Record ID: CORN-77AFD7
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
Cast copper alloy rim fragment from a bowl or cooking vessel with an internally bevelled rim that is triangular in profile and flush with the upper edge of the vessel. The body of the vessel curves downwards slightly to suggest a reasonably deep straight-sided bowl or a deep straight-sided everted rim, as seen on cauldrons, and the curvature of the rim suggests a diameter of about 280 mm. The bevelled rim itself is 5 mm thick which then tapers to the body which is 3.6 mm thick. There are patches of burnt organic material on the exterior of the fragment, which suggests that the vessel …
Created on: Tuesday 9th December 2014
Last updated: Wednesday 10th December 2014
Spatial data recorded.

• 

  Image not taken

Record ID: SF-733A7E
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete cast copper-alloy double looped buckle frame of Post-Medieval date. One loop is mostly incomplete and the pin is missing due to old breaks. The surviving loop is oval in form and section, with an oval sectioned bar that has slight notches at each end separating the two frames. It measures 16.20mm in width, 14.45mm in length, 2.93mm in thickness, and 1.78g in weight. This buckle is of Post-Medieval date, c.16th-17th centuries AD.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Framlingham', grid reference and parish protected.

Record ID: SF-732B7E
Object type: STRAINER
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete sheet copper-alloy handle attachment from a strainer or skimmer of probable late-Medieval to early Post-Medieval date. The base of the handle attachment and a small fragment of the skimmer itself survive, the remainder now missing due to old breaks. It has a flat, rectangular back plate that tapers to a rounded base. On the back face of this plate is a second rectangular plate of equal dimensions and form, but which projects at its centre to form a rectangular socket that runs the length of the plates and would have enabled attachment of a handle. The two plates are held…
Created on: Tuesday 9th December 2014
Last updated: Wednesday 10th December 2014
Spatial data recorded. This findspot is known as 'Framlingham', grid reference and parish protected.

• 

  Image not taken

Record ID: NMS-7297AA
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Broken fragment of a copper alloy jetton, Nuremberg Ship penny type with fleurs in lozenge on reverse type, further details illegible, c.1500-84
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-72893A
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy jetton of Hans Schultes III, Turbaned bust type, Mitchiner 1416 (same dies), 1608-12
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-727A03
Object type: JETTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Copper alloy jetton of Hans Schultes, Lion of St. Mark type, Mitchiner 1330 (same dies), 1553-84
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: HAMP-727798
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
An incomplete Early Post-Medieval (1500-1700) hooked tag, consisting of an incomplete openwork plate and a rectangular loop. The hook is missing. It measures 17.19mm in incomplete length, 14.96mm in width, 1.67mm in max.thickness and weighs 1.19g. Flanking the rectangular loop (internal measurement 11.21x3.16mm) is a wide (7mm), concave cross-sectioned groove. Beyond this is openwork decoration with a circular hole at each corner and below and between a trefoil. The edges of this has worn breaks. The broad transverse groove is comparable to several in Read (2008). See for example ff…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded. This findspot is known as 'Midhurst', grid reference and parish protected.

Record ID: NMGW-726CCD
Object type: SPOON
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Post medieval copper alloy and silver spoon terminal of 18th century date The spoon was of 'apostle' form and is fragmentary (with a surviving length of 34.8mm and a weight of 5.8g) and comprises a copper alloy terminal surmounted on a silver handle. The terminal is heavily-corroded and appears to depict a standing figure (25.5mm long,9.0mm wide and 5.4mm thick) seemingly cloaked and with the right arm bent to the chest and may possibly have depicted the Virgin with Child. The figure is standing on a circular pedestal at the base (7.9mm diameter). The silver spoon handle is circu…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: SUR-726783
Object type: JETTON
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A 16th century Nuremberg jetton, Lion of St Mark type with illiterate nonsense legends. c1500-1570
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: BERK-7258B2
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A worn copper alloy post-medieval token, formed from a halfpenny of George II (AD 1727-1760). The coin has been clipped to form a serrated edge around its circumference, and nearly all detail has been removed or worn away - one can just make out the left facing bust of George II. On the reverse of the coin the initials W K have been incised. Tokens were a common occurance from the 17th century, some lead tokens being crudely made while other copper alloy tokens were manufactured to much higher standards. There are a couple of examples of other tokens with serrated edges (see SUSS-72B7…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 9th December 2014
Spatial data recorded.

Record ID: WILT-725319
Object type: BRACTEATE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete copper alloy bracteate of probable post-medieval date (c. AD 1550 - 1700). The bracteate is oval in shape with an impressed design of a stylised castle with a crown in the centre flanked by the initials S and M surrounded by a pellet border. The bracteate measures 14.69mm in diameter, is 0.71mm thick and weighs 0.23g.
Created on: Tuesday 9th December 2014
Last updated: Thursday 29th December 2022
Spatial data recorded.

Record ID: NMGW-724AEC
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation
Late medieval or early post-medieval copper alloy book-clasp, of Howsam type A.3, probably of 15th to 17th century date. The clasp is near-complete, with some peripheral loss (with a length of 67.9mm, a depth of 5.3mm and a weight of 15.8g). The clasp is made from two-pieces of sheet copper alloy, attached using three rivets. One larger rivet at the centre, towards the clasp and two smaller rivets at the attachment end. Between the two sheets traces of the leather book cover survive. The front plate (0.9mm thick) is decorative and has an expanded end (with a width of 23.1mm), enhanced…
Created on: Tuesday 9th December 2014
Last updated: Monday 17th December 2018
Spatial data recorded.

Record ID: GLO-72314A
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Bath and North East Somerset
Workflow stage: Awaiting validation
Copper alloy double looped buckle with trapezoidal frames that have a trefoil forward edge, copper alloy pin still in place. Date 1600-1700
Created on: Tuesday 9th December 2014
Last updated: Wednesday 12th August 2015
Spatial data recorded.

Record ID: BUC-721E78
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A post-Medieval double-loop buckle which is largely made of copper alloy. The frame is of flat section and is sub-rectangular in plan, having rounded corners and inward-bowing top and bottom sides. Contained within opposing holes at the centre of the frame is the iron axis bar. This bar serves to attach a tongue-shaped copper-alloy plate and also the pin. There is ascallop-shaped pin rest at the centre of both the right- and left-hand ends of the frame.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 21st August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.

Record ID: BUC-72148C
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A copper-alloy double-loop buckle of medieval to post-Medieval date. The central axis bar divides the frame into two D-shaped sides. The majority of the buckle has a flat section, but the axis bar is of oval cross section and has attached iron corrosion from the otherwise missing pin.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 21st August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.

Record ID: BUC-720DCA
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A cast copper-alloy double-looped oval buckle frame of post-medieval date (c. 1550-1650). The frame has a moulded pin rest formed of a double transverse central ridge, flanked by grooves, and lobed knop at either end of the bar. The bar is slightly narrowed, and the pin is missing; iron staining to the bar indicates the use of iron for the pin. The frame has a D-shaped cross-section with the reverse being flat. The object has a pitted olive green patina. Length: 40.69mm; Width: 26.82mm; Thickness: 3.5mm; Weight: 7.44g See Whitehead (2003, 61; no. 360) for a similar buckle dated…
Created on: Tuesday 9th December 2014
Last updated: Tuesday 21st August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.

Record ID: BUC-7203E8
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A copper-alloy double-loop buckle of early post-Medieval date. The symmetrical frame has two D-shaped sides, each with a moulded rosette pin rest at the centre. The upper surfaces of the frame slope downwards and outwards; the axis bar has a sub-triangular cross section, a pointed lobe at each end and is missing its pin.
Created on: Tuesday 9th December 2014
Last updated: Tuesday 21st August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.

Record ID: BUC-71C4D9
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A copper-alloy frame, possibly from a post-Medieval buckle. The frame is rectangular in cross section and sub-rectangular in plan, having an aperture of elongated keyhole shape. There is no pin and no obvious point for the attachment of one.
Created on: Tuesday 9th December 2014
Last updated: Saturday 25th August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.

Record ID: BUC-71BD0C
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
An incomplete copper-alloy double-loop buckle of post-Medieval date. The intact side of the frame is 'D' shaped, with steep inner edges and flat upper surfaces that slope downwards and outwards. The axis bar has an oval cross section. Little remains of the other side of the frame, but the surviving portion suggests this was originally a symmetrical buckle. Looped loosely around the axis bar, the pin has a D-shaped cross section and parallel sides throughout most of its length, tapering only at the tip, which overhangs the edge of the frame.
Created on: Tuesday 9th December 2014
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.

Record ID: BUC-71B1FA
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A copper-alloy double-loop buckle of post-Medieval date. The symmetrical frame has two sides that are broadly 'D' shaped, both in plan and cross section, but with a wider, flat-surfaced, pointed pin rest at the centre of both the right- and left-hand sides. The pin, loosely looped around the central axis bar, has a trapezoidal cross section and straight sides which taper to a pointed tip.
Created on: Tuesday 9th December 2014
Last updated: Wednesday 22nd August 2018
Spatial data recorded. This findspot is known as 'Quainton', grid reference and parish protected.