Back to simple search | Back to advanced search

    You searched for:

    • Created: Friday 1st August 2014

  • Image not taken

Record ID: NMS-BC3130
Object type: DRESS HOOK
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Distorted medieval gilt copper alloy dress hook with one attachment hole near the rounded proximal end. The blunt hook has been bent to an almost straight position. Gilding is restricetd to the very slightly convex front face. Present length 31.3mm. Width 9mm. Thickness 1.7mm. Perhaps 13th or 14th century.
Created on: Friday 1st August 2014
Last updated: Friday 1st August 2014
Spatial data recorded.


  • Thumbnail image of NMS-BC074C

Record ID: NMS-BC074C
Object type: STRAP END
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Medieval "shield-shaped" sheet copper alloy strap end with a bar-mount and two rivet holes. Four notches have produced a shape that is a trefoil and not scutiform. The bar-mount, of arched cross-section and with a recess on the underside (cf. Egan and Pritchard 1991, no. 738) is attached with a rivet. Between a square rove and the reverse a small piece of textile is preserved. 17.5 x 11mm. Mount 5.7 x 11mm. Second half 14th century.
Created on: Friday 1st August 2014
Last updated: Tuesday 5th July 2016
Spatial data recorded.


  • Thumbnail image of NMS-BB711C

Record ID: NMS-BB711C
Object type: HAIR PIN
Broad period: ROMAN
County: Norfolk
Workflow stage: Published Find published
Incomplete probably Roman silver hair pin, most of the shank missing. The upper half of the biconical head is very uneven, miscast or damaged, while on the lower half a ring of pellets surrounds the springing of the pin. What is left of the shank is badly distorted. No close parallel noted. Diameter of head 7mm. Weight 1.50g. Mid 1st - 4th century.
Created on: Friday 1st August 2014
Last updated: Monday 20th April 2015
Spatial data recorded.


  • Thumbnail image of BH-BB5AB9

Record ID: BH-BB5AB9
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy As (probably), dating to the 1st or 2nd century AD. Diameter: 24.1mm; thickness: 2.7mm. Weight: 6.23g.
Created on: Friday 1st August 2014
Last updated: Friday 1st August 2014
Spatial data recorded. This findspot is known as 'Braughing', grid reference and parish protected.


  • Thumbnail image of BH-BB2E0D

Record ID: BH-BB2E0D
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy As of Gordian III, dating to AD 240 (Reece period 12). AEQVITAS AVG S C reverse depicting Aequitas standing front, head left, holding scales and cornucopiae. Mint of Rome. RIC IV (part III), p. 47, no. 286(b). Diameter: 21.3mm; thickness: 3.4mm. Weight: 6.06g.
Created on: Friday 1st August 2014
Last updated: Friday 1st August 2014
Spatial data recorded. This findspot is known as 'Braughing', grid reference and parish protected.


  • Image not taken

Record ID: NMS-BB19DD
Object type: BROOCH
Broad period: IRON AGE
County: Norfolk
Workflow stage: Published Find published
Fragment of a Late Iron Age to Early Roman copper alloy Rosette brooch, the lower end of the bow and a small part of the rosette or plate. Cf. Hattatt 2000, fig. 167, no. 278. Extant length 15mm. c.30 - c.65 AD.
Created on: Friday 1st August 2014
Last updated: Saturday 13th December 2014
Spatial data recorded.


  • Thumbnail image of GAT-BB042D

Record ID: GAT-BB042D
Object type: BROOCH
Broad period: ROMAN
County: Isle of Anglesey
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch with enamel inlay. The wings are located right at the end of the head and are circular in section with rearward facing lugs. The edges of the lugs are decorated with a single recessed line and in the centre of the end of one wing there is a slight raised knop visible (perhaps destroyed by corrosion on the other). The wings flare as they meet the head forming a shoulder, the edge of which is decorated with a ring of short recessed lines. Two recessed lines also run along the bottoms of the wings apparently marking where the edges of the semi-circular wings on a 'spr…
Created on: Friday 1st August 2014
Last updated: Monday 26th October 2015
Spatial data recorded.


  • Thumbnail image of NMS-BAD654

Record ID: NMS-BAD654
Object type: PLATE BROOCH
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete Roman round, gilt copper alloy plate brooch in rather abraded condition, the pin, and parts of the edge, catchplate, single pin lug and centre-boss missing. Mackreth 2011, 162, Type 3.b4. Much of the reverse is obscured by a deposit of corrosion products, rust and mineralised plant material, but tinning is visible. There are two circular zones around the centre, both with closely spaced part-circular stamped impressions (Mackreth 2011, fig. 2 no. 5). Diameter 33.5mm. c.175 - c.300 AD.
Created on: Friday 1st August 2014
Last updated: Tuesday 5th July 2016
Spatial data recorded.


  • Thumbnail image of HAMP-BAC509

Record ID: HAMP-BAC509
Object type: COIN
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A Medieval penny of Edward I / II (1272-1307; 1307-27), class 10cf (1305-10), minted at Canterbury. Reference: North 1040-42. The coin is very worn and bent with a split edge.
Created on: Friday 1st August 2014
Last updated: Friday 1st August 2014
Spatial data recorded.


  • Thumbnail image of HAMP-BAA0C9

Record ID: HAMP-BAA0C9
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A Post-Medieval sixpence of Charles I (1625-49), Tower mint, group E, fifth bust, dating to 1636-8 (tun initial mark on obverse). Reference: North 2243. The coin is slightly double struck, very worn, particularly the obverse, and neatly clipped around.
Created on: Friday 1st August 2014
Last updated: Friday 1st August 2014
Spatial data recorded.


  • Thumbnail image of BH-BA954E

Record ID: BH-BA954E
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy As of uncertain emperor, dating from the late 1st to early 2nd century AD. Diameter: 26mm; thickness: 2.8mm. Weight: 6.32g.
Created on: Friday 1st August 2014
Last updated: Friday 1st August 2014
Spatial data recorded. This findspot is known as 'Braughing', grid reference and parish protected.


  • Image not taken

Record ID: NMS-BA70DA
Object type: FURNITURE FITTING
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy furniture mount, a "bell-shaped stud" with the remains of an iron shank embedded in the underside. Very similar to Allason-Jones and Miket 1984, no.3.889. Diameter 33-4mm. Height (excluding iron) 24mm. Mid 1st - 4th century.
Created on: Friday 1st August 2014
Last updated: Friday 1st August 2014
Spatial data recorded.


  • Thumbnail image of DENO-BA5172

Record ID: DENO-BA5172
Object type: MOUNT
Broad period: UNKNOWN
County: Nottinghamshire
Workflow stage: Published Find published
Lozenge shaped object, possibly a mount. It is made of sheet silver covering a copper alloy core. A copper alloy rivet is present at both ends. The sheet silver is of moulded design and gilded, and covers one side of the object. In the centre of the relief is a quatrefoil surrounded by a large foliate design. On the reverse side the sheet silver can be seen overlapping the edges. Four small sub-oval marks located directly opposite the indentations seen on the front of the relief design may indicate the points of attachment. The function of the mount is unknown. Due to its undia…
Created on: Friday 1st August 2014
Last updated: Monday 3rd October 2016
Spatial data recorded. This findspot is known as 'Harworth Area', grid reference and parish protected.


  • Thumbnail image of BH-BA4C71

Record ID: BH-BA4C71
Object type: COIN
Broad period: ROMAN
County: Hertfordshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy dupondius of Marcus Aurelius (AD 139 - 180) or Commodus (AD 175 - 192). Diameter: 24.9mm; thickness: 3.8mm. Weight: 11.3g.
Created on: Friday 1st August 2014
Last updated: Friday 1st August 2014
Spatial data recorded. This findspot is known as 'Braughing', grid reference and parish protected.


  • Thumbnail image of HAMP-BA3705

Record ID: HAMP-BA3705
Object type: JETTON
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A later medieval jetton of the 'Shield of France (modern)' type struck at Tournai under Charles VI (1380-1422), the 'star' series. The jetton has some wear and a little damage to the edge. Reference: see Mitchiner 452 for a similar jetton.
Created on: Friday 1st August 2014
Last updated: Monday 10th April 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-BA2FA6
Object type: POT
Broad period: ROMAN
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Roman greyware pottery basal sherd, the complete base present. Diameter 58mm. Weight 42g. Mid 1st - 4th century.
Created on: Friday 1st August 2014
Last updated: Friday 1st August 2014
Spatial data recorded.


  • Thumbnail image of SF-BA1858

Record ID: SF-BA1858
Object type: BUCKLE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper-alloy double-looped circular buckle frame of Medieval to Post-Medieval date. It is missing the pin. It is oval in section with a flat back face. The front face is decorated with six evenly spaced expanded rosettes or trefoils. The frame between the rosettes is decorated with a series of diagonal grooves. The bar is central and oval in section. This buckle measures 55.42mm in diameter, 5.44mm in thickness, 27.49g in weight. There is a similar example from Norwich (Margeson, 1993, p.29, no. 158). Also compare NMS-49D387.
Created on: Friday 1st August 2014
Last updated: Friday 24th November 2017
Spatial data recorded. This findspot is known as 'Felixstowe', grid reference and parish protected.


  • Thumbnail image of SF-BA0F02

Record ID: SF-BA0F02
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation Find awaiting validation
A complete cast lead uniface token of probable Post-Medieval date. It is flat with moulded decoration on one face. Consisting of a central wavey line. One side of the wavey line depicts an S with pellet ends, as well as two diagonal ridges. There is also a rectangular perforation. The other side of the wavey line depicts a series of diagonal ridges and pellets. On this side of the token there is another rectangular perforation and a rectangular indentation. This token measures 26.67mm in diameter, 2.40mm in thickness, 9.18g in weight. Similar tokens are noted by Mitchiner an…
Created on: Friday 1st August 2014
Last updated: Friday 1st August 2014
Spatial data recorded. This findspot is known as 'Risby', grid reference and parish protected.


  • Image not taken

Record ID: NMS-BA00C6
Object type: STRAP END
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete, distorted copper alloy sheet object, probably part of a plate from a medieval strap end, or perhaps of a medieval buckle or clasp plate. The sides are parallel. One end is straight, with a rivet close by, and the other is broken. Width 10.5mm. Extant length c.25mm. Perhaps 14th century.
Created on: Friday 1st August 2014
Last updated: Friday 1st August 2014
Spatial data recorded.


  • Thumbnail image of LVPL-B9E9CE

Record ID: LVPL-B9E9CE
Object type: COIN
Broad period: POST MEDIEVAL
County: Cheshire East
Workflow stage: Published Find published
A post-medieval cast lead-alloy imitation of a 8 Reales of Charles III of Spain (1759-88). A casting line is visible around the edge of the coin and the surface is dark grey and pitted. The specific coin copied appears to be an 8 Reales from the Mexico City mint under the assayers Francisco Antonio de la Pena y Flores and Manuel de la Rivera (mint mark M with o above; assayers marks F M). Dated AD 1772.
Created on: Friday 1st August 2014
Last updated: Friday 5th September 2014
Spatial data recorded. This findspot is known as 'Prestbury', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 150
Search server index: asgard

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 183
  • Mean quantity: 1.220
  • Maximum: 13

Filter your search

1 - 20 of 150 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.