Back to simple search | Back to advanced search

    You searched for:

    • Created: Wednesday 8th October 2014

  • Thumbnail image of PUBLIC-5A85D2

Record ID: PUBLIC-5A85D2
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A medieval copper-alloy folding strap-clasp The frame is sub-rectangular in plan, its horizontal sides bowing outwards slightly. A sheet metal roller has been attached to the vertical outer side of the frame, and the rectangular plate has been doubled around the axis bar. A single rivet hole, centrally located at the non-frame end, marks the point at which a rivet (now missing) would have held the plate to the strap. At the frame end, an attached piece of corroded iron wire suggests that the strap-clasp may later have been converted into a single-loop buckle by inserting a pin. The o…
Created on: Wednesday 8th October 2014
Last updated: Tuesday 5th June 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of PUBLIC-59F3A7

Record ID: PUBLIC-59F3A7
Object type: SCABBARD
Broad period: MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy sword/dagger scabbard chape of Medieval date. The chape has been made from a piece of sheet metal which has been rolled into a cone and then partially flattened. The seam is split and distorted and this exposes traces of solder within. It is presumed the seam is located at the back of the object. The chape's point is formed from a petal closure which is now very distorted. The front is scalloped at the top and there are two circular perforations, presumably decorative, which are located at different heights, a short distance down from the top, close to each edge. In …
Created on: Wednesday 8th October 2014
Last updated: Monday 9th January 2017
Spatial data recorded. This findspot is known as 'Near Lewes', grid reference and parish protected.


  • Thumbnail image of PUBLIC-59D255

Record ID: PUBLIC-59D255
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy double-loop buckle from the Late Medieval to early post-Medieval period. The symmetrical frame has two D-shaped sides, separated from one another by an oval-sectioned axis bar. The upper surfaces of the rest of the frame slope downwards and outwards, and the width gradually expands towards the centre of the outer sides, where there is a grooved pin rest. The pin, which survives intact, is of flat section and has straight sides that converge to a point. The object is distorted and there is a break in the frame,next to theaxis bar. The object has a light brown pa…
Created on: Wednesday 8th October 2014
Last updated: Tuesday 5th June 2018
Spatial data recorded. This findspot is known as 'Nr Wimborne', grid reference and parish protected.


  • Thumbnail image of WAW-59C69A

Record ID: WAW-59C69A
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval (late 13th to 14th century) buckle: The buckle has a double looped oval frame. The loops are slightly pointed at the apex, on the exterior edge. The loops expand in width towards the apex. The reverse is undecorated, and is flat. The strap bar is narrowed, and is a rounded trapezoid in section. In profile the buckle is flat. The pin is missing. The buckle frame has a slightly abraded surface with a dark green/grey patina. The buckle measures 33.83mm long and 33.17mm wide. It weighs 5.4g. Egan and Pritchard (2002) date a similar shaped buckle (No. 380) to the late 13th to 14th…
Created on: Wednesday 8th October 2014
Last updated: Monday 20th August 2018
Spatial data recorded.


  • Thumbnail image of WAW-594962

Record ID: WAW-594962
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval coin: penny of Henry VII (1485-1509) minted in York between 1485 and 1509. North No. 1727-1729.
Created on: Wednesday 8th October 2014
Last updated: Thursday 16th October 2014
Spatial data recorded.


  • Thumbnail image of WAW-58FC84

Record ID: WAW-58FC84
Object type: COIN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval coin: groat of Elizabeth I (1558 - 1603) minted in London between 1560 and 1561. North No. 1986.
Created on: Wednesday 8th October 2014
Last updated: Thursday 16th October 2014
Spatial data recorded.


  • Thumbnail image of WAW-58C6AC

Record ID: WAW-58C6AC
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval coin: penny of Edward I to III from an unknown mint. Minted between AD 1279 and 1351 in London.
Created on: Wednesday 8th October 2014
Last updated: Thursday 16th October 2014
Spatial data recorded.


  • Thumbnail image of WAW-5899F7

Record ID: WAW-5899F7
Object type: COIN
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval coin: cut farthing of Henry III (1216-72) minted in an uncertain mint possibly by Nichole between 1247 and 1272.
Created on: Wednesday 8th October 2014
Last updated: Thursday 16th October 2014
Spatial data recorded.


  • Thumbnail image of PUBLIC-589432

Record ID: PUBLIC-589432
Object type: CUTLERY
Broad period: POST MEDIEVAL
County: County of Herefordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy pastry jigger dating from the post medieval period. Only the forked attachment and the wheel survive, with the handle missing. The wheel is openwork with four radiating struts and a serrated edge, and is well worn on one half. The attachment arm is bent on one side and is attached to the jigger via a copper alloy rivet. The teeth are arranged in groups of three which is a slightly unusual feature. The surviving part is 55.1mm long, 9.1mm wide, 6.4mm thick and weighs 13.1 grams. The wheel is 30mm in diameter. It has a strong green patina. Similar examples can be seen in …
Created on: Wednesday 8th October 2014
Last updated: Monday 26th October 2015
Spatial data recorded. This findspot is known as 'Adforton', grid reference and parish protected.


  • Image not taken

Record ID: NMS-576361
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete post-medieval copper alloy hooked book clasp, almost all of the hook missing. Along the expanded proximal end about ten V-shaped notches are followed by an engraved groove. Because of damage only seven remain. A back plate of the same size and shape is secured by three rivets, each of which lies in the centre of double concentric rings. Extant length 51.5mm. Width 15 - 26mm. 16th century.
Created on: Wednesday 8th October 2014
Last updated: Thursday 9th October 2014
Spatial data recorded.


  • Image not taken

Record ID: NMS-5739DE
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper alloy button consisting of a plano-convex head with a central nipple and an integral non-drilled loop. Diameter 10.5mm. Length 13.2mm. 16th century.
Created on: Wednesday 8th October 2014
Last updated: Thursday 9th October 2014
Spatial data recorded.


  • Image not taken

Record ID: NMS-56FF61
Object type: PURSE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete tin coated copper alloy pendent loop from a medieval to post-medieval purse frame, round-sectioned with four integral attachment loops, one truncated by a break. At the other end there is a 3mm diameter and 2mm deep blind hole, the purpose of which is uncertain. A smaller blind hole near one of the loops is probably a casting flaw. Length 92.5mm. Diameter of cross-section 5 - 5.5mm. Width at loops 7.5 - 8mm. c.1450 - c.1550.
Created on: Wednesday 8th October 2014
Last updated: Thursday 9th October 2014
Spatial data recorded.


  • Image not taken

Record ID: NMS-567DBB
Object type: BUCKLE
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Just over half of a medieval to post-medieval tin coated copper alloy double-looped buckle frame, both loops oval, with a notch in the angled centre of the edge. Estimated length 40mm. Width 23.6mm. c.1450 - c.1550.
Created on: Wednesday 8th October 2014
Last updated: Thursday 9th October 2014
Spatial data recorded.


  • Thumbnail image of NMGW-563E6C

Record ID: NMGW-563E6C
Object type: COIN
Broad period: ROMAN
County: Rhondda Cynon Taf
Workflow stage: Awaiting validation Find awaiting validation
Roman silver coin Trajan (AD 98-117) denarius, Rome COS V / SPQR OPTIMO PRINCIPI FIDES RIC 176 (C. 103-11) 2.34g, corroded
Created on: Wednesday 8th October 2014
Last updated: Tuesday 14th October 2014
Spatial data recorded.


  • Thumbnail image of NMGW-562322

Record ID: NMGW-562322
Object type: COIN
Broad period: POST MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver coin Henry VII (1485-1509) half groat, London Class IIIa (double-arched crown) Privy mark: Lys North 1708 0.64g, lose fragment
Created on: Wednesday 8th October 2014
Last updated: Tuesday 14th October 2014
Spatial data recorded.


  • Thumbnail image of DOR-5611A3

Record ID: DOR-5611A3
Object type: BROOCH
Broad period: IRON AGE
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Iron Age or Roman Aesica variant brooch dating to the period c. AD 43 - 100. The brooch is missing one wing due to an old break, The surviving wing is cylindrical in form and the iron pin bar is visible within. It has a damaged tip. It features two pairs of incised vertical grooves, one pair near the tip of the wing and the other next to the bow. The head extends back into the bow, and curves along its length. It features two incised longitudianl groove which follow the curvature of the bow. The lower bow is circular in plan and measures 18.06mm in diamet…
Created on: Wednesday 8th October 2014
Last updated: Tuesday 16th June 2015
Spatial data recorded. This findspot is known as 'Tarrant Launceston', grid reference and parish protected.


  • Thumbnail image of NMGW-560F50

Record ID: NMGW-560F50
Object type: COIN
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Henry V (1413-1422) halfpenny, London annulets by hair 0.39g, nibbled
Created on: Wednesday 8th October 2014
Last updated: Tuesday 11th November 2014
Spatial data recorded.


  • Thumbnail image of NMGW-55F4A1

Record ID: NMGW-55F4A1
Object type: COIN
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Henry VI (1422-61) halfpenny, Calais Annulets Issue (1422-7) 0.51g, some wear
Created on: Wednesday 8th October 2014
Last updated: Tuesday 14th October 2014
Spatial data recorded.


  • Thumbnail image of NMGW-55DAF0

Record ID: NMGW-55DAF0
Object type: COIN
Broad period: MEDIEVAL
County: the Vale of Glamorgan
Workflow stage: Awaiting validation Find awaiting validation
Medieval silver coin Edward I (1272-1307) penny, York (royal) Class 9b1 (c. 1299-1302) 1.27g, incomplete
Created on: Wednesday 8th October 2014
Last updated: Tuesday 14th October 2014
Spatial data recorded.


  • Thumbnail image of HAMP-55C85A

Record ID: HAMP-55C85A
Object type: END SCRAPER
Broad period: NEOLITHIC
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A probably Early Neolithic (4000-2700 BC) side-and-end scraper, with a few spots of cortex on the dorsal face and at the proximal end. The flint has long, scaled abrupt retouch to the right dorsal edge and short scaled abrupt retouch at the dorsal distal end. There is possible short, scaled semi-abrupt retouch to the left dorsal edge. The flint is a blue-grey in colour with some light patination spots on both faces. The scraper measures 73.71x53.61x12.45mm and weighs 59.29g.
Created on: Wednesday 8th October 2014
Last updated: Wednesday 8th October 2014
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 325
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 370
  • Mean quantity: 1.138
  • Maximum: 20

Filter your search

1 - 20 of 325 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.