Record ID: LVPL-92D48E
Object type: DIVIDERS
Broad period: POST MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A pair of cast copper-alloy dividers of Post-medieval date. They are mathematical or surveyor's dividers and have a globular knopped handle at the hinge. There is a small ridge just below the knop on the outer edge of each of the arms. The upper sections of each arms is flattened and one is recessed to accomodate the other. The arms then become d-shaped in section. There are some decorative facets on the inner edges of the arms near the flattened upper section. The recorder has not seen the object and the photograph was not taken by the recorder. Identification has been from the ph…
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'Cley next the Sea', grid reference and parish protected.

Record ID: LVPL-92B316
Object type: BELL
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A cast copper-alloy clapper bell of Medieval or Post-medieval date. It is a cone shape and has an integrally cast semi-circular loop on the top which is pierced by a circular hole. There are a series of triangular holes around the top edge. The clapper is present but is no longer attached due to old breaks. The photograph was not taken by the recorder and due to the angle accurate measurements can not be provided.
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'Scrayingham', grid reference and parish protected.

• 

  Image not taken

Record ID: FASAM-929B96
Object type: COIN
Broad period: ROMAN
Workflow stage: Published
Copper alloy nummus of Helena, dating to AD 337-40 (Reece Period 17), PAX PVBLICA, Pax standing left. Mint unclear.
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
No spatial data available.

Record ID: LVPL-9296CB
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A cast copper-alloy thimble of Post-medieval date. It is dome shaped and complete and the rim is thickened. The holes are circular and extend in a spiral from the top centre of the dome to the rim.
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'Bossall', grid reference and parish protected.

• 

  Image not taken

Record ID: FASAM-92721B
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Published
Copper alloy nummus of the House of Constantine - CONSTANTINOPOLIS - dating to AD 330-5 (Reece Period 17), Victory on prow. Mint of Trier. RIC VII, p. 217, cf. no. 548.
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'North West Leicestershire', grid reference and parish protected.

• 

  Image not taken

Record ID: FASAM-925F82
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Published
Copper alloy nummus of the House of Constantine - CONSTANTINOPOLIS - dating to AD 330-5 (Reece Period 17), Victory on prow. Mint of Trier.
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'North West Leicestershire', grid reference and parish protected.

Record ID: LVPL-922358
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A cast copper-alloy rotary key of Medieval date. It is cast in a single piece and has a circular bow which is oval in section. The stem is solid and also oval in section and the bit is symmetrical.
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'Buttercrampe', grid reference and parish protected.

Record ID: KENT-91E2BD
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
An Early Medieval copper alloy cruciform mount of 6th to 10th century date. The cruiciform if formed of four projections emanating from a raised convex boss in the center. The projections all have concave sides and have rounded terminals. Each terminal has been perforated with an irregular circular rivet holes, all of which retain an iron rivet. The central boss is decorated with four small drilled circular perforations. The reverse of the boss is concave and appear of show signs of gilding. The mount is 23.6mm long, 23.5mm wide, 6.9mm thick and weighs 6.82grams. A mount of a si…
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded.

Record ID: KENT-918F8E
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation
An Early Medieval copper alloy cruciform mount of probably 6th to 10th century date. The cruiciform if formed of four projections emanating from a raised convex boss in the center. The projections all have concave sides and have rounded terminals. East terminal has been perforated with an irregular circular rivet hole, two of which have been broken by an old break. One perforations retains an iron rivet and there are signs of iron staining on the other perforations. The central boss is decorated with four small drilled circular peroforations. The reverse of the boss is concave and is …
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded.

Record ID: LVPL-919412
Object type: SPUR
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy rowel spur dating to the Post-Medieval period, (1500-1700). The spur is formed of two curved arms, both of which are incomplete, the neck and box of a rowel spur. The arms are D-shaped in cross section and curved. The neck of the object is lozenge shaped in cross-section and curves downwards towards the split terminal. Each side of the terminal contains a rivet hole which would have attached to the rowel. One arm is decorated with a double row of spirals consisting of a series of punched c-shapes. Each row is divided by a series of small vertical inc…
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'Selby area', grid reference and parish protected.

Record ID: GLO-918703
Object type: BROOCH
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation
Copper alloy Polden Hill type brooch that has the remians of rearward facing lugs on either end of the wings that would have held the the pin axis bar (the left wing is truncated). The lower part of the bow is missing resulting in the loss of the catch plate. Date 80-120AD
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'cotswolds', grid reference and parish protected.

Record ID: SF-9171F9
Object type: BROOCH
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete copper-alloy oval plate brooch of Roman date. Only the central boss survives, the remainder of the object is missing due to old breaks, now worn. The front face has a central hollow, still containing traces of red enamel. The back face is flat and has traces of the adhesive that would have connected it to the now missing brooch. This brooch measures 13.92mm in length, 11.24mm in width, 3.59mm in thickness, 2.10g in weight. There are similar examples recorded by Hattatt (Hattatt, 1987, p. 257, 1207-1208).
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'Ousden', grid reference and parish protected.

Record ID: SF-901EC2
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy sword belt decorative plate of Post-Medieval date. It is a flattened D-shape in section with a flat back face. There is a central triangular plate with a trilobite terminal at one end and two smaller projecting lobes at the other from which extend an integrally cast hook. The hook is U-shaped in form, circular in section and bends forwards into a globular terminal. There is a pair of circular rivet holes, still containing the corroded remains of separate iron rivets. The front face is decorated with foliate decoration. The back face is flat and undecorated …
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'Lidgate', grid reference and parish protected.

Record ID: HAMP-914004
Object type: BOOK FITTING
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete cut sheet copper alloy probable Medieval to Post Medieval (1400-1600) probable book clasp, missing one terminal and with damage to the other terminal. It appears to have no decoration. The object is an elongated diamond-shape 13.65mm wide and 1.09mm thick, with a jagged but worn break to one of the elongated ends. At the opposite end a collar 2.83mm wide and 14.66mm in length flanks the expanded terminal, 11.60mm wide at the collar and 51.08mm wide at its worn crenellated edge. At the centre is an iron rivet in situ. The object is worn and has possibly been bent and re…
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded.

• 

  Image not taken

Record ID: SF-900D6C
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of cast copper-alloy, probably metal working debris or casting waste. It is of uncertain Bronze Age or later date. It is sub-rectangular in form with globular protrusions. It measures 13.31mm in length, 10.43mm in width, 3.64mm in thickness, 1.55g in weight.
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'Ousden', grid reference and parish protected.

Record ID: LVPL-8FFE7E
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A cast copper alloy two piece swivel probably dating to the Medieval period. The object has a D-shaped loop which measures 13.48mm in width and a smaller circular loop measuring 8.86mm in diameter. The join between the two loops is oval in section with a collar running around the circumference. The two halves are connected by a socket on the base of the larger loop and a bolt on the top of the smaller loop, the end of which is cone shaped. The collar is decorated with four circumferential grooves. The object has a blackish green patina and is in good condition.
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'Selby area', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-8FE6CC
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of cast copper-alloy, probably metal working debris or casting waste. It is of uncertain Bronze Age or later date. It is sub-rectangular in form with globular protrusions and a pitted outer surface. It measures 26.98mm in length, 23.97mm in width, 10.24mm in thickness, 21.93g in weight.
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'Ousden', grid reference and parish protected.

Record ID: LVPL-8ED172
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A cast copper alloy hooked tag of Post-medieval date. It is a shield shaped tag which is decorated with a central foliate design surrounded by punched annulets. The attachement loops are still present.
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'Bossall', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-8FC9AF
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of cast copper-alloy, probably metal working debris or casting waste. It is of uncertain Bronze Age or later date. It is sub-rectangular in form with globular protrusions and a pitted outer surface. It measures 30.64mm in length, 17.93mm in width, 12.19mm in thickness, 20.55g in weight.
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'Lidgate', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-8FBBDE
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
County: Suffolk
Workflow stage: Awaiting validation
A fragment of cast copper-alloy, probably metal working debris or casting waste. It is of uncertain Bronze Age or later date. It is sub-rectangular in form with globular protrusions and a pitted outer surface. It measures 15.67mm in length, 8.62mm in width, 8.52mm in thickness, 3.25g in weight.
Created on: Friday 18th July 2014
Last updated: Friday 18th July 2014
Spatial data recorded. This findspot is known as 'Lidgate', grid reference and parish protected.