: The token's upper face is decorated with a capital H proceeded by fleur-de-lis all within a raised border cast in relief. Measurements: 27.41mm in diameter, 1.93mm thick and 6.13g in weight. Discussion: Although probably dating from after 1700, this object may relate to the Honeychild Manor which was frequently home to powerful individuals, many of whom were very influential on Romney Marsh. It may, therefore be relevant to the Fifth Continent project on Romney Marsh.
Created on: Friday 23rd February 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-04C1C1

Record ID: SWYOR-04C1C1
Object type: DEBITAGE
Broad period: MESOLITHIC
County: Calderdale
Workflow stage: Awaiting validation Find awaiting validation
A flint debitage flake of Mesolithic or Neolithic date, about 10,000 - 2200 BC. It is formed on mottled tan and grey flint and is sub rectangular in plan, with a rounded proximal end, and a slanting distal end with a projection to the side at the longer side. There is some edge damage and some previous removal scars on the dorsal face. It is 34.6mm long, 22.8mm wide and 4.7mm thick. 3.49g.
Created on: Friday 23rd February 2018
Last updated: Wednesday 7th March 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-049C6A

Record ID: SWYOR-049C6A
Object type: MICROLITH
Broad period: MESOLITHIC
County: Bradford
Workflow stage: Awaiting validation Find awaiting validation
A flint microlith of Late Mesolithic date, about 8000 - 4000 BC. It is a Group B microlith. It is formed on dark grey chert and is sub rectangular in plan, with a slanting end, and is triangular in cross-section. There is short, sub-parallel, abrupt retouch along the shorter long edge. It is 10.5mm long, 3.9mm wide and 1.4mm thick. 0.04g.
Created on: Friday 23rd February 2018
Last updated: Wednesday 7th March 2018
Spatial data recorded.


  • Thumbnail image of KENT-04964F

Record ID: KENT-04964F
Object type: VESSEL
Broad period: ROMAN
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper-alloy Roman figurative vessel escutcheon probably dating to the first century AD. Description: The escutcheon takes the form of a female head cast in high relief, representing the front half of the head and face. The has a squashed flat nose oval eyes and outing mouth, details of the eyebrows and eyes are well executed. The hair is similarly well executed, with clear even parting framed by long double plaits formed into buns on each side of the face and a second plait between them. Below the face is a slightly textured short solid semicircle possibly intended…
Created on: Friday 23rd February 2018
Last updated: Friday 23rd February 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-0491F6

Record ID: SWYOR-0491F6
Object type: MICROLITH
Broad period: MESOLITHIC
County: Bradford
Workflow stage: Awaiting validation Find awaiting validation
A flint microlith of Late Mesolithic date, about 8000 - 4000 BC. It is a Group B microlith. It is formed on light grey flint and is sub rectangular in plan, with a slanting end, and is trapezoid in cross-section. There is short, sub-parallel, abrupt retouch along one long edge and the slanting end. It is 12.9mm long, 4.3mm wide and 2.3mm thick. 0.13g.
Created on: Friday 23rd February 2018
Last updated: Wednesday 7th March 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-048239

Record ID: SWYOR-048239
Object type: MICROLITH
Broad period: MESOLITHIC
County: Bradford
Workflow stage: Awaiting validation Find awaiting validation
A flint microlith of Late Mesolithic date, about 8000 - 4000 BC. It is a Group B microlith. It is formed on light grey flint and is sub recatngular in plan, with a slanting end and triangular in cross-section. There is short, sub-parallel, abrupt retouch along one long edge. It is 9mm long, 3.6mm wide and 1.6mm thick. 0.04g.
Created on: Friday 23rd February 2018
Last updated: Wednesday 7th March 2018
Spatial data recorded.


  • Thumbnail image of WILT-047110

Record ID: WILT-047110
Object type: HOARD
Broad period: ROMAN
County: Wiltshire
Workflow stage: Published Find published
A hoard of Roman copper-alloy vessels consisting of a symmetrical flanged bowl strainer, a Bassin Uni, a carinated basin with a foot ring and an Irchester bowl. The vessels were part of a structured Roman deposit with each vessel nestled within another and all contained within the Irchester bowl. The vessels are fragmentary and fragile, the carinated basin and Irchester bowl are in multiple pieces and the bases of the Irchester bowl, cauldron and the Bassin Uni have become detached. The symmetrical flanged bowl strainer: The strainer is circular (260mm in diameter) with a flat out tu…
Created on: Friday 23rd February 2018
Last updated: Thursday 24th May 2018
Spatial data recorded. This findspot is known as 'Wilcot', grid reference and parish protected.


  • Thumbnail image of WILT-04582A

Record ID: WILT-04582A
Object type: BUCKLE
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval copper alloy single loop buckle with forked spacer dating to c AD 1350-1450. The buckle has an integral forked spacer onto which originally front and back plates had been soldered. The loop of the buckle is ovoid with a small point at the opposite side to the pin and with a small indentation to hold the pin. The loop of the buckl is attached to the remains of the spacer plates, the long ends have broken off. the pin comprises a flat pointed strip of copper alloy which has been wrapped around the bar between the spacer plates. The spacer plates are slightly thinner than the l…
Created on: Friday 23rd February 2018
Last updated: Tuesday 20th March 2018
Spatial data recorded. This findspot is known as 'Malmesbury', grid reference and parish protected.


  • Thumbnail image of PUBLIC-0455AD

Record ID: PUBLIC-0455AD
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hertfordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper-alloy horse harness or belt stud mount dating to the sixteenth or seventeenth century AD. The mount possesses a body which is heart-shaped in plan with a trilobate extension at the apex of the heart. On the underside, there extend two integrally-cast attachment lugs. There is minor surface damage and some corosion to the front of the mount. Otherwise it is in good condition. The stud mount measures 38mm in length, 21mm in width and weighs 5.91g.
Created on: Friday 23rd February 2018
Last updated: Tuesday 27th February 2018
Spatial data recorded. This findspot is known as 'Nr Codicote', grid reference and parish protected.


  • Thumbnail image of WILT-0450B7

Record ID: WILT-0450B7
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete post medieval, copper alloy, asymmetrical, flat, decorative strap fitting with separate rivet, probably once a sword belt fitting dating to AD1600 -1700 . There is an early break close to the rivet and so only part of the mount is extant. It has a moulded and engraved foliate design with a rounded, D section knop at one end (part missing), under which is a collar and narrowed neck leading to a circular plate pierced with a crcular perforation. The edges here are decorated with wing or leaf like extensions with some damage. The mount then widens again to what may have bee…
Created on: Friday 23rd February 2018
Last updated: Friday 9th March 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-044E65

Record ID: SWYOR-044E65
Object type: MICROLITH
Broad period: MESOLITHIC
County: Bradford
Workflow stage: Awaiting validation Find awaiting validation
A flint microlith of Late Mesolithic date, about 8000 - 4000 BC. It is a Group B microlith. It is formed on heavily patinated flint and is triangular in plan and D-shaped in cross-section. There is short, sub-parallel, abrupt retouch along both long edges, which taper to a point at the proximal end, and a hinged termination at the distal end. It is 21.8mm long, 7.2mm wide and 3mm thick. 0.45g.
Created on: Friday 23rd February 2018
Last updated: Wednesday 7th March 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-042CD2

Record ID: SWYOR-042CD2
Object type: MICROLITH
Broad period: MESOLITHIC
County: Calderdale
Workflow stage: Awaiting validation Find awaiting validation
A flint microlith of Late Mesolithic date, about 8000 - 4000 BC. It is a Group B geometric rod shaped microlith. It is formed on translucent white flint and is sub rectangular in plan and trapezoid in cross-section. There is short, sub-parallel, abrupt retouch along both long edges, which taper to a point at the distal end. It is 15.8mm long, 4.4mm wide and 2mm thick. 2.77g.
Created on: Friday 23rd February 2018
Last updated: Wednesday 7th March 2018
Spatial data recorded.


  • Thumbnail image of WILT-0427A7

Record ID: WILT-0427A7
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy Hod Hill brooch dating to AD 43-75. The brooch is incomplete and all that remains is the top section of the bow. At the top the wings are rolled forward with an indentation in the centre where the pin mechanism fitted. Below the wings the bow narrows and continues downwards with slight narrowing. The bow has a raised lip at the edge and two raised ribs of decoration with sawtooth pattern down them. At the bottom of the decoration the bow widens and has then broken. The back is undecorated. There is evidence of silvering or tinning down the groove between the two ro…
Created on: Friday 23rd February 2018
Last updated: Tuesday 20th March 2018
Spatial data recorded. This findspot is known as 'Colerne', grid reference and parish protected.


  • Thumbnail image of SOM-041FE5

Record ID: SOM-041FE5
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy coin of Constantius II, dating to c. AD 348-350 (Reece Period 18). FEL TEMP REPARATIO reverse type, depicting the emperor advancing left on galley, holding phoenix and standard, with a victory steering. Uncertain mint.
Created on: Friday 23rd February 2018
Last updated: Tuesday 27th February 2018
Spatial data recorded.


  • Thumbnail image of SWYOR-04104C

Record ID: SWYOR-04104C
Object type: RETOUCHED FLAKE
Broad period: MESOLITHIC
County: Calderdale
Workflow stage: Awaiting validation Find awaiting validation
A retouched flint blade of Mesolithic date, about 9000 - 4000 BC. It is formed on opaque yellow cream flint and is patinated. It is rectangular in plan and triangular in cross-section. There is some edge damaged to the long edges, but there is short,sub-parallel, abrupt retouch on the wider, distal end. It is 28.6mm long, 8.7mm wide and 4.8mm thick. 1.35g.
Created on: Friday 23rd February 2018
Last updated: Wednesday 21st March 2018
Spatial data recorded.


  • Thumbnail image of KENT-03FFC4

Record ID: KENT-03FFC4
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast later Early-Medieval Anglo-Scandinavian (11th Century), copper-alloy stirrup-strap mount of Williams Class A type 11a (1997, 58). Description: The mount is sub-triangular in plan with a straight base edge and two long slightly convex edges converging at the now broken apex, The eye of the lion has been drilled creating a new rivet hole after the pinnacle one snapped away. The front of the mount depicts a right-facing lion, standing on three legs with one foreleg raised and the head bent up and back, facing upwards; executed in high relief. The tail curls betwee…
Created on: Friday 23rd February 2018
Last updated: Thursday 1st March 2018
Spatial data recorded.


  • Thumbnail image of PUBLIC-03E28D

Record ID: PUBLIC-03E28D
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy rotary key of roughly medieval date. This artefact weighs 28.29g and measures 74.14mm in length. The bow is an elongated quatrefoil that gives the bow a sub-lozenge appearance. The bow is decorated with four openwork circles, one placed in each corner of the quatrefoil. The longitude circles are larger measuring approximately 10mm in diameter and the transverse circles are approximatly 6mm in diameter. The bow accounts for 39.3mm of the total key length and is 4.8mm in thickness. The bow is visually separated from the integral shaft by a decorative double col…
Created on: Friday 23rd February 2018
Last updated: Friday 18th May 2018
Spatial data recorded.


  • Thumbnail image of WILT-03C5FB

Record ID: WILT-03C5FB
Object type: CLASP
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy zoomorphic clasp with decorative rigid integral plate, dating to c AD 1250 - 1400. An oval frame expands at the outer end of the clasp into a sub rectangular piece, convex U shape in section, which is the head of a beast, with broad nose or snout, cheeks, almond shape eyes with pronounced brow ridge, and, on the frame itself, moulded longitudinal ridges which represent the hair. On each side of the frame are moulded representations of pointed ears. The integral rectangular plate, also a convex U shape in section, is decorated wth a central spine-like lo…
Created on: Friday 23rd February 2018
Last updated: Friday 9th March 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 150
Search server index: asgard

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 157
  • Mean quantity: 1.047
  • Maximum: 4

Filter your search

1 - 20 of 150 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.