Record ID: NMS-6CE1C9
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Probable post-medieval lead possible weight, comprising a plano-convex ovoid cast classical female head. 31.5 x 25mm. 11mm thick. Weighs 43.08g, 665.0 grains.
Created on: Tuesday 9th December 2014
Last updated: Thursday 15th January 2015
Spatial data recorded.

Record ID: SF-6E9D02
Object type: WEIGHT
Broad period: UNKNOWN
County: Suffolk
Workflow stage: Awaiting validation
A complete cast lead object probably a weight or gaming piece of uncertain date. It is rectangular in form and section. All surfaces are undecorated. This object measures 22.85mm in length, 18.87mm in width, 6.65mm in thickness, 26.06g in weight. There are similar examples recorded on the PAS database (SF-EB7D11), (LON-6A4983), (NMS-7F64B5), (NMS-05E756). These all suggest a variety of dates, however a later date seems most likely, perhaps in the Medieval to Post-Medieval periods.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Yaxley', grid reference and parish protected.

Record ID: LVPL-716554
Object type: WEDGE
Broad period: ROMAN
County: Sefton
Workflow stage: Awaiting validation
A cast copper alloy tool, possibly a wedge or punch, of unknown date, possibly Roman or Medieval. The artefact is formed from a sub-rectangular bar, one end has been hammered to form a wedge, and this part is distorted. The worked edge has not been sharpened. There is no decoration present, however there are some diagonal file marks suggesting some form of finishing after casting. The worked edge measures 6.46mm in width and is 1.49mm thick. The bar is a light green colour, the patina has been cleaned by the finder using a wire brush and therefore cannot be used to gage the age of …
Created on: Tuesday 9th December 2014
Last updated: Wednesday 25th February 2015
Spatial data recorded. This findspot is known as 'Ince Blundell', grid reference and parish protected.

Record ID: BM-749729
Object type: VESSEL
Broad period: ROMAN
County: Darlington
Workflow stage: Published
A copper-alloy vessel mount, possibly from a large bowl similar to those of Eggers Type 96, 98, 99, 100, 102, 103 and 104 depicting a naked figure reclining under a tree, dating to the Roman period. The object is asymmetrical and teardrop shaped in plan. In section, it is approximately hemispherical in section. The underside of the mount is slightly convex and has a rough, scored surface, with traces of a white substance, possibly lead solder, attached to it. The mount is decorated with a cast figure, reclining right. The figure's right arm is resting behind his head, whilst the le…
Created on: Tuesday 9th December 2014
Last updated: Monday 29th July 2019
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-6C4C56
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of medieval or post-medieval copper alloy vessel rim, everted and thickened. Diameter not measurable, sherd 38 x 32mm. Weight 15.10g. Sooted. 14th-17th century
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: KENT-6C63C6
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
A post medieval pottery sherd (AD1500-1800) from a circular vessel. The sherd is a fine, hard, reddish orange coloured clay; dark brown glaze on both surfaces, only fragments of the glaze remaining on the outer surface There is a series of impressed indentations average length 24.6m (probably made by a thumb), 10.8mm below the outer edge of the rim. Below this the vessel wall thins to approx..8.61mm. The inner surface is smooth with the remaining glaze extant along the two flat contours of the upper rim. length:86.59mm, height:43.90mm, rim thickness:21.79mm, wall thickne…
Created on: Tuesday 9th December 2014
Last updated: Wednesday 1st April 2015
Spatial data recorded. This findspot is known as 'Wapping', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6C757E
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A body sherd from a Medieval coarse ware (MCW) vessel, c. 1100-1400 AD. This sherd measures 42.87mm in length, 27.78mm in width, 15.03mm in thickness, 16.95g in weight.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Yaxley', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6C81E4
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A body sherd from a Medieval coarse ware (MCW) vessel, c. 1000-1200 AD. This sherd measures 51.53mm in length, 37.34mm in width, 4.95mm in thickness, 10.65g in weight.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Yaxley', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6CD82C
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy vessel repair of Medieval to Post-Medieval date. Both sheets flat and sub-rectangular. Inserted through both sheets are two large copper-alloy rivets with flattened round heads. This object measures 34.52mm in length, 18.09mm in width, 2.03mm in thickness, 5.48mm in thickness (including the rivet), 8.13g in weight.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Yaxley', grid reference and parish protected.

Record ID: WMID-6DB11B
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
An incomplete cast copper alloy rim fragment from a possible cooking vessel, dating from the Late Medieval to Post Medieval Period (circa AD 1400 - AD 1700) . About 5% of the rim remains and the vessel would probably have measured 28 cm (280 mm) in diameter. The rim fragment is irregular in plan and triangular in cross section. The fragment is gently curved when viewed from above, with a concave internal face and a convex exterior. The internal face of the fragment has a thickened convex rim, with a ridge at the base of the rim. The rim on the external surface of the fragment c…
Created on: Tuesday 9th December 2014
Last updated: Thursday 18th December 2014
Spatial data recorded.

Record ID: KENT-6DE11B
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
A post medieval pottery sherd (AD1500-1800) from a vessel. The sherd is a fine, hard, reddish orange coloured clay, with no apparent glaze on either surface. The rim edge is triangular in section. There are two raised curls 30.3mm apart and 17.14mm below the outer edge, probably made by a thumb being impressed into the surface before firing. Below this the vessel wall thins to 6.9mm. length:64.44mm, height:65.39mm, rim thickness:21.32mm, wall thickness:6.9mm, weight:77.89g
Created on: Tuesday 9th December 2014
Last updated: Wednesday 1st April 2015
Spatial data recorded. This findspot is known as 'Wapping', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-6DF963
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of a very large medieval or post-medieval copper alloy vessel leg, scrap of five-ribbed triangular-sectioned leg above a transverse rib and five-toed foot. Extant height 55mm. Width 45mm. Thickness 30mm. Weighs 236g. Sooted. 14th-17th century.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-6E165D
Object type: VESSEL
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of a large medieval or post-medieval copper alloy vessel leg, flattish sub-rectangular section with longitudinal median rib. Extant height 56mm. Width 40mm. Thickness 13mm. Weighs 126.35g. Sooted. 14th-17th century.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: KENT-6E23D9
Object type: VESSEL
Broad period: ROMAN
County: Greater London Authority
Workflow stage: Awaiting validation
A rim sherd from a wheel-made ceramic vessel dating to the Roman Period (AD43-410) Description: The sherd is from a necked jar with a bead rim with a flattened top. The neck is decorated with two incised lines 3.85mm apart at the top where it joins the rim. At the lower edge (13.2mm down) where the neck becomes the convex shoulder, are two parallel incised lined lines 3.85mm apart. There is another parallel incised line 19.95mm further down the shoulder as it becomes the body. The inner surface appears undecorated and lightly pitted. The fabric is hard with a smooth surface and d…
Created on: Tuesday 9th December 2014
Last updated: Wednesday 25th March 2020
Spatial data recorded. This findspot is known as 'Wapping', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6E59C3
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A body sherd fragment from a cast copper-alloy vessel of Medieval to Post Medieval date. It is flat and undecorated and probably formed part of a cooking vessel. It measures 18.12mm in length, 13.40mm in width, 1.05mm in thickness, 1.53g in weight.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Yaxley', grid reference and parish protected.

Record ID: BERK-6E7C57
Object type: VESSEL
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A small body sherd from a medieval ceramic vessel of unknown form. The sherd has an off-white fabric with frequent small grained inlcusions. The sherd is glazed in an olive green with a blackish stripe arranged vertically; within this stripe is a decorative device similar to a row of B's on top of one another, in an orangey slip. The glazing is limited to the external wall of the fabric. Probably a Brill-Boarstall highly decorative vessel of the mid-13th or 14th century AD.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: IOW-6F3F33
Object type: VESSEL
Broad period: MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
A Medieval to post-Medieval cast copper-alloy cooking vessel leg/foot (c. 1250-c. 1650). This foot is roughly trapezoidal in plan and 'D'-shaped in cross-section. The breaks at the top enclose a small portion of the inner face of the vessel. The base of the foot is rounded. The upper part is covered in consolidated soot and deposits of soot and the lower part is mid brown. The inner smooth face of the vessel is light green with patches of a dark green patina. Height: 52.0mm; width: 25.9mm; thickness: 21.6mm. Weight: 104.13g. Cast cooking vessels seem to have come int…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: WMID-703235
Object type: VESSEL
Broad period: MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
An incomplete copper alloy foot / leg from a copper alloy cooking vessel of Late Medieval to Early Post Medieval dating (AD 1400 - AD 1700). The vessel fragment is sub rectangular in shape and sub rectangular in cross section. It consists of a straight body, with an external central rib. The internal surface is smooth. At the top of the leg, an irregular surface is present, this would have adjoined to the base of the cauldron. Traces of a black patina cover all sides of the leg. The base of the foot is slightly abraded. It measures 93.9 mm in length, 35.3 mm wide and 17.6 mm thi…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: WMID-70503B
Object type: VESSEL
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy foot / leg from a copper alloy cooking vessel of Late Medieval to Early Post Medieval dating (AD 1400 - AD 1700). The vessel fragment is sub rectangular in shape and sub rectangular in cross section. It consists of a straight body. The internal surface is smooth. At the top of the leg, an irregular surface is present, this would have adjoined to the base of the cauldron. The base of a trapped air bubble during the casting process is located at the top. Traces of a black patina cover the base of the leg. The base of the foot is slightly abraded. It meas…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

• 

  Image not taken

Record ID: SF-706EBE
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A rim sherd from a cast copper-alloy cooking vessel of Medieval date. A short length of the flaring, thickened, rim survives, the remainder of the object now missing due to old breaks. Both faces are worn but have traces of sooting, particularly on the exterior. This fragment measures 20.48mm in length, 45.34mm in width, 5.12mm in thickness, and 14.29g in weight. This is a rim sherd from a cooking vessel of probable Medieval date, c.13th-15th centuries AD.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Framlingham', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-70ECDE
Object type: VESSEL
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A rim sherd from a cast copper-alloy vessel of later Medieval to Post-Medieval date. A short length of the rim survives, the remainder of the object now missing due to old breaks. The interior surface has a single transverse groove, but there are no other signs of decorative elements. This fragment measures 41.12mm in width, 8.85mm in length, 3.53mm in thickness, and 5.07g in weight. This is a rim sherd from a vessel of probable Medieval to Post-Medieval date, c.14th-17th centuries AD.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Framlingham', grid reference and parish protected.

Record ID: GLO-72424E
Object type: VESSEL
Broad period: ROMAN
County: South Gloucestershire
Workflow stage: Awaiting validation
Three Fragments of South East Dorset Black Burnished Ware, these are all rim sherds from two different vessels. Abundant angular quarts temper. Total weight 48.73
Created on: Tuesday 9th December 2014
Last updated: Wednesday 10th December 2014
Spatial data recorded. This findspot is known as 'Tytherington', grid reference and parish protected.

Record ID: GLO-726A8F
Object type: VESSEL
Broad period: ROMAN
County: South Gloucestershire
Workflow stage: Awaiting validation
Four Fragments of Severn Valley Ware, three rim sherds and one wall sherd from two vessels. Grog and micaceous tempering. Overall weight 40.4g
Created on: Tuesday 9th December 2014
Last updated: Wednesday 10th December 2014
Spatial data recorded. This findspot is known as 'Tytherington', grid reference and parish protected.

Record ID: GLO-7278F4
Object type: VESSEL
Broad period: ROMAN
County: South Gloucestershire
Workflow stage: Awaiting validation
Two fragments of Samain ware, these are a base ab a rim sherd possibly from the same vessel, both have an orangeish-red fabric and red slip. Overall weight 17.83 g
Created on: Tuesday 9th December 2014
Last updated: Wednesday 10th December 2014
Spatial data recorded. This findspot is known as 'Tytherington', grid reference and parish protected.

Record ID: HAMP-72B994
Object type: VESSEL
Broad period: UNKNOWN
County: West Sussex
Workflow stage: Awaiting validation
An incomplete unidentified object, very similar to BH-CA39C0. It comprises an incomplete copper-alloy ring, circular in cross-section (c.3mm diameter) and with a double moulded collar to one side from which extends a circular-section spigot, apparently tapering to a point. It measures 15.77mm in length, 15.27mm in max.width and 6.57mm in max.thickness (at the collar). It weighs 2.42g. Of BH-CA39C0 the authors write 'The form of this piece suggests it was probably a swivelling handle attachment, probably from a Roman metal vessel'.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Midhurst', grid reference and parish protected.

Record ID: CORN-77AFD7
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
Cast copper alloy rim fragment from a bowl or cooking vessel with an internally bevelled rim that is triangular in profile and flush with the upper edge of the vessel. The body of the vessel curves downwards slightly to suggest a reasonably deep straight-sided bowl or a deep straight-sided everted rim, as seen on cauldrons, and the curvature of the rim suggests a diameter of about 280 mm. The bevelled rim itself is 5 mm thick which then tapers to the body which is 3.6 mm thick. There are patches of burnt organic material on the exterior of the fragment, which suggests that the vessel …
Created on: Tuesday 9th December 2014
Last updated: Wednesday 10th December 2014
Spatial data recorded.

Record ID: SF-70527E
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy unidentified conical object of possible Roman date. Only the terminal? of the object survives, the remainder of the object is missing due to old breaks, now worn. The base is circular and expanded. It narrows to a circumferential groove waist 6.59mm in width before expanding to the now missing top of the object and terminating in old breaks. This object measures 24.40mm in diameter, 21.75mm in height, 52.97g in weight. It is possibly a crest-holder from a Roman legionary helmet ('Coolus' type) of the 1st century AD. If it is one of these similar hel…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Yaxley', grid reference and parish protected.

Record ID: SUR-7052D3
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A post medieval copper alloy object comprising a loop and shaft. The shaft ends in a wide circular collar below which is a pierced projection. The oval loop is decorated with cast knotwork or foliate shapes. The purpose of this object is uncertain but it may have functioned as a handle, perhaps for a drawer.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: SF-707FDB
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy unidentified object of uncertain date. It is sub-rectangular in form with rounded outer edges decorated with transverse grooves. Through the centre is a square shaft. At its base is a pair of undecorated slightly expanding curvilinear bars 2.45mm in thickness. These connect to a flat oval plate 17.96mm in length, 8.51mm in width, 3.14mm in thickness via a pair of separately cast circular copper-alloy rivets. This object measures 34.36mm in length, 11.60mm in width, 7.45mm in thickness, 8.76g in weight.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Yaxley', grid reference and parish protected.

Record ID: SUSS-75B584
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Published
Period: post-1714 AD Description: thin sheet silver object, badly damaged/ crumpled. On one side of what remains is an incised line along both long edges creating a border. Within this, on the same side, are further incised lines which could represent foliage. There also appears to be a partial maker's mark of 'M&' in the centre. The reverse appears plain. Dimensions: Length: 37.19mm; Width: 24.90mm; Weight: 0.9g Discussion: The style of lettering used for the maker's mark suggests a modern date.
Created on: Tuesday 9th December 2014
Last updated: Thursday 13th October 2016
Spatial data recorded.

Record ID: SF-6D0CD4
Object type: TWEEZERS
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete and slightly bent undecorated pair of copper-alloy tweezers of probable Roman or Early Medieval date. Only one arm survives, the remainder of the object is missing due to old breaks, now worn. It is flat and rectangular with a slightly expanded terminal that turns inwards at an angle of nearly 90 degrees. The top of the arm narrows to a rounded terminal with a central circular perforation. The front face of the top of the arm is decorated with transverse grooves. The back face is undecorated. This object measures 33.47mm in length, 7.95mm in width, 0.70mm in thickn…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Yaxley', grid reference and parish protected.

Record ID: NLM-72433D
Object type: TRANSVERSE ARROWHEAD
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation
Pale semi-translucent flint transverse arrowhead, as kindly identified by the finder. Small flake with long parallel flakes removed from the dorsal side and with a bulb on the ventral, the working of the two sides being at right angles. Short abrupt retouch, probably a single impact, has trimmed what is here taken as the cutting edge of the arrowhead. The projectile must have received nearly all its effect from the combined power of bow and weight of the arrow shaft behind this lightweight head. Suggested date: Late Neolithic, 2700-2350 BC. Length: 11.4mm, Width: 14.2mm, Thicknes…
Created on: Tuesday 9th December 2014
Last updated: Monday 15th March 2021
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.

Record ID: NLM-72883D
Object type: TRANSVERSE ARROWHEAD
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation
Pale grey flint with patches of cloudy patina possible transverse arrowhead, as kindly identified by the finder. Irregular flake with flakes removed from opposite directions on its dorsal side and with a low bulb on the ventral. A chip at one corner of the putative arrowhead may detract from what was already a fairly irregular form. Suggested date: Late Neolithic, 2700-2350 BC. Length: 22.8mm, Width: 26.5mm, Thickness: 2.4mm, Weight: 1.70gms.
Created on: Tuesday 9th December 2014
Last updated: Monday 15th March 2021
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.

Record ID: SUR-6DE2A9
Object type: TOY
Broad period: POST MEDIEVAL
County: Wokingham
Workflow stage: Awaiting validation
A large post medieval cast copper alloy toy cannon measuring 87.44mm. The chase tapers lightly and the muzzle is straight rather than flaring. There is a pair of prominent trunnions on the moulded reinforcement ring. The cascabel is rounded with prominent collars and ends in a substantial knob. The vent is presently plugged.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: SUR-6F894E
Object type: TOY
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A cast lead alloy toy cannon dating from c1700-c1850. The cannon has a prominent moulding seam which runs across the paired trunnions (one is now missing) and their reinforcing ring. The muzzle is slightly flared and has a collar set a short distance behind it. The cascabel is angular with a square section and the vent, which is filled with iron corrosion, is at the terminal set in line with the body of the cannon.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: BERK-6C667C
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A worn copper alloy farthing trade token of seventeenth century date, issued by Lawrence Short of Oxford, Oxfordshire between AD 1648-1672. Williamson's (Oxfordshire) no. 167.
Created on: Tuesday 9th December 2014
Last updated: Thursday 2nd June 2016
Spatial data recorded.

• 

  Image not taken

Record ID: SF-6DD67D
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A worn copper-alloy 17th century farthing trader's token of Thomas Knights from Saxmundham, Suffolk. As Williamson, 1966: p. 1097 no. 285. Obverse: []KNIG[], A shield with two chevrons. Reverse: *OF.SAX[], The initials T E K within an inner circle.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Framlingham', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6DF209
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A worn copper-alloy 17th century halfpenny trader's token of William Smith from Yoxford, Suffolk. Dated on the token to 1667 AD. As Williamson, 1966: p. 1105, no. 374. Obverse: *II*/WILL.SMITH/1667 (legend in three lines). Reverse: []FOR[]DRAPER, Illegible reverse type within an inner circle.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Framlingham', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6E0907
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A worn copper-alloy 17th century halfpenny token from Southwold, Suffolk, dated on the token to 1667 AD. As Williamson, 1966: p. 1098, no. 294. Obverse: THE.ARMES.OF.SOVTHWOVLD, A coronet with two sceptres in a saltire through it, dolphins above and below. Reverse: A ½ /FOR THE/POORES/ADVANTAGE/1667 (legend over five lines)
Created on: Tuesday 9th December 2014
Last updated: Wednesday 30th October 2019
Spatial data recorded. This findspot is known as 'Framlingham', grid reference and parish protected.

Record ID: WMID-6FDBBD
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
A complete, struck/hammered copper alloy Trade Token of the Post Medieval Period, dating from AD 1600 - AD 1700. The token is very worn and as a result the detail is difficult to make out. The edge of the token is ragged with pieces missing. The obverse of the token depicts a possible bell, due to wear and corrosion this is uncertain. The reverse of the token depicts a tun (barrel) on it's side in the field. The legends on both sides are illegible. Diameter: 17.2 mm Thickness: 0.9 mm Weight: 0.8 g
Created on: Tuesday 9th December 2014
Last updated: Thursday 18th December 2014
Spatial data recorded.

Record ID: WMID-706031
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A complete lead or lead alloy unifaced token of Late Medieval to Early Post Medieval dating (AD 1400 to AD 1800). The token is circular in shape. The obverse depicts a geometric design of what appears to be a six pointed star on top of a five pointed star, made up of raised lines. This is surrounded by a raised circular ridge border (Powell Type 9). The reverse is undecorated, but has a deep, horizontal gouge (scar) at the base. The token has a diameter of 24.7 mm and is 2.7 mm thick. It weighs 9.0 g. The token is a mid grey to light brown in colour with an even patina. Abras…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 24th May 2016
Spatial data recorded.

Record ID: YORYM-70D27C
Object type: TOKEN
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A mostly complete post medieval copper alloy trading token dating to the 17th century. A shield is just discernable on one side, but the token is very worn and nothing else is legible. It is black-brown in colour, with areas of green. It is particularly worn around the edges. It is circular and its diameter is 18.92mm, its thickness is 1.26mm and its weight is 1.45g. Trade tokens were issued as an alternate to coinage, when there was little low denomination coinage in circulation. They were issued by traders and business proprietors, and therefore rarely travel far from their place…
Created on: Tuesday 9th December 2014
Last updated: Friday 12th December 2014
Spatial data recorded.

Record ID: LVPL-714105
Object type: TOKEN
Broad period: MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A cast lead alloy probable token of Medieval to Post-Medieval date, circa AD 1200 - 1800. The object is sub-circular in plan and flat. The object is uniface, decorated on one face with a moulded long cross. The object has a dark grey patina possibly indicating a more recent date.
Created on: Tuesday 9th December 2014
Last updated: Wednesday 25th February 2015
Spatial data recorded. This findspot is known as 'Aughton', grid reference and parish protected.

Record ID: BUC-715DEA
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Published
A post-medieval copper-alloy 17th-century token farthing issued by John Rotherham of Barnet, Hertfordshire, dated 1655 (on token). Williamson (1967, 299) Hertfordshire no. 29 (probably). The token has a diameter of 16.57 mm, and weighs 0.83 g
Created on: Tuesday 9th December 2014
Last updated: Tuesday 3rd October 2017
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.

Record ID: BERK-71A94A
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A copper alloy halfpenny trade token dated AD 1669. The trade token was issued by Henry Munday, tallowchandler of Swindon, Wiltshire. Williamson (Wiltshire) no. 237.
Created on: Tuesday 9th December 2014
Last updated: Thursday 2nd June 2016
Spatial data recorded.

Record ID: WMID-71AC42
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
A complete lead or lead alloy token of the Medieval to Post Medieval period (AD 1400 - AD 1800). The obverse depicts five raised lines with are separating the circle into five segments (Powell Type 3). The reverse is undecorated. The casting sprue is still present as a sub rectangular knop at the top of the token. The token has a diameter of 24.3 mm (including the casting knop and 20.4 mm without the casting knop). It has a thickness of 3.1 mm. It weighs 7.1 g. The token is a mid grey in colour with an even patina. Abrasion caused by movement whilst within the plough soil has re…
Created on: Tuesday 9th December 2014
Last updated: Thursday 18th December 2014
Spatial data recorded.

Record ID: BERK-7258B2
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A worn copper alloy post-medieval token, formed from a halfpenny of George II (AD 1727-1760). The coin has been clipped to form a serrated edge around its circumference, and nearly all detail has been removed or worn away - one can just make out the left facing bust of George II. On the reverse of the coin the initials W K have been incised. Tokens were a common occurance from the 17th century, some lead tokens being crudely made while other copper alloy tokens were manufactured to much higher standards. There are a couple of examples of other tokens with serrated edges (see SUSS-72B7…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: SOM-6E0640
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval copper-alloy trade token farthing issued by John Liddon of Uplyme, Devon, dated 1667 (on token). Williamson Devon 366. Williamson (1967, 162) 
Created on: Tuesday 9th December 2014
Last updated: Tuesday 17th January 2023
Spatial data recorded. This findspot is known as 'Chedzoy CP', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6FE9A9
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete but bent copper-alloy domed type thimble of Post-Medieval date. The rim is unthickened and has a circumferential groove. The straight sides are covered with extensive circular indentations that spiral from the crown to the base of the thimble. This thimble measures 11.50mm in height, 15.86mm in diameter, 0.81mm in thickness, 1.27g in weight. There are similar examples from London (Egan, 2005, p. 132, no. 621).
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Yaxley', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-70088B
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete but bent copper-alloy domed type thimble of Post-Medieval date. The rim is unthickened and has a circumferential groove. The straight sides are covered with extensive circular indentations that spiral from the flat crown to the base of the thimble. This thimble measures 17.21mm in height, 18.68mm in diameter, 0.68mm in thickness, 2.88g in weight. There are similar examples from London (Egan, 2005, p. 132, no. 623).
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Palgrave', grid reference and parish protected.

Record ID: NLM-718F9B
Object type: TESSERA
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
Grey Limestone possible tessera. Irregular stone cube whose faces were possibly defined by drafts of an axe or chisel, and subsequently chipped. The smoothest side may have formed part of a mosaic floor. The use of larger tesserae would be more likely in the later Roman period, as part of an undecorated floor, a simple geometric design, or in the border to a figurative design. Suggested date: possibly Late Roman, 200-375. Length: 28.4mm, Width: 20.9mm, Thickness: 22.6mm, Weight: 27.28gms.
Created on: Tuesday 9th December 2014
Last updated: Monday 15th March 2021
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.

Record ID: SUR-709380
Object type: TAP
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A cast copper alloy tapering cylinder measuring 68.29mm in length. Near the wider end is a goup of three cast and rounded chevrons. Within the chevron group is a small circular countersunk hole. Remains of a white metal coating survive on the surface. The purpose of this object is unclear. It has the appearance of the spigot for a barrel tap but the lack of any grip to prevent the spigot turning in the wood argues against this interpretation.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-70235D
Object type: SWORD BELT
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of post-medieval copper alloy sword belt hanger, loop from plate containing hook with terminal knop from pendent plate. Cf. Read 2001, no. 373 and Read 2008, no. 793. Extant combined length 18.5mm. Mid 16th - 17th century.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 22nd September 2015
Spatial data recorded.

Record ID: BERK-6D97FA
Object type: STUD FASTENER
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A complete but slightly distorted silver stud fastener, possibly a cuff link or button of Post-Medieval date. The object consists of two sheet plates of silver joined together at the centre of each reverse by an integral shank. The reverse plate is circular and has a maker's mark, possibly [.]R within an oval cartouche. The front plate is octagonal in plan and is slightly smaller than the reverse plate. It is convex at the front and concave at the rear. At the centre is a poorly executed incised flower motif which has four main petals. The style of the flower motif is similar to thos…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

• 

  Image not taken

Record ID: SF-73471C
Object type: STUD
Broad period: UNKNOWN
County: Suffolk
Workflow stage: Awaiting validation
A cast copper-alloy stud or rivet of uncertain Roman or later date. It has a dome-shaped head that has flat back and rounded front face, which is slightly faceted around its edges. At the centre of the back face is an integral shaft that is square in section and tapers to a sharp point. The entire object has a dark brown patina with some pitting in places. It measures 11.98mm in diameter, 12.67mm in height, and 1.70g in weight.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Framlingham', grid reference and parish protected.

Record ID: BERK-6E0F85
Object type: STRAP FITTING
Broad period: IRON AGE
County: Oxfordshire
Workflow stage: Published
An incomplete cast copper alloy late Iron Age to early Roman strap union of Taylor and Brailsford's (1985:247) Type 1.2. The strap union is formed of two circular conjoined openwork elements arranged like a figure of eight. They are flat on the underside and domed on top. There is the remains of the strap bars eminating from the centre of each side of the figure of eight, with one strap bar surviving to a length of 9.1mm. These studs would have formed a U-shaped on either side, through which a strap could be fed and secured.Several examples are illustrated in Taylor and Brailsford (19…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 3rd March 2015
Spatial data recorded.

Record ID: SOM-6E7CDB
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post-medieval cast copper-alloy hooked mount. The mount consists of a plate, trapezoidal in plan, with an integral backward-turning hook. The plate has a slightly concave back and a convex front. It is narrowest at the hook and widens to a rounded bilobed end. There is a slight widened collar between the main plate and the hook. There are two rivet holes aligned down the centre of the plate. The holes are filled with iron corrosion product. The rectangular cross-sectioned hook is bent back until the tip meets the back of the plate. A copper-alloy ring is retained by from the hook. The…
Created on: Tuesday 9th December 2014
Last updated: Friday 12th December 2014
Spatial data recorded. This findspot is known as 'Chedzoy CP', grid reference and parish protected.

Record ID: SWYOR-6EB139
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A cast copper alloy strap fitting of post-Medieval date, AD 1550 - 1750. It is in two linked sections, a strap fitting and an S shaped hook in the form of a double headed snake. The strap fitting has a circular body with a sub-rectangular strap loop and, opposite the strap loop, an integral suspension loop at right angles to the plane of the body. The S shaped hook is fitted through this suspension loop. It has the head of a snake at each end and a broad, circular collar in the centre. The strap fitting is 61mm long and 22mm wide. It weighs 10.4gm. Similar fittings can be found on …
Created on: Tuesday 9th December 2014
Last updated: Saturday 23rd November 2019
Spatial data recorded.

Record ID: WMID-7156D6
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
A complete copper alloy Strap Fitting or Mount of the Medieval period (AD 1300 - AD 1400). The fitting is irregular in plan and sub rectangular in cross section. It is slightly concave on the reverse side. The irregular plan consists of a quatrefoil with sub triangular knops in each tressure (corner). It is usually known as a Heraldic Style Mount. The decoration on the obverse has been worn away. The reverse of the object has two triangular protrusions that are rectangular in cross section. These have been bent towards the plate to form two semi circles, where it would have attache…
Created on: Tuesday 9th December 2014
Last updated: Thursday 18th December 2014
Spatial data recorded.

Record ID: WILT-71971C
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A copper alloy medieval strap slide dating to the period c. AD 1300 - 1400. The strap slide consists of a rectangular frame with one side expanded out into a six-sided lenticular shape. This slide is slightly convex and has an incised groove running around the edge of create a border. There are incised parallel lines visible on several of the surfaces of the strap slide which may be tool marks. The object has a dark green shiny patina. The strap slide measures 24.84mm in length, 9.81mm maximum width, 3.32mm minimum width and weighs 5.73g.
Created on: Tuesday 9th December 2014
Last updated: Friday 12th December 2014
Spatial data recorded.

Record ID: NMS-6D57AD
Object type: STRAP END
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation
Incomplete Roman copper alloy probable strap-end or pendant, D-sectioned, outer part missing. The sides curl inward and conjoin before continuing as separate points. A rectangular loop springs from the curled sides formed from two short, broad sides with groove at the junction with the straight bar. This object resembles a 2nd to 3rd-century military buckle such as shown in James 2004, nos. 72-3 or Oldenstein 1976, Kat. Nr. 1011-14, but lacks a pin bar. It is perhaps more likely to have been a strap-end or pendant, such as an ornate strap-end illustrated in Appels and Laycock 2007, 96…
Created on: Tuesday 9th December 2014
Last updated: Thursday 15th January 2015
Spatial data recorded.

• 

  Image not taken

Record ID: SF-714AC5
Object type: STRAP END
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy rectangular two piece strap end of Medieval date. Only one plate survives, the remainder of the object is missing due to old breaks, now worn. It is flat with a rounded terminal. At the attachment end are two V-shaped notches and two circular rivets holes. Both faces are undecorated. This strap end measures 43.48mm in length, 17.81mm in width, 0.90mm in thickness, 2.97g in weight. There is a similar example from London (Egan and Pritchard, 1991, p. 133, no. 609).
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Yaxley', grid reference and parish protected.

Record ID: SUR-72A237
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A copper alloy early medieval strap end. The strap end is pointed and the bifurcating attachment end is largely missing. The zoomorphic head is debased; the ears are behind the head and are formed from four C shapes. The body is decorated with a single panel which is infilled with a grid arranged diagonally.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: SUR-72C09D
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A copper alloy early medieval strap end dating to the 9th century. The strap end has a debased head with the ears behind; the neck is slightly waisted. On the curving body is a six-sided panel which contains a sinuous interlacing beast whose tale ends in a scroll and whose head looks forward to the left, the mouth agape. A leg and foot can be seen adjacent to the lower part of the frame. The decoration has been inalid with what appears to have been niello, though now rather degraded. The bifurcated attachment end is a little broken.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 4th August 2015
Spatial data recorded.

• 

  Image not taken

Record ID: SF-6E83BF
Object type: STRAINER
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy circular strainer of Medieval date. Only part of the plate survives, the remainder of the object is missing due to old breaks, now worn. It is flat with multiple punched circular perforations before terminating in old breaks. This strainer measures 23.56mm in length, 12.06mm in width, 1.04mm in thickness, 0.82g in weight. There is a similar example from London (Egan, 1998, p. 158, no. 440) and recorded on the PAS database (SF-682A7D).
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Yaxley', grid reference and parish protected.

Record ID: SF-732B7E
Object type: STRAINER
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete sheet copper-alloy handle attachment from a strainer or skimmer of probable late-Medieval to early Post-Medieval date. The base of the handle attachment and a small fragment of the skimmer itself survive, the remainder now missing due to old breaks. It has a flat, rectangular back plate that tapers to a rounded base. On the back face of this plate is a second rectangular plate of equal dimensions and form, but which projects at its centre to form a rectangular socket that runs the length of the plates and would have enabled attachment of a handle. The two plates are held…
Created on: Tuesday 9th December 2014
Last updated: Wednesday 10th December 2014
Spatial data recorded. This findspot is known as 'Framlingham', grid reference and parish protected.

Record ID: NMS-6FF48D
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Late Saxon copper alloy stirrup-strap mount, Williams Class A, Type 1. Sub-triangular or pentagonal, with twin rivet-holes above remains of flange on reverse, two rounded knops on either side, with two more flanking the rounded apex loop, the perforation containing the corroded remains of an iron rivet. Worn and corroded remains of engraved decoration depicting two addorsed beasts. Height 49mm. Width 30.5mm. 3.5mm thick. Weighs 24.55g. 11th century.
Created on: Tuesday 9th December 2014
Last updated: Thursday 15th January 2015
Spatial data recorded.

Record ID: LON-6D2F66
Object type: SPOON
Broad period: POST MEDIEVAL
Workflow stage: Awaiting validation
A post medieval lead alloy spoon dating AD 1550-1700. The spoon has a fig-shape bowl, hexagonal stem and a slip top (pinched terminus). There is no trace of an internal iron strengthening rod. There is a maker's mark located on the spoon bowl directly below the handle. There is significant damage to the spoon bowl with cracks on both sides and part of the top missing. The central maker's mark depicts a goblet within a beaded border. Parallels for this spoon can be found in Egan (2005, no. 571 and 573) which date to the late 16th century. A further parallel on the PAS database date…
Created on: Tuesday 9th December 2014
Last updated: Monday 5th January 2015
No spatial data available.

Record ID: SUR-6DA055
Object type: SPOON
Broad period: POST MEDIEVAL
County: West Berkshire
Workflow stage: Awaiting validation
Fragments of a small cast copper alloy spoon of 'Apostle' type and of the 18th or 19th century. Only a fragment of the bowl survives and this has a cast octafoil on the back. The handle terminal is formed by a standing figure of an apostle.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: SF-6DD3E4
Object type: SPOON
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete and bent copper-alloy spoon of Roman date. It is missing the majority of the bowl due to old breaks, now worn. The handle is a flattened D-shape in section with a flat back and rounded front face. It is undecorated and tapers to a point. The bowl is integrally cast and sub-circular before terminating in old breaks. This spoon measures 57.15mm in length, 15.32mm in width at the bowl, 3.93mm in width at the handle, 2.04mm in thickness, 2.85g in weight. There are similar examples from Colchester (Crummy, 1983, p. 70, no. 2008, 2014).
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Yaxley', grid reference and parish protected.

Record ID: LON-6E54FA
Object type: SPOON
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
A post medieval lead alloy spoon, dating late 16th-early 17th century. The spoon has a circular bowl with a hexagonal stem that ends in a stump (flat) end. The object has a light-mid grey patination across the surface, with patches of golden colouration on the back of the bowl. The golden patches are the result of tin sulphide discoloration from the Thames, also known as "nature's gilding". There is a maker's mark near the upper edge of the bowl at the junction with the handle. The maker's mark comprises a crowned rose which suggests a Dutch origin. See LON-90B977. A similar style …
Created on: Tuesday 9th December 2014
Last updated: Thursday 11th December 2014
Spatial data recorded.

Record ID: NMGW-726CCD
Object type: SPOON
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Post medieval copper alloy and silver spoon terminal of 18th century date The spoon was of 'apostle' form and is fragmentary (with a surviving length of 34.8mm and a weight of 5.8g) and comprises a copper alloy terminal surmounted on a silver handle. The terminal is heavily-corroded and appears to depict a standing figure (25.5mm long,9.0mm wide and 5.4mm thick) seemingly cloaked and with the right arm bent to the chest and may possibly have depicted the Virgin with Child. The figure is standing on a circular pedestal at the base (7.9mm diameter). The silver spoon handle is circu…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: BM-75628C
Object type: SPOON
Broad period: ROMAN
County: Darlington
Workflow stage: Awaiting validation
A cast copper-alloy Roman multifunctional eating utensil, dating to the second or third century AD. The handle is in the form of an elongated, crouching feline, probably a lion or panther, with front legs outstretched. The legs are set forward of and below the animal's head which has moulded ears, slight recesses for eyes and a groove showing the mouth. The elongated body behind is U-shaped in cross-section, the underside being recessed. Just over halfway along the animal is a slight bulge representing the creature's hind quarters and legs. The handles continues, terminating in a cres…
Created on: Tuesday 9th December 2014
Last updated: Thursday 3rd May 2018
Spatial data recorded.

Record ID: YORYM-70457D
Object type: SPINDLE WHORL
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A complete medieval to post-medieval cast lead spindle whorl with decoration on both sides consisting on one side of lines radiating from the centre outwards, and 3 pellets in between each line arranged in a triangle. The other side consists of a pattern of radiating lines from the centre outwards with a dot in each section and a cross. There is a circular perforation in the centre which measures 15.58mm. It is circular in plan and bi-conical in profile, with a wide rim around the circumference. It is slightly worn and the metal is cream in colour and dark brown in between the pattern…
Created on: Tuesday 9th December 2014
Last updated: Friday 12th December 2014
Spatial data recorded.

Record ID: SWYOR-70F083
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: North Yorkshire
Workflow stage: Awaiting validation
A cast lead spindle whorl of uncertain date, probably dating from the sixth to sixteenth century, AD 600 - 1600. It is of Coppergate type 1, having a circular, flat base and a domed upper surface. There is a central, circular perforation but no decoration. It is 27.8mm in diameter and 12.3mm high. It weighs 37.6gm. Whorls of this shape are illustrated in Rogers, P. W. 2007, Cloth and Clothing in Early Anglo Saxon England, page 25.
Created on: Tuesday 9th December 2014
Last updated: Thursday 27th January 2022
Spatial data recorded.

Record ID: WMID-6D041B
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy socketed axehead, of possible Late Bronze Age dating (1000 BC to 800 BC). Probably less than 40% of the socketed axehead is present, consisting of part of the main body, the base of the socket and the blade edge. The fragment is sub rectangular in plan, and triangular in section. The socket is sub-rectangular in shape. Casting ridges are present along one of the sides. The blade edge is rounded and expands out at one side, forming a sharp curve (or hook), the other side shows signs of damage. The blade shows signs of breakage and damage. The cutting …
Created on: Tuesday 9th December 2014
Last updated: Thursday 18th December 2014
Spatial data recorded.

Record ID: LVPL-719FB3
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Published
An almost complete cast copper alloy socketed axe of Late Bronze Age date (1000 - 800 BC). The object can be classified as the Ewart Park phase of metalwork. The object is sub-rectangular in plan with the cutting edge expanding outwards to form a convex cutting edge. The cutting edge is damaged and worn which occurred both in recent and ancient times. The cutting edge measures 53.47mm in width and is 3.29mm thick. The socket has a sub square mouth (internal width 25.47mm, internal length 33.06mm, external width 37.09mm, external length 44.26mm and the wall of the mouth is 5-6mm …
Created on: Tuesday 9th December 2014
Last updated: Tuesday 24th February 2015
Spatial data recorded. This findspot is known as 'Aughton', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-6C731B
Object type: SIEVE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of medieval or post-medieval copper alloy sieve, skimmer or colander, sub-rectangular with two original straight edges set at a right angle, the other sides boken across at least eight of the 15 circular perforations punched through from one direction. Extant dimensions 32 x 30mm. Thickness 1mm. 14th - 17th century.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: BM-751115
Object type: SHOE
Broad period: ROMAN
County: Darlington
Workflow stage: Awaiting validation
An incomplete cowhide shoe, possibly a military boot dating to the late second or early third century AD. The shoe has been designed to be worn on the left foot. The shoe is swayed and very pointed. The toe turns noticeably inward. The toe is very pointed and tapers to the tread of the foot. The waist and seat are almost straight, with little variation in width. A single line of studs runs around the outer edge of the shoe, with four straight lines in the tread down to the waist. There is a single line in the waist towards the outer edge, but otherwise the waist is open and free of st…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th October 2018
Spatial data recorded.

Record ID: WILT-72BF24
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A copper alloy medieval seal matrix dating to the period c. AD 1250 - 1300. The seal matrix is a pointed oval shape and features a D-shaped integral pierced lug on the reverse. There is a longitudinal ridge extending from the bottom of the pierced loop to the tip of the seal matrix on the reverse. The matrix depicts a pelican in her piety, the pelican piercing its own breast to feed its chicks in a nest below, the nest resting in the upper branches of a larger branch. Surrounding the central motif is the legend [...] DEVM TIM ET The pelican in her piety is a motif known to be a sym…
Created on: Tuesday 9th December 2014
Last updated: Wednesday 14th October 2015
Spatial data recorded.

Record ID: SUR-6FE01E
Object type: SEAL
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A cast lead seal of Russian origin and once attached to hemp or flax. The inspector's name is Verevkin. The seal bears the date 1799.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: KENT-6CDEAC
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation
A knapped flint end scraper of probable Neolithic or Early Bronze Age date (c. 4000-1000 BC). The flint is a secondary or tertiary flake and is dark brown and dark grey in colour; cortex is reforming on all surfaces. Two edges have been shaped with short, sub-parallel, abrupt retouch. The scraper is 24.8 mm in length, 29.5 mm wide, 7.0 mm thick and weighs 7.4 g.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 6th January 2015
Spatial data recorded.

Record ID: KENT-6D0268
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation
A knapped flint scraper of probable Neolithic or Early Bronze Age date (c. 4000-1000 BC). The flint is a tertiary flake and is grey with mottled brown areas. The rounded distal end and both sides have been shaped with short, scaled, semi-abrupt retouch. The scraper is 28.0 mm in length, 19.4 mm wide, 7.5 mm thick and weighs 3.4 g.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 6th January 2015
Spatial data recorded.

Record ID: KENT-6D1C23
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation
A knapped flint thumb-nail scraper of probable Neolithic or Early Bronze Age date (c. 4000-1000 BC). The flint is a secondary flake and is dark and light brown in colour. The rounded distal end and a portion of one side have been shaped with short and invasive, scaled, semi-abrupt retouch. The scraper is 39.2 mm in length, 27.5 mm wide, 13.8 mm thick and weighs 19.1 g.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 6th January 2015
Spatial data recorded.

Record ID: KENT-6D522D
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation
A knapped flint thumb-nail scraper of probable Neolithic or Early Bronze Age date (c. 4000-1000 BC). The flint is a secondary flake and is dark brown and black in colour. The distal end and one side have been shaped with short, sub-parallel, semi-abrupt and abrupt retouch. The scraper is 29.9 mm in length, 22.0 mm wide, 9.1 mm thick and weighs 6.0 g.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 6th January 2015
Spatial data recorded.

Record ID: KENT-6D6A16
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation
A knapped flint rounded scraper of probable Neolithic or Early Bronze Age date (c. 4000-1000 BC). The flint is a primary flake and is brown and grey in colour; the dorsal face is covered with cortex. One end and a portion of one side have been shaped with long, scaled and sub-parallel, semi-abrupt and abrupt retouch. The scraper is 45.2 mm in length, 25.7 mm wide, 12.1 mm thick and weighs 18.4 g.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 6th January 2015
Spatial data recorded.

Record ID: KENT-6D9A74
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation
A knapped flint rounded scraper of probable Neolithic or Early Bronze Age date (c. 4000-1000 BC). The flint is a primary flake and is dark brown in colour; the dorsal face is almost entirely covered with cortex. The distal end and both sides have been shaped with short, scaled, semi-abrupt and crossed abrupt retouch. The scraper is 70.7 mm in length, 39.3 mm wide, 16.6 mm thick and weighs 46.8 g.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 6th January 2015
Spatial data recorded.

Record ID: KENT-6E0552
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation
A knapped flint scraper of probable Neolithic or Early Bronze Age date (c. 4000-1000 BC). The flint is a tertiary flake and is dark brown in colour. One side has been shaped with short, scaled, crossed abrupt retouch. The scraper is 27.0 mm in length, 31.2 mm wide, 12.3 mm thick and weighs 10.2 g.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 6th January 2015
Spatial data recorded.

Record ID: KENT-6E83BA
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation
A knapped flint rounded scraper of probable Neolithic or Early Bronze Age date (c. 4000-1000 BC). The flint is a primary flake and is black in colour; the dorsal face is covered with cream-orange cortex. The sides have been shaped with short, scaled, semi-abrupt and abrupt retouch. The scraper is 18.2 mm in length, 27.5 mm wide, 10.3 mm thick and weighs 5.8 g.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 6th January 2015
Spatial data recorded.

Record ID: KENT-6EA1D7
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation
A knapped flint end scraper of probable Neolithic or Early Bronze Age date (c. 4000-1000 BC). The flint is a tertiary flake and is covered with white and light grey patina with visible areas of brown flint. One side and dorsal end have been shaped with short, scaled, semi-abrupt and crossed abrupt retouch. The scraper is 34.3 mm in length, 19.9 mm wide, 6.7 mm thick and weighs 5.4 g.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 6th January 2015
Spatial data recorded.

Record ID: BERK-6EEB1E
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Buckinghamshire
Workflow stage: Awaiting validation
A flint scraper dating to the Neolithic period, c. 4000-2350 BC. The scraper has been made on a flake and could be described as a 'thumbnail' scraper due to its size. There is no bulb or platform retained. Invasive soft-hammer retouch is visible around both laterals and the distal end, however there is none on the proximal end. All retouching is limited to the dorsal surface. The scraper has been burnt, after it was formed. There are two 'pot-lids', or spools that fracture and pop off under extreme conditons, such as heating or freezing. These pot lids break through the patina of the …
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: KENT-6FFB7D
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation
A knapped flint end scraper of probable Neolithic or Early Bronze Age date (c. 4000-1000 BC). The flint is a secondary flake and is dark brown in colour with an area of cortex on the dorsal face. Both sides have been shaped with short, scaled, abrupt retouch. The scraper is 47.2 mm in length, 23.0 mm wide, 10.6 mm thick and weighs 11.4 g.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 6th January 2015
Spatial data recorded.

Record ID: KENT-700A79
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Kent
Workflow stage: Awaiting validation
A knapped flint end scraper of probable Neolithic or Early Bronze Age date (c. 4000-1000 BC). The flint is a primary flake and is dark grey in colour with cortex covering the dorsal face. Both sides have been shaped with long, scaled, semi-abrupt retouch. The scraper is 35.1 mm in length, 24.5 mm wide, 10.5 mm thick and weighs 13.2 g.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 6th January 2015
Spatial data recorded.

Record ID: YORYM-707324
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: North Yorkshire
Workflow stage: Awaiting validation
A complete knapped lithic implement of Neolithic date. The implement is a scraper formed from a secondary flake which is ovate in both plan and section. The ventral surface is smooth with a prominent bulb of percussion and the striking platform still remains. Numerous irregular flakes have been removed from the dorsal surface and short, abrupt, stepped retouch is present along the edges. The flint is a dark grey colour. The implement is 22.5mm long, 20.5mm wide, 9.3mm thick and weighs 4.9g.
Created on: Tuesday 9th December 2014
Last updated: Friday 12th December 2014
Spatial data recorded.

Record ID: NLM-71CF0B
Object type: SCRAPER (TOOL)
Broad period: BRONZE AGE
County: Lincolnshire
Workflow stage: Awaiting validation
Dark grey flint with slight cloudy patina patches and with cortex scraper. Tiny thumbnail scraper with short abrupt retouch trimming cortex from the dorsal side and with light rippling on the ventral. The good condition and survival of a sharp spur of projecting flint may suggest this object to have been incorporated and remained in a sealed deposit until relatively shortly before its discovery. Suggested date: Early Bronze Age, 2350-1600 BC. Length: 17.3mm, Width: 18.9mm, Thickness: 4.1mm, Weight: 1.55gms.
Created on: Tuesday 9th December 2014
Last updated: Monday 15th March 2021
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.

Record ID: NLM-71FABB
Object type: SCRAPER (TOOL)
Broad period: BRONZE AGE
County: Lincolnshire
Workflow stage: Awaiting validation
Dark brown flint of good quality scraper. Flake with broad flakes removed from its dorsal side and with a prominent bulb on the ventral. Invasive retouch, some directed from the edges inwards and executed from the dorsal aspect, appears to have been followed by grinding or battering of parts of the edge, which is probably not fortuitous damage given the good condition of most of the surface. Suggested date: Early Bronze Age, 2350-1600 BC. Length: 36.6mm, Width: 27.7mm, Thickness: 9.5mm, Weight: 10.46gms.
Created on: Tuesday 9th December 2014
Last updated: Monday 15th March 2021
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.

Record ID: NLM-72084A
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation
Dark grey flint of good quality, with extensive white patina, scraper. Oval flake with broad and narrow flakes removed from its dorsal side and rippled on the ventral. Short abrupt retouch of a protruding lobe has removed milky white patina, revealing the darker tint of flint beneath. This must have followed a long period during which the flake was exposed to weathering, and may imply that the struck flake was then recognised as of further value. However, both episodes could be accommodated by a Neolithic date. Suggested date: Neolithic, 4000-2350 BC. Length: 36.5mm, Width: 34.5m…
Created on: Tuesday 9th December 2014
Last updated: Monday 15th March 2021
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.

Record ID: NLM-7213FB
Object type: SCRAPER (TOOL)
Broad period: BRONZE AGE
County: Lincolnshire
Workflow stage: Awaiting validation
Grey flint with cortex scraper. Irregular flake trimmed and detached by hard hammer strike and with very short abrupt retouch and battering along a slightly concave edge executed from the dorsal aspect, probably to produce a hollow scraper. Suggested date: Bronze Age, 2350-800 BC. Length: 38.8mm, Width: 20mm, Thickness: 11.5mm, Weight: 7.16gms.
Created on: Tuesday 9th December 2014
Last updated: Monday 15th March 2021
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.

Record ID: NLM-722BE2
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation
Opaque pale grey flint with cortex scraper. A flake of wavy profile with parallel flakes removed from the dorsal side in the course of cortex trimming, and with short abrupt retouch executed from the dorsal aspect along its curved edge. The smooth ventral surface, which is reminiscent of a negative hinge fracture, facilitates a grip between finger and thumb. Suggested date: Early Neolithic, 4000-3500 BC. Length: 27.7mm, Width: 23.2mm, Thickness: 6.4mm, Weight: 4.34gms.
Created on: Tuesday 9th December 2014
Last updated: Monday 15th March 2021
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.

Record ID: NLM-72219C
Object type: SCRAPER (TOOL)
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation
Pale grey flint with patches of cloudy patina scraper. Flake with broad flakes removed from its ventral side and with a bulb on the ventral. Short abrupt pressure flaked retouch removes the thin patina accumulated over a flake struck at some time before this reworking. The lack of patina on retouch may suggest the reworked object was then incorporated into a sealed context. Both episodes could be accommodated by a Neolithic date. Suggested date: Neolithic, 4000-2350 BC. Length: 35.3mm, Width: 17mm, Thickness: 10.6mm, Weight: 5.47gms.
Created on: Tuesday 9th December 2014
Last updated: Monday 15th March 2021
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.