Back to simple search | Back to advanced search

    You searched for:

    • Created: Tuesday 9th December 2014
    • Sort: updated

  • Thumbnail image of NMGW-724AEC

Record ID: NMGW-724AEC
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Late medieval or early post-medieval copper alloy book-clasp, of Howsam type A.3, probably of 15th to 17th century date. The clasp is near-complete, with some peripheral loss (with a length of 67.9mm, a depth of 5.3mm and a weight of 15.8g). The clasp is made from two-pieces of sheet copper alloy, attached using three rivets. One larger rivet at the centre, towards the clasp and two smaller rivets at the attachment end. Between the two sheets traces of the leather book cover survive. The front plate (0.9mm thick) is decorative and has an expanded end (with a width of 23.1mm), enhanced …
Created on: Tuesday 9th December 2014
Last updated: Monday 17th December 2018
Spatial data recorded.


  • Thumbnail image of BUC-715148

Record ID: BUC-715148
Object type: COIN
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy barbarous radiate, dating to the period AD c.275-c.285 (Reece period 14).
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th October 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BM-751115

Record ID: BM-751115
Object type: SHOE
Broad period: ROMAN
County: Darlington
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cowhide shoe, possibly a military boot dating to the late second or early third century AD. The shoe has been designed to be worn on the left foot. The shoe is swayed and very pointed. The toe turns noticeably inward. The toe is very pointed and tapers to the tread of the foot. The waist and seat are almost straight, with little variation in width. A single line of studs runs around the outer edge of the shoe, with four straight lines in the tread down to the waist. There is a single line in the waist towards the outer edge, but otherwise the waist is open and free of stu…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th October 2018
Spatial data recorded.


  • Thumbnail image of BUC-714946

Record ID: BUC-714946
Object type: COIN
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded copper-alloy nummus, dating to the period AD c.330-402.
Created on: Tuesday 9th December 2014
Last updated: Friday 5th October 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-71C4D9

Record ID: BUC-71C4D9
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy frame, possibly from a post-Medieval buckle. The frame is rectangular in cross section and sub-rectangular in plan, having an aperture of elongated keyhole shape. There is no pin and no obvious point for the attachment of one.
Created on: Tuesday 9th December 2014
Last updated: Saturday 25th August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-71A8F4

Record ID: BUC-71A8F4
Object type: BUCKLE
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy single-loop buckle of medieval date. The frame is D-shaped in plan, has sloping upper surfaces, a flat underside and an offset axis bar. The two tabs linking the rectangular front plate and incomplete back plate have been folded around this bar. Two copper-alloy rivets, located at the corners at the frame end of the plate, join together the upper and lower plates, with two empty rivet holes at the opposite end of the upper plate. The now-missing pin would originally have been looped around the axis bar via the space between the two aforementioned plate tabs.
Created on: Tuesday 9th December 2014
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-7172D1

Record ID: BUC-7172D1
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
Just over half of a copper-alloy double-loop buckle of post-Medieval date. The intact side of the frame is sub-pentagonal in plan, the axis bar having a rounded lobe at either end. The widest part of the frame is the pin rest, located at the right-hand end. The buckle has flat surfaces, bevelled edges and a possible white metal coating.
Created on: Tuesday 9th December 2014
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-717C69

Record ID: BUC-717C69
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy double-loop buckle of post-Medieval date. The symmetrical frame has two pentagonal sides, with the central axis bar forming the inner limb of each side. The widest parts are the pointed pin rests at the right- and left-hand ends respectively.The frame is of flat section, has bevelled edges and a white metal coating. The pin is missing.
Created on: Tuesday 9th December 2014
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-7187CD

Record ID: BUC-7187CD
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy double-loop buckle of post-Medieval date. The symmetrical frame has two broadly D-shaped sides which are of flat to D-shaped cross section. The pin rest at the left-hand end of the frame comprises a a projecting, sub-rectangular tab, adjacent to which is a series of transverse grooves in the surface of the frame. A similar tab is also located at the centre of the frame's right-hand end, but the aforementioned grooves appear to be absent. The central axis bar is of oval cross section and has a pointed knop at either end; looped around this bar is the pin, which has a D-s…
Created on: Tuesday 9th December 2014
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-7191BE

Record ID: BUC-7191BE
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy double-loop buckle of post-Medieval date. The symmetrical frame has two broadly D-shaped sides which are of flat to D-shaped cross section. A scallop-shaped pin rest projects outwards from the centre of both the right- and left-hand sides of the frame. The central axis bar is of oval cross section and has a pointed lobe at either end; the pin, loosely looped around this bar, has a D-shaped cross section and straight sides which converge towards the point.
Created on: Tuesday 9th December 2014
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-719F17

Record ID: BUC-719F17
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper-alloy double-loop buckle of post-Medieval date. The remaining piece of the frame indicates that this was once a symmetrical buckle with two D-shaped sides. Just under half of the left-hand side of the frame survives, along with the central axis bar and a small remnant of the right-hand side. The more complete side is generally of flat section, but there is a miscast area at the top, where the upper surface of the frame is concave. The axis bar is also poorly finished, having an irregular surface in parts. Incised lines at the top left corner of the frame may rep…
Created on: Tuesday 9th December 2014
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-71B1FA

Record ID: BUC-71B1FA
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy double-loop buckle of post-Medieval date. The symmetrical frame has two sides that are broadly 'D' shaped, both in plan and cross section, but with a wider, flat-surfaced, pointed pin rest at the centre of both the right- and left-hand sides. The pin, loosely looped around the central axis bar, has a trapezoidal cross section and straight sides which taper to a pointed tip.
Created on: Tuesday 9th December 2014
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-71BD0C

Record ID: BUC-71BD0C
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy double-loop buckle of post-Medieval date. The intact side of the frame is 'D' shaped, with steep inner edges and flat upper surfaces that slope downwards and outwards. The axis bar has an oval cross section. Little remains of the other side of the frame, but the surviving portion suggests this was originally a symmetrical buckle. Looped loosely around the axis bar, the pin has a D-shaped cross section and parallel sides throughout most of its length, tapering only at the tip, which overhangs the edge of the frame.
Created on: Tuesday 9th December 2014
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-71E1DD

Record ID: BUC-71E1DD
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded iron buckle of post-Medieval date. The frame is circular in plan and has a D-shaped or pointed-oval cross section. The pin, which has been loosely looped around the frame, has a flat section and straight sides which converge towards the distal end, from which the tip has been lost.
Created on: Tuesday 9th December 2014
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-71D3E3

Record ID: BUC-71D3E3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete and distorted copper-alloy frame from a medieval single-loop buckle. The frame comprises a strip of flat section which narrows towards the inner side, where it terminates in two opposing axis bar cylinders. The axis bar is largely missing, but iron corrosion on both cylinders attests to its former composition. Longitudinal lines of rocker-arm grooves decorate the outer face of the frame.
Created on: Tuesday 9th December 2014
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-71F915

Record ID: BUC-71F915
Object type: BUCKLE
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy double-loop buckle frame of medieval to post-Medieval date. A central axis bar divides the frame into two sub-rectangular sides. The right- and left-hand sides of the frame are decorated by a series of moulded lobes, the bottom sides bow outwards and the top sides are almost horizontal. The axis bar has a trapezoidal cross section and attached traces of a white metal coating, but the pin is missing.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 21st August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-7203E8

Record ID: BUC-7203E8
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy double-loop buckle of early post-Medieval date. The symmetrical frame has two D-shaped sides, each with a moulded rosette pin rest at the centre. The upper surfaces of the frame slope downwards and outwards; the axis bar has a sub-triangular cross section, a pointed lobe at each end and is missing its pin.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 21st August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-720DCA

Record ID: BUC-720DCA
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy double-looped oval buckle frame of post-medieval date (c. 1550-1650). The frame has a moulded pin rest formed of a double transverse central ridge, flanked by grooves, and lobed knop at either end of the bar. The bar is slightly narrowed, and the pin is missing; iron staining to the bar indicates the use of iron for the pin. The frame has a D-shaped cross-section with the reverse being flat. The object has a pitted olive green patina. Length: 40.69mm; Width: 26.82mm; Thickness: 3.5mm; Weight: 7.44g See Whitehead (2003, 61; no. 360) for a similar buckle dated c. 1…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 21st August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-72148C

Record ID: BUC-72148C
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy double-loop buckle of medieval to post-Medieval date. The central axis bar divides the frame into two D-shaped sides. The majority of the buckle has a flat section, but the axis bar is of oval cross section and has attached iron corrosion from the otherwise missing pin.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 21st August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


  • Thumbnail image of BUC-721E78

Record ID: BUC-721E78
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A post-Medieval double-loop buckle which is largely made of copper alloy. The frame is of flat section and is sub-rectangular in plan, having rounded corners and inward-bowing top and bottom sides. Contained within opposing holes at the centre of the frame is the iron axis bar. This bar serves to attach a tongue-shaped copper-alloy plate and also the pin. There is ascallop-shaped pin rest at the centre of both the right- and left-hand ends of the frame.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 21st August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 369
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 401
  • Mean quantity: 1.087
  • Maximum: 11

Filter your search

1 - 20 of 369 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.